MODIFICATION
72 -- Marine Flooring
- Notice Date
- 9/7/2006
- Notice Type
- Modification
- NAICS
- 238330
— Flooring Contractors
- Contracting Office
- Department of the Navy, Naval Supply Systems Command, FISC NORFOLK ACQUISITION GROUP, CODE 200 1968 GILBERT STREET, SUITE 600, NORFOLK, VA, 23511-3392
- ZIP Code
- 23511-3392
- Solicitation Number
- Reference-Number-V218536214CT99
- Response Due
- 9/12/2006
- Archive Date
- 9/27/2006
- Point of Contact
- Doreen Hyde, Contract Specialist, Phone 757-443-1371, Fax 757-443-1402,
- E-Mail Address
-
doreen.hyde@navy.mil
- Small Business Set-Aside
- Total Small Business
- Description
- The purpose of this amendment is to revise the specifications provided herein: AMENDMENT 0001 Description as follows: CLIN 0001: Polished Porcelain Tile. Contractors shall provide pricing for the following qualified product: Crossville polished porcelain tile category: (1) regular field tile 14,437 SF, size 12? x 12? style Sea Mist A585; (2) custom heavy field tile ?? thick, 2,670 SF , size 12? x 12? style Sea Mist A585; (3) Border tiles 900SF, size 12? x 12? style Lapis B180. Contractor shall provide and install polished porcelain tile deck covering. No QPL or Mil-Spec currently exists for these materials. All products must meet the requirements of commercial standard A137.1. A copy of this standard can be obtained from: Tile Council of America, Inc., 100 Clemson Research Blvd., Anderson, SC 29625, phone: 864-646-8453, fax:864-646-2821, URL: http:/www.tileusa.com. Contractor shall Contractor shall remove existing deck covering down to bare metal surface. Prepare and prime deck surface in accordance with NSTM Section 631. Install an underlayment, adhesive and grout that is epoxy based. The cement based underlayment products available will not hold up under forklift traffic. The compressive strength is not high enough, and the underlayment has been seen to crumble, leading to failures and breakage of the porcelain tiles. Additionally, the underlayment may not fully cure in the center of the non-permeable tiles. Therefore, contractor shall provide ultra-lightweight underlayment (<1.0 lb/sf @ 1/4") that meets QPL-3135, Type II, Class 2, and that the adhesive and grout are also epoxy based. Install approved underlayment to level surface and cover any raised areas across the surface area. Install new porcelain tiles throughout entire areas specified iaw best commercial standards for this type of product and the fact that it is being installed on board a U.S. Navy ship. A rubber leveler coat is authorized once underlayment base is established. Contractor shall understand how critical this deck leveling stage is to the overall success of the installation. An non-leveled surface could result in deck failure and be reason for contract default for latent defect and or non-conformance to the specifications herein. Recommend using a 3/8 notched trowel and back butter the tile 100% for a nice level setting bed when installing border and field tiles. Ship's representative shall choose Crossville tile style, size, color selection and final design. Contractors need to certify upon submission of their proposals that they are quoting iaw RFQ and Amendment 0001. ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ This is a combined synopsis/solicitation for commercial items prepared in accordance with the format prescribed in Subpart 12.6 of the Federal Acquisition Regulation (FAR), as supplemented with additional information included in this notice. This announcement constitutes the request for quote for the required item under V218536214CT99. A subsequent solicitation document will not be issued. FISC Norfolk intends to purchase the following item(s) utilizing the Test Program for Certain Commercial Items in FAR 13.5. Line items are for Marine Flooring as requested by the USS Harry S. Truman (CVN-75). Description as follows: CLIN 0001: Polished Porcelain Tile. The following range of pricing for materials is provided in order to ensure an adequate selection of polished porcelain tile for ship to chose from; (1) 18 x 18 NTE $5.00 per SF; (2) Border tiles NTE $64 per LF. Contractor shall provide and install polished porcelain tile deck covering. No QPL or Mil-Spec currently exists for these materials. All products must meet the requirements of commercial standard A137.1. A copy of this standard can be obtained from: Tile Council of America, Inc., 100 Clemson Research Blvd., Anderson, SC 29625, phone: 864-646-8453, fax:864-646-2821, URL: http:/www.tileusa.com. Contractor shall remove exi NOTE: THIS NOTICE WAS NOT POSTED TO FEDBIZOPPS ON THE DATE INDICATED IN THE NOTICE ITSELF (07-SEP-2006); HOWEVER, IT DID APPEAR IN THE FEDBIZOPPS FTP FEED ON THIS DATE. PLEASE CONTACT fbo.support@gsa.gov REGARDING THIS ISSUE.
- Web Link
-
Link to FedBizOpps document.
(http://www.fbo.gov/spg/DON/NAVSUP/N00189/Reference-Number-V218536214CT99/listing.html)
- Place of Performance
- Address: Norfolk, Virginia
- Zip Code: 23511
- Country: UNITED STATES
- Zip Code: 23511
- Record
- SN01137311-F 20060909/060907224849 (fbodaily.com)
- Source
-
FedBizOpps Link to This Notice
(may not be valid after Archive Date)
| FSG Index | This Issue's Index | Today's FBO Daily Index Page |