MODIFICATION
23 -- FY07 PROCUREMENT OF VEHICLES
- Notice Date
- 10/5/2006
- Notice Type
- Modification
- NAICS
- 336111
— Automobile Manufacturing
- Contracting Office
- Department of the Navy, Naval Facilities Engineering Command, NAVFAC Pacific, OICC Sasebo, Sasebo Naval Base, Building 320 Hirase-cho, Sasebo, AP, 857-0056
- ZIP Code
- 00000
- Solicitation Number
- N40084-07-T-6000
- Response Due
- 11/3/2006
- Archive Date
- 11/18/2006
- Point of Contact
- Hirokazu Toyofuku, Contract Specialist, Phone 252-2395, Fax 252-3769, - Masayo Sonoda, Purchasing & Contract Specialist, Phone 01181956502394, Fax null,
- E-Mail Address
-
hirokazu.toyofuku@sasebo.navy.mil, masayo.sonoda@sasebo.navy.mil
- Description
- The purpose of this amendment is to provide additional Contract Line Items as follows: 5. A. CLIN 0005: Truck, panel, miniature size, 4x2, 5 door, 4 passengers, 350kg loading capacity, windows all sides, right hand drive, gasoline engine driven, automatic transmission, air conditioning. (1) ECC: 0329 MJ, (2) Quantity: 1 each. However, the Government reserves the right to order additional quantities between 1 to 6. Note: Vehicle/Equipment and furnished accessories shall comply with Japanese Motor Vehicle Safety Standard in effect on the date of manufacture. The Government reserves the right to accept alternate specifications as noted below. B. DIMENSION and CAPACITY: Overall Length: 3,380mm (133.0in) minimum, Overall Width: 1,450mm (57.0in) minimum, Overall Height: 1,850mm (72.8in) minimum, Loading capacity:350kg (771lb) minimum ---- 2 passengers, 250kg ( 551lb ) minimum ---- 4 passengers. C. REQUIREMENTS: (1) Exterior Color: Manufacturer?s standard gloss White. (2) Engine: Gasoline engine, minimum 45PS. (3) Transmission System: Automatic transmission. (4) Suspension: Manufacturer's standard. (5) Tire: Manufacturer's standard. (6) Electrical System: Manufacturer's standard.(7) Air Conditioning: Manufacturer's standard. (8) Radio: Manufacturer's standard. (9) Heater: Manufacturer's standard. (10) Seat Belt: Shall be installed on driver's seat and all passenger seats. (11) Air Bag: Shall be installed for driver's seat and front passenger seat. (12) Window: Windows all sides. (13) Steering: Power steering. (14) Speedometer/Odometer: Manufacturer's standard (in kilometer). (15) Back Buzzer: Shall be installed on rear side. (16) Floor Mats. (17) Triangle Reflectors: One (1). (18) Tire chain: One (1) set. (19) Warranty: Manufacturer's standard. The warranty work will be provided by dealers around Sasebo area, Japan. (20) Technical Publications: One (1) certificate of transfer for each vehicle, one (1) sets of operator manual(Japanese) for each vehicle, one (1) set of Technical (shop repair) manuals and part catalog(Japanese) for each vehicle, to be furnished by Contractor at time of vehicle delivery. (21) Accessories: Shall be the type installed on manufacturer's standard domestic production model. D. INTENDED USE: The vehicles covered by this specification are intended for general administrative use by the U. S. Government in transporting personnel/cargo. The vehicles furnished hereunder shall be delivered ready for immediate use. E. SAFETY: Each vehicle shall comply with Japanese domestic safety and exhaust emission control requirements. F. DELIVERY POINT: All transportation charges borne by the contractor to the Transportation Officer, NAVFAC FE, Transportation, Sasebo Detachment, Bldg.203, Mr. Morisawa, Tel 0956-50-3534. G. DELIVERY DATE: The vehicle shall be delivered at the delivery point specified above within 60 calendar days after date of contract award. 6. A. CLIN 0006: Truck, tractor, 4x2, 2 door, 2 or 3 passengers, diesel engine driven, loading capacity of fifth wheel 9,000kg, manual transmission, air conditioning, right hand drive, low roof. (1) ECC: 0614 0J. (2) Quantity: 1 each. However, the Government reserves the right to order additional quantity 1. Note: Vehicle/Equipment and furnished accessories shall comply with Japanese Motor Vehicle Safety Standard in effect on the date of manufacture. The Government reserves the right to accept alternate specifications as noted below. B. DIMENSION and CAPACITY: Overall Height: 2,920mm (115.0in) maximum, Wheel Base: 3,150mm (124.0in) minimum, Loading Capacity of Fifth Wheel: 9,000 kg (19,845lb) minimum, C. REQUIREMENTS: (1) Exterior Color: Manufacturer?s standard. (2) Engine: Diesel engine, minimum 400PS. (3) Transmission System: Manual transmission. (4) Suspension: Air suspension at rear axis. (5) Coupler Height Control System: Manufacturer?s standard. (6) Fuel Tank Capacity: Minimum 400 liter, including sub fuel tank. (7) Tire: Manufacturer's standard. (8) Electrical System: Manufacturer's standard. (9) Air Conditioning: Manufacturer's standard. (10) Radio: Manufacturer's standard. (11) Heater: Manufacturer's standard. (12) Seat Belt: Shall be installed on driver's seat and all passenger seats. (13) Air Bag: Shall be installed for driver's seat. (14) Steering: Power steering. (15) Speedometer/Odometer: