MODIFICATION
J -- Gym Equipment Maintenance
- Notice Date
- 9/18/2006
- Notice Type
- Modification
- NAICS
- 423910
— Sporting and Recreational Goods and Supplies Merchant Wholesalers
- Contracting Office
- Department of the Air Force, Pacific Air Forces, 3 CONS - Elmendorf, 10480 22nd Street, Elmendorf AFB, AK, 99506-2500, UNITED STATES
- ZIP Code
- 99506-2500
- Solicitation Number
- Reference-Number-F1W3Q46240A100
- Response Due
- 9/22/2006
- Archive Date
- 10/7/2006
- Point of Contact
- Walter Garrett, Contract Admistrator, Phone 907-552-3724, Fax 907-552-7497, - Brian Brown, Contract Specialist, Phone 907-552-5607, Fax 907-552-7496,
- E-Mail Address
-
walter.garrett@elmendorf.af.mil, brian.brown@elmendorf.af.mil
- Small Business Set-Aside
- Total Small Business
- Description
- This is an amendment to the combined synopsis/solicitation for Solicitation Number: Reference-Number-F1W3Q46240A100 posted 15 September 2006. This amendment is to add the Performance Work Statement and equipment list for the synopisis/solicitation stated above. PERFORMANCE WORK STATEMENT PREVENTATIVE MAINTENANCE OF CARDIOVASCULAR AND WEIGHT EQUIPMENT 1. SCOPE OF WORK 1.1. Contractor shall furnish all labor, materials, transportation and equipment necessary to inspect and repair cardiovascular and weight equipment in accordance with (IAW) the PWS. 1.2. The Fitness Center Director or designated representative will approve all parts up to $2,500.00 prior to being installed on equipment. If repair parts exceed $2,500.00, approval is required by the Contracting Officer, All replacement parts required for maintaining equipment will be ordered within 24 hours from time of approval 2. PERSONNELL 2.1. The contractor or designated representative shall meet with the Government personnel designated by the Contracting office to discuss immediate problems. The contractor shall provide the telephone number of the person(s) to call should the need arise. 2.2. The contractor will provide documentation substantiating their service technicians are qualified to service and maintain this equipment identified in the PWS 3. EMPLOYEE IDENTIFICATION 3.1. Contractor personnel must be recognizable as such while in the fitness and community centers. This should be accomplished by wearing distinctive athletic attire. The contractor is responsible for acquiring and maintaining and appropriate number of uniforms to meet their need and their expense. 4. SPECIFIC DUTIES 4.1 Upon arrival, the contractor will work continuously until the repair(s) is completed per the manufacturer?s specifications. The only exception is a delay due to waiting for replacement parts. The contractor will respond to unscheduled service calls within 24 hours of notification. 4.2 Perform preventative maintenance on an as needed basis, at leas twice per week, to include adjusting equipment to manufacture specifications and replacement of worn parts. Coordinate all maintenance with the Fitness Center Director or designee. Equipment to be maintained as follows: 4.2.1 Strength Machines: Inspect cables, bands, bolts, and handgrips. Ensure guide rods are lubricated weekly and are free of buildup. Internal preventative maintenance. 4.2.2 Bikes: Each month, or when needed, check handrails, pedals, and ensure shroud is secure. 4.2.3 Steppers/Step Mills: Clean the step chain assemblies with mild degreaser then re-lubricate with 30W motor oil. Clean the bearing plate with mild degreaser then re-lubricate with multi-purpose grease. Lubricate the step hinges with 30W motor oil or light bearing grease. Lubricate the drive chain with 30W motor oil. Lubricate the step chain assemblies wit 30W motor oil. Inspect the timing belt for any damage. Adjust if necessary. Inspect the frame for rust, chipping paint, or bubbling. Touch up as needed. 