MODIFICATION
53 -- CLAMP LOOP
- Notice Date
- 11/1/2006
- Notice Type
- Modification
- NAICS
- 336412
— Aircraft Engine and Engine Parts Manufacturing
- Contracting Office
- Department of the Air Force, Air Force Materiel Command, Tinker OC-ALC - (Central Contracting), 3001 Staff Drive, Ste 1AG76A, Tinker AFB, OK, 73145-3015, UNITED STATES
- ZIP Code
- 00000
- Solicitation Number
- FA8104-07-R-0032
- Response Due
- 12/1/2006
- Archive Date
- 12/16/2006
- Point of Contact
- Mark Green, Contract Negotiator, Phone 405-734-8768, Fax 405-734-8776, - Margaret Wright, Contracting Officer, Phone (405)734-8758, Fax (405)734-8776,
- E-Mail Address
-
mark.green@tinker.af.mil, margaret.wright@tinker.af.mil
- Description
- 53 - Supply of F100/229 CLAMP LOOP: One year Firm Fixed Price contract is contemplated Mark Green, Phone 405-734-8768, Fax 405-734-8776, Email mark.green@tinker.af.mil - Margaret A Wright, Phone 405-734-8758, Fax 000-000-0000, Email margaret.wright@tinker.af.mil PR Number(s): 5340013405205NZ, FA810407R0032, FD20300780632 Item: 0001 NSN: 5340013405205NZ CLAMP,LOOP P/N: ST1540-04, Description: OVERALL WIDTH 0.500 IN NOMINAL WITH MATERIAL THICKNESS 0.031 INCHES NOMINAL. DISTANCE FROM LOOP CENTER TO TONGUE END 0.723 IN MINIMUM AND 0.783 IN MAXIMUM, LOOP INSIDE DIAMETER 0.250 IN NOMINQL. CLAMP USED TO SECURE TUBES, HOSES AND HARNESES. MATERIAL: STEEL COMP 321 BAND RUBBER SILICONE CLASS Q CUSION - MDCL-ASM5510 ASSN STD SINGLE MATERIAL RESONSE BAND PWA36450 MFR. Total Line Item Qty: 0.0000 Quanity Range (a) from: 423080 to 84,614 Quanity Range (b) from: 84,615 to 126,924 Destn: FB2039,Tinker AFB,OK.,73145-9013. Delivery: on or before: 29JUN2007, Delivery schedule: 10,162 each per month until all assets are shipped complete or best delivery possible. PR Number(s): 5340013287738NZ, FA810407R0032, FD20300780609 Item: 0002 NSN: 5340013287738NZ CLAMP,LOOP P/N: ST1540-10, Description: Approximately 1 inch diameter. Overall width material 0.0500. Item serves as a cushioned tube clamp to secure tubes, hoses, and harnesses. Material: Silicone Rubber AMS5510 SST with PWA36450. Total Line Item Qty: 0.0000 Quanity Range (a) from: 6,555 to 13,109 Quanity Range (b) from: 13,110 to 19,665 Destn: FB2039,Tinker AFB,OK.,73145-9013. Delivery: on or before 31MAY2007, .00 Delivery schedule: 1,422 each per month until all assets are shipped complete or best delivery possible. PR Number(s): 5340013405203NZ, FA810407R0032, FD20300780574 Item: 0003 NSN: 5340013405203NZ CLAMP,LOOP P/N: ST1540-06, Description: Overall width 0.500 inches nominal. Material thickness 0.031 inches nominal. Center to center distance 0.563 inches minimum and between loop and mounting hole 0.623 inches maximum, Distance from loop center 0.786 inches min. and to tongue end 0.846 inches max. Loop inside diameter 0.375 inches nominal. Tongue hole type is round unthreaded. Diameter is 0.204 nominal. Item is used to secure tubes, hoses and harness. Material: Steel comp 321 band rubber silicone class Q cushion. Total Line Item Qty: 0.0000 EA Quanity Range (a) from: 13,414 to 26,826 Quanity Range (b) from: 26,827 to 40,241 Destn: FB2039,Tinker AFB,OK.,73145-9013. Delivery: on or before 31MAY2007, Delivery Schedule: 6,023 each per month until all assets are shipped complete or best delivery possible. PR Number(s): 5340013287739NZ, FA810407R0032, FD20300780631 Item: 0004 NSN: 5340013287739NZ CLAMP,LOOP P/N: ST1540-08, Description: Overall width is 0.500 with material thickness of 0.0060. Center to center distance between loop and mounting hole is 0.500-0.560. Loop inside diameter is 0.188 and tongue hole of 0.209. Item is used to secure tubes, hoses and harnesses. Material: Silicone rubber AMS5510, PWA36450. Total Line Item