Loren Data's SAM Daily™

FBO DAILY ISSUE OF OCTOBER 06, 2006 FBO #1775
SOLICITATION NOTICE

16 -- D-Level Tools/PSE for H-1 Aircraft

Notice Date

10/4/2006
 

Notice Type

Solicitation Notice
 

NAICS

336413 — Other Aircraft Parts and Auxiliary Equipment Manufacturing
 

Contracting Office

Department of the Navy, Naval Air Systems Command, Naval Air Warfare Center Aircraft Division Lakehurst, Contracts Department Hwy. 547 Attn:B562-3C, Lakehurst, NJ, 08733-5083
 

ZIP Code

08733-5083
 

Solicitation Number

N68335-06-R-0010-03
 

Response Due

10/19/2006
 

Archive Date

11/2/2006
 

Description

The Naval Air Warfare Center Aircraft Division Lakehurst, NJ (NAWCADLKE) intends to enter into sole source negotiations with Bell Helicopter Textron, Inc, Hurst, TX to procure Peculiar Support Equipment for use at the Depot Level of maintenance for the H-1 program under Basic Ordering Agreement N68335-06-G-0010. This procurement is for the following PSE: Tool, Backlash Check, P/N 449-240-030-101; Tool, Backlash Check, Hyd Pump Gear, P/N 449-240-031-101; Tool, Backlash Check, Rotor Brake Quill, P/N 449-240-032-101; Tool, Bearing Remove/Install MDGB, P/N 449-240-033-101; Tool, Bearing Remove/Install MRGB, P/N 449-240-034-101; Tool, Backlash Lockout, MRGB, P/N 449-240-035-101; Tool, Backlash Lockout, MRGB, P/N 449-240-036-101; Tool, Main Planetary Alignment, MRGB, P/N 449-240-037-101; Tool, Upper Planetary Alignment, MRGB, P/N 449-240-038-101; Tool, Upper Planetary Gear Removal, P/N 449-240-039-101; Stand, Build-up, MRGB, Clean Room, P/N 449-240-040-101; Tool, Backlash Check, TRDMGB, P/N 449-240-041-101; Tool, Bearing Support Tail Rotor GB, P/N 449-240-042-101; Tool, Duplex Bearing Support, Removal, P/N 449-240-043-101; Tool, Bearing Remove/Install, P/N 449-240-044-101; Tool, Restrain, P/N 449-240-045-101; Socket, Spline Nut Bevel Gear, P/N 449-245-006-101; Socket, Spline Nut TRGB Pinion, P/N 449-240-049-101; Holding Fixture, TRGB, P/N 449-240-050-101; Socket, Spline Nut TRGB Drive Pinion, P/N 449-240-051-101; Tool, Install, Wear Sleeve, TRDGB, P/N 449-240-052-101; Torque Adapter, Spline Nut, P/N 449-240-063-101; Stand, Maintenance, Mast Assembly, MRGB, P/N 449-240-069-101; Tool, Bearing Install, MRGB, P/N 449-240-070-101; Socket, Spanner, MRGB, P/N 449-240-072-101; Tool, Installation, Wear Sleeve, MRGB, P/N 449-240-074-101; Reactor, Torque MRGB ACC Drive, P/N 449-240-075-101; Reactor, Torque, MRGB, P/N 449-240-076-101; Tool, Bearing Support, MRGB, P/N 449-240-077-101; Tool, Bearing Support, MRGB, P/N 449-240-078-101; Tool, Bearing Remove/Install TR Angle DR, P/N 449-240-080-101; Tool, Bearing Remove/Install, TRDMGB, P/N 449-240-130-101; Tool, Bearing Backup Tail Rotor Drive, P/N 449-240-082-101; Tool, Seal Remove/Install Tail Rotor Drive, P/N 449-240-083-101; Adapter, Speed Gap, TRDGB, P/N 449-240-131-101; Tool, Gear Removal, TRDMGB, P/N 449-240-132-101; Tool, Holding,Tail Rotor Angle Drive, P/N 449-240-087-101; Tool, Shaft Align Lower Planetary Assy, P/N 449-240-107-101; Tool, Lower Planetary Gear Alignment, P/N 449-240-111-101; Tool, , Lower Planetary Support, MRGB, P/N 449-240-112-101; Tool, Restraint, Lower Planetary Assy, P/N 449-240-113-101; Guide, Planetary, Shaft, High Speed, P/N 449-240-114-101; Tool, Upper Planetary Gear Alignment, P/N 449-240-115-101; Tool, Upper Planetary Support, MRGB, P/N 449-240-116-101; Tool, Planetary Lift Adapter, MRGB, P/N 449-240-118-101; Test Stand, Main Rotor Gearbox, P/N 449-240-120-101; Maintenance Stand, Main Rotor Gearbox, P/N 449-240-121-101; Socket, Spline Nut, TRGB, P/N 449-240-139-101; Test Stand, Tail Rotor Gearbox, P/N 449-240-145-101; Tool, Bearing