4.2.4 Treadmills: Inspect the running belt for alignment and tension. Ensure the power cord is not under the treadmill and away from the elevation screw. Inspect the inside surface of the running belt and the top surface of the running deck for unusual wear. Check whether the belt feels glazed (a smooth almost melted appearance.) Inspect the display panel/keypad for wear. Remove motor shroud and suspend it from the display neck with a Bungee Cord. Vacuum around the motor and its ventilation holes; avoid bumping or damaging parts normally covered by the shroud. To ensure the longevity of the running belt, clean under the running belt with a soft, dry cloth. To clean, slide the cloth between the running belt and deck from one side of the frame to the other. Then hold the edges of the cloth, pull the cloth from the head-roller down to the tail-roller. Wipe the elevation screws down with a clean, dry cloth and coat them with silicon lubricant spray to prevent rust accumulation. Re-wax running deck every 2000 miles. 4.2.5 Cross Trainers: Inspect arms to make sure they are not loose. Inspect and clean back of machine, etc. 4.2.6 Spinning Bikes: Inspect bikes for loose parts weekly, especially pedals. Perform preventative maintenance on spinning bikes. 4.3 Recover old and torn strength machine pads. 5. EQUIPMENT 5.1 Please see the Excel spreadsheet titled Equipment List - F1W3Q46240A100 for the complete list of equipment that must be maintained. 6. MISCELLANEOUS 6.1 The fitness center will have service manuals on-site for the contractor to reference. Any manuals required in addition to the manufacturer?s manual shall be provided by the time contractor at his or her expense 6.2 The Fitness Center Director or designee is required to sign all service reports, verifying the satisfactory completion of the service(s) performed. 6.3 A copy of the monthly invoice shall be provided to the Fitness Center Director or designee. Fitness Center/Arctic Oasis Equipment List Cardio Equipment Treadmill 15 Upright Bike 6 Recumbent Bike 12 Stepper/Climber 7 Elliptical/Total Body 28 Spinning Bikes 25 Sub-Total 93 Strength Machines Leg Press 3 Bench Press 2 Overhead Press 2 Cable Lat Pulldown 5 Compound Row 2 Leg Extension 2 Leg Curl 2 Pec Dec Fly 2 Arm Curl 2 Tricep Press 2 Crunch 2 Back Extension 2 Standing/Seated Calf 2 Cable Crossover 2 High/Low Pull 3 Seated Leg Abduction 2 Seated Leg Adduction 2 Asst Dip/Chin 2 Sub-Total 41 Free Weights Power Rack 1 Smith Machine 2 Combo Pull-up/Dip 1 Olympic Bench 3 Olympic Incline Bench 2 Olympic Decline Bench 2 Adj Incline Bench 4 Hack Squat 1 Incline Leg Press 1 Preacher Curl 2 Beauty Bell Set 2 5-50 lb Dumbbell Set 2 5-100 lb Dumbbell Set 2 Donkey Calf plate loaded 1 T-Bar row plate loaded 1 45 Degree Back Extension 1 knee raise benches 2 decline ab benches 2 Sub-Total 32 Arctic Oasis Treadmill 10 Elliptical 8 Stepper 3 Bike 7 Benches 2 Weight Machines 13 Sub Total 43 Grand Total of Equipment 209 NOTE: THIS NOTICE WAS NOT POSTED TO FEDBIZOPPS ON THE DATE INDICATED IN THE NOTICE ITSELF (18-SEP-2006); HOWEVER, IT DID APPEAR IN THE FEDBIZOPPS FTP FEED ON THIS DATE. PLEASE CONTACT fbo.support@gsa.gov REGARDING THIS ISSUE.
- Web Link
-
Link to FedBizOpps document.
(http://www.fbo.gov/spg/USAF/PAF/3CS/Reference-Number-F1W3Q46240A100/listing.html)
- Place of Performance
- Address: 10480 22nd St Elmendorf AFB, AK
- Zip Code: 99506
- Country: UNITED STATES
- Zip Code: 99506
- Record
- SN01147759-F 20060920/060918224042 (fbodaily.com)
- Source
-
FedBizOpps Link to This Notice
(may not be valid after Archive Date)
| FSG Index | This Issue's Index | Today's FBO Daily Index Page |