SOURCES SOUGHT
66 -- Barany Chair
- Notice Date
- 9/20/2006
- Notice Type
- Sources Sought
- NAICS
- 334516
— Analytical Laboratory Instrument Manufacturing
- Contracting Office
- Department of the Air Force, Direct Reporting Units, USAF Academy - 10 MSG/LGC, 8110 Industrial Drive Suite 200, USAF Academy, CO, 80840-2315
- ZIP Code
- 80840-2315
- Solicitation Number
- FA7000-06-T-0167
- Response Due
- 9/25/2006
- Archive Date
- 10/10/2006
- Description
- THIS IS A SOURCES SOUGHT ONLY. The US Air Force Academy has an UNFUNDED FY06 requirement for 1 Ea Barany Chair. The following information are the government specifications: Power source: Must be able to operate on standard electrical source, i.e., 110V or 220V (110V preferred). Occupants: Chair must accommodate male and female adult users from 5th ? 95th percentile in sitting height. Must accommodate a minimum weight range of 110 ? 250 lbs. Size: Chair must be able to operate in a space no larger than 12 ft wide, 12 feet deep, and 9 feet high. This requirement is for the chair only and does not include operator control mechanism. Axes of motion: Must be capable of 360 degrees of continuous rotation in pitch and roll axes. Operator control: Must be able to rotate in each axis independently or in two axes simultaneously. Operator must be capable of setting rotation speed and acceleration prior to rotation, and must be able to stop rotation at any time. Speed of rotation: Must have the capability of setting specific rotation rates in each axis in minimum increments of 6 degrees/second. Minimum rotation speed is at least 6 degrees/second (lower is acceptable). Maximum rotation speed is at least 120 degrees/second in each axis (higher rates are acceptable). Rate of acceleration: Must be capable of controlling rate of acceleration. Must be capable of a minimum acceleration rate of at least 0.5 degrees/second/second in all axes of motion (lower rate is acceptable). Maximum acceleration rate should be at least 50 degrees/second/second (higher rate is acceptable). Rotation Speed Collection: System must automatically display and collect rotation speed data at a rate of at least 1 Hz. Rotation speed data must be capable of being stored electronically. Other data capabilities: System must allow for human subject to be wired to collect subject physiological data while moving. Please respond if your company is able to provide this type of equipment required. Contact the contract specialist at sandra.lynch-maldonado@usafa.af.mil for any questions.
- Place of Performance
- Address: 8110 Industrial Dr Ste, USAFA, CO
- Zip Code: 80840
- Country: UNITED STATES
- Zip Code: 80840
- Record
- SN01149534-W 20060922/060920220854 (fbodaily.com)
- Source
-
FedBizOpps Link to This Notice
(may not be valid after Archive Date)
| FSG Index | This Issue's Index | Today's FBO Daily Index Page |