Backup, MRGB, P/N 449-240-055-101; Tool, Bearing Installation, Mast Assy GB, P/N 449-240-065-101; Tool, Install, Wear Sleeve MGBD, P/N 449-240-053-101; Tool, Backlash Lockout, TRDMGB, P/N 449-240-047-101; Tool, Backlash Check, TRGB, P/N 449-240-158-101; Tool, Gear Install, TRGB, P/N 449-240-156-101; Tool, Backlash, Lockout,TRGB, P/N 449-240-159-101; Tool, Instl, Wear Slv Bushing, Mast, MRGB, P/N 449-240-067-101; Tool, Bearing Removal, Mast Assembly, P/N 449-240-066-101; Tool, Bearing Support, MDGB, P/N 449-240-105-101; Tool, Bearing Removal/Install, MGB, P/N 449-240-060-101; Tool, Mast Install, MGB, P/N 449-240-064-101; Tool, Bearing Backup MRGB, P/N 449-240-059-101; Tool, Bearing Removal, MRGB, P/N 449-240-062-101; Adapter, Lifting MDGB Housing, P/N 449-240-160-101; Tool, Mast Locking, MRGB, P/N 449-240-163-101; Standard, Speed Gap Calibration, P/N 449-240-161-101; Tool, Bearing Removal, MGB, P/N 449-240-099-101; Tool, Inspection Check Fixture, MDGB, P/N 449-240-106-101; Tool, Bearing Support, Mast, TRGB, P/N 449-240-138-101; Tool, Install, Wear Sleeve, TRGB, P/N 449-240-143-101; Tool, Mast Restrain, TRGB, P/N 449-240-141-101; Tool, Restrain, Mast, TRGB, P/N 449-240-137-101; Tool, Bearing Support, Mast, TRGB, P/N 449-240-142-101; Tool, Install, Wear Sleeve, TRGB, P/N 449-240-144-101; Tool, Seal Removal, TRGB, P/N 449-240-140-101; Tool, Restrain, MGB, P/N 449-240-096-101; Socket, Spline Nut, MGB, P/N 449- 240-097-101; Cart, Flushing, MRGB, P/N 449-240-124-101; Socket, Spline Nut TRGB, P/N 449-240-134-101; Tool, Bearing Install MGB, P/N 449-240-098-101; Fxtr, Holding, Rotating Ring, Swashplate, P/N 449-240-071-101; Fxtr, Hldg, Non-Rotating Ring, Swashplate, P/N 449-240-073-101; Fxtr, Boring, Rotating Ring, Swashplate P/N 449-240-088-101; Tool, Removal, Gear, TRGB, P/N 449-240-094-101; Tool, Press, Mast Assembly, TRGB, P/N 449-240-089-101; Fixture, Holding, Housing,TRGB, P/N 449-240-093-101; Tool, Seal Install SCAS, P/N T556-12; Tool, Installation, Check Valve, P/N 87001639ASAD; Tool Set, SCAS Null Adjustment, P/N 87001995; Tool, Alignment, Angle Indicator, P/N 42675-T11160; Tool, Packing Installation, P/N T556-108; Tool, Restrain, Angle Drive Unit, TRGB, P/N 449-240-136-101; Tool, Bearing Puller, TRGB, P/N 449-240-135-101; Fixture, Holding, Anti-Flail, MDS, P/N U10467; Tool, Bearing Install, P/N 449-240-146-101; Socket, Spline Nut, P/N 449-240-151-101; Fixture, Holding, TRGB, P/N 449-240-152-101; Tool, Plug Removal, P/N 449-240-155-101; Tool, Plig Install, P/N 449-240-154-101; Tool, Bearing Install, P/N 449-240-149-101; Tool, Bearing Install, TRG, P/N 449-240-147-101; Tool, Bearing Install, P/N 449-240-054-101; Tool, Bearing Remove/ Install, TRGB, P/N 449-240-153-101. The proposed acquisition is for PSE and technical data for which the Government does not own specifications or drawings, and which are proprietary to Bell Helicopter. NAWCADLKE intends to procure these items under the authority of 10 USC 2304 (C) (1), as implemented in FAR 6.302-1. All responsible sources are encouraged to submit a proposal, which may be used by the Government in determining whether or not to conduct a competitive procurement. A determination by the Government not to open the requirement to competition based upon the responses to this notice is solely within the discretion of the Government. See note 22.
 

Place of Performance

Address: Hurst, TX

Zip Code: 76053-8030

Country: UNITED STATES
 

Record

SN01161326-W 20061006/061004220836 (fbodaily.com)
 

Source

FedBizOpps Link to This Notice
(may not be valid after Archive Date)

---

| FSG Index  |  This Issue's Index  |  Today's FBO Daily Index Page |