SOURCES SOUGHT
93 -- Intaglio Ink Developmental Effort
- Notice Date
- 10/20/2006
- Notice Type
- Sources Sought
- NAICS
- 325910
— Printing Ink Manufacturing
- Contracting Office
- Department of the Treasury, Bureau of Engraving and Printing (BEP), Office of Procurement, 14th & C Streets, S.W., Washington, DC, 20228, UNITED STATES
- ZIP Code
- 00000
- Solicitation Number
- Reference-Number-SSR-07-001MIT
- Response Due
- 11/1/2006
- Archive Date
- 11/16/2006
- Description
- The Bureau has acquired new Super Orlof Intaglio printing presses from KBA Giori. The Super Orlof printing press uses both an indirect and direct inking process for applying ink to the printing plates. The indirect inking process is similar to the dry offset inking process. The BEP will use the indirect inking process of the press. Therefore, the Bureau is conducting a developmental effort with interested intaglio ink suppliers to develop a formulation for both the green and black inks that will optimize the Bureaus print quality and press performance of the Super Orlof Intaglio printing press. For initial screening purposes, interested parties are requested to submit a 5 pound retain sample of a green intaglio ink and a black intaglio ink with MSDSs for laboratory testing and review. The VOCs for the inks shall be 12.0 percent or less. If the retain sample is approved, then the interested ink supplier will be requested to submit approximately 50 pounds for the initial press trial. Additional quantities of up to 500 pounds of the ink may be requested for a scale up press trial. Ink suppliers may be present during press trials; however, press trials must be scheduled based on the Governments needs and schedules. Attached is a copy of the current intaglio ink performance specification for the I-10 Intaglio presses. Interested ink suppliers should use this specification as a general guide for developing intaglio inks for the Super Orlof press. The Bureau has an immediate need to identify production green and black intaglio inks for the Super Orlof printing press and as such this announcement will be open until such time as the inks are proven for BEP production use. Based on this developmental effort and identified ink suppliers capable of producing the inks that meet the Bureaus requirements, a limited competition or a sole source acquisition may result. Information shall be submitted to Bureau of Engraving & Printing, Office of Acquisition, Attn: Jennifer Sellers, Contracting Officer, Manager, Materials and IT Contracts Division, Office of Acquisition, 14th and C Streets, SW, Washington, DC 20228. If you have any questions, please contact Joan Smoot, Contract Specialist on (202) 874-3236, email at joan.smoot@bep.treas.gov or Jennifer Sellers, Contracting Officer on (202) 874-3148, e-mail at jennifer.sellers@bep.treas.gov.
- Place of Performance
- Address: Washington, DC
- Zip Code: 20228
- Country: UNITED STATES
- Zip Code: 20228
- Record
- SN01168900-W 20061022/061020220838 (fbodaily.com)
- Source
-
FedBizOpps Link to This Notice
(may not be valid after Archive Date)
| FSG Index | This Issue's Index | Today's FBO Daily Index Page |