Qty: 0.0000 EA Quanity Range (a) from: 25,123 to 50,244 Quanity Range (b) from: 50,245 to 75,368 Destn: FB2039,Tinker AFB,OK.,73145-9013. Delivery: 30MAR2007, .00 EA PR Number(s): 5340013405199NZ, FA810407R0032, FD20300780658 Item: 0005 NSN: 5340013405199NZ CLAMP,LOOP P/N: ST1540-14, Description: 1.5 INCH DIAMETER X 1.0 INCH THICK. ITEM HOLDS VARIOUS TUBES TO ENGINE DUCT OR CORE CASE. MATERIAL: STAINLESS STEEL AND FLUOROSILICON RUBBER. Total Line Item Qty: 0.0000 Quanity Range (a) from: 688 to 1,375 Quanity Range (b) from: 1,376 to 2,064 Destn: FB2039,Tinker AFB,OK.,73145-9013. Delivery: on or before 29JUN2007, Delivery Schedule: 703 each per month until all assets are shipped complete or best delivery possible. Applicable to: F100/220/229 Engine FIRST ARTICLE TEST REQUIRED Destination: Tinker Air Force Base OK 73145-5900. For additional information contact Mark Green /448 CBSG/PKA (405) 734-8768, mark.green@tinker.af.mil. The solicitation FA8104-07-R- 0032 issue date is approximately 31 OCTOBER 2006. Proposal response date is 01 DECEMBER 2006. Electronic procedures will be used for this solicitation through FedBizOpps at http://www.eps.gov/. Approved Sources are: UMPCO, Inc(Cage Code 18076), United Technologies Corp, (Cage Code 52661), and T A mfg Company (Cage Code 84971). Release of data to a foreign owned, controlled or influenced company is dependent on the approval of the foreign disclosure office. Technical Data Package is available on the FedTeds web site: https://www.fedteds.gov. Qualification Requirements: To be eligible for contract award, offerors must be approved sources. The Government is not required to delay contract award to review pending SARS. Therefore, offerors are encouraged to submit SARS as soon as possible if the Government has not completed review of a SAR when the contract is awarded, the SAR will be retained and the source will be reviewed for possible source approval for future awards. These qualification requirements apply to all line Item Numbers. Please contact: OC-ALC/BC, ATTN: Source Development Office, 3001 Staff Dr Ste 1AG85A, Tinker AFB OK 73145-3009 in writing for further information concerning the source approval process. All proposals received within forty five-days after date of publication of this synopsis will be considered by the Government. Award will be made only if the offeror, the product/service, or the manufacturer meets qualification requirements at the time of award in accordance with FAR clause 52.209-1. It is suggested that small business firms or others interested in subcontracting opportunities in connection with the described procurement make contact with the firm(s) listed. Note: An Ombudsman has been appointed to hear concerns from offerors or potential Offerors during the proposal development phase of this acquisition. The purpose of the Ombudsman is not to diminish the authority of the program director or contracting officer, but to communicate contractor concerns, issues, disagreements, and recommendations to the appropriate government personnel. When requested, the Ombudsman will maintain strict confidentiality as to source of the concern. The Ombudsman does not participate in the evaluation of proposals or in the source selection process. Interested parties are invited to call the Ombudsman at (405) 736-3273. DO NOT CALL THIS NUMBER FOR SOLICITATION REQUESTS. Note: Faxed solicitation requests can be submitted to 448 PSG/PKA, Tinker AFB OK 73145-3015, FAX NUMBER (405)734-8776. See Note (s) 22, 23 and 26.
- Record
- SN01174347-W 20061103/061101220444 (fbodaily.com)
- Source
-
FedBizOpps Link to This Notice
(may not be valid after Archive Date)
| FSG Index | This Issue's Index | Today's FBO Daily Index Page |