Manufacturer's standard (in kilometer). (16) Side Marker Lamp and Tire Lamp: Manufacturer's standard. (17) Working Light: Manufacturer's standard. (18) Tool Box: Made by stainless steel. (19) Towing Hitch Installation: Towing hitch shall be installed on rear portion by the manufacturer. The U. S. Government shall provide towing hitch. (20) Floor Mats: Manufacturer's standard. (21) Triangle Reflector: One (1). (22) Tire Chain: One (1) set. (23) Warranty: Manufacturer's standard. The warranty work will be provided by dealers around Sasebo area, Japan. (24) Technical Publications: One (1) certificate of transfer for each vehicle, one (1) sets of operator manual(Japanese) for each vehicle, one (1) set of Technical (shop repair) manuals and part catalog(Japanese) for each vehicle, to be furnished by Contractor at time of vehicle delivery. (25) Accessories: Shall be the type installed on manufacturer's standard domestic production model. D. INTENDED USE: The vehicles covered by this specification are intended for general administrative use by the U. S. Government in transporting personnel/cargo. The vehicles furnished hereunder shall be delivered ready for immediate use. E. SAFETY: Each vehicle shall comply with Japanese domestic safety and exhaust emission control requirements. F. DELIVERY POINT: All transportation charges borne by the contractor to the Transportation Officer, NAVFAC FE, Transportation, Sasebo Detachment, Bldg.203, Mr. Morisawa, Tel 0956-50-3534. G. DELIVERY DATE: The vehicle shall be delivered at the delivery point specified above within 120 calendar days after date of contract award. 7. A. CLIN 0007: Semi-trailer, loading capacity 19,500kg, overall flat bed, 2 axles, dual wheels, air suspension, air service brakes, parking brake, side gate, and front guard frame. (1) ECC: 0816-00 (2) Quantity: 1 each. Note: Vehicle/Equipment and furnished accessories shall comply with Japanese Motor Vehicle Safety Standard in effect on the date of manufacture. The Government reserves the right to accept alternate specifications as noted below. B. DIMENSION and CAPACITY: Overall Length 12,800mm (503.9in) minimum, Overall Width 2,480mm (97.6in) minimum, Cargo Bed Height 1,300mm (51.2in) maximum, Loading Capacity 19,500kg (42,997lb) minimum, Side Gate Height 700 - 750mm (27.5 ? 29.6in). C. REQUIREMENTS: (1) Exterior Color: Manufacturer?s standard silver. (2) Tire: 8ea (= 2 axes x 4 tires) and 1 spare tire. (3) Suspension: Air suspension. (4) Front Guard Frame: Steel frame, with wooden pad, with ladder and working light on each side. (5) Cargo Bed Material: Wood. (6) Electrical System: DC 24 volt type. (7) Side Bumper: Manufacturer's standard. (8) Concealable Hook: 1-ton type. Approximately 300mm pitch on each side of cargo bed. (9) Twistable Hook: 3-ton type. Ring thickness is 20mm maximum. Approximately 1,000mm pitch on each side of cargo bed. (10) Concealable Twist Lock for Container: 1 set for 20 feet container. (11) Side Hook: 1-ton type. Approximately 300mm pitch on each side of body. (12) Side Marker Lamp and Tire Lamp: Manufacturer's standard. (13) Turn Signal Lamp and Back Lamp: Manufacturer's standard. (14) Back Buzzer: Manufacturer's standard. (15) Back Eye Camera (color) with Liquid Crystal Monitor (color): Manufacturer's standard. (16) Mesh Box: Manufacturer's standard. (17) Tool Box: 4ea. Made by stainless steel. (18) Vehicle License Plate Holder: Front side and Rear side, manufacturer's standard. (19) Accessories: Shall be the type installed on manufacturer's standard domestic production model. (20) Warranty: Manufacturer's standard. The warranty work will be provided by dealers around Sasebo area, Japan. (21) Technical Publications: One (1) certificate of transfer for each vehicle, one (1) set of operator manual(Japanese) for each vehicle, one (1) set of Technical (shop repair) manuals and part catalog(Japanese), to be furnished by Contractor at time of vehicle delivery. D. INTENDED USE: The vehicles covered by this specification are intended for general administrative use by the U. S. Government in transporting cargo. The vehicles furnished hereunder shall be delivered ready for immediate use. E. SAFETY: Each vehicle shall comply with Japanese domestic safety control requirements. F. DELIVERY POINT: All transportation charges borne by the contractor to the Transportation Officer, NAVFAC FE, Transportation Department, Sasebo Detachment, Japan, Bldg.203, Mr. Morisawa, Tel 0956-50-3534. G. DELIVERY DATE: The vehicle shall be delivered at the delivery point specified above within 120 calendar days after date of contract award.
- Place of Performance
- Address: Naval Facility Engineering Command, Far East, Resident Officer in Charga of Construction, Sasebo, PSD 476 BOX 66, FPO AP 96322-0066
- Zip Code: 96322-0066
- Country: JAPAN
- Zip Code: 96322-0066
- Record
- SN01162200-W 20061007/061005220816 (fbodaily.com)
- Source
-
FedBizOpps Link to This Notice
(may not be valid after Archive Date)
| FSG Index | This Issue's Index | Today's FBO Daily Index Page |