MODIFICATION
99 -- Shrink Wrap Film For Cash-Paks
- Notice Date
- 11/1/2006
- Notice Type
- Modification
- NAICS
- 326112
— Plastics Packaging Film and Sheet (including Laminated) Manufacturing
- Contracting Office
- Department of the Treasury, Bureau of Engraving and Printing (BEP), Office of Procurement, 14th & C Streets, S.W., Washington, DC, 20228, UNITED STATES
- ZIP Code
- 00000
- Solicitation Number
- BEP-07-SS001
- Response Due
- 11/30/2006
- Archive Date
- 7/15/2007
- Description
- The Bureau of Engraving & Printing (BEP) is seeking a tamper evident flexible film that shall meet the performance requirements of the BEPs Specification F: SW-5 dated March 19, 2003 (Included as Attachment) for packaging cash-paks of currency notes with the following additional two requirements: For Section 3.3.8 (Tamper Evidence), in addition to the stated text, the film shall show highly visible evidence when punctured, breached or otherwise tampered with. For Section 3.4.4 ("Thickness"), the film shall be significantly thinner (0.002-0.005 inches ideally) than the current film in use ( 0.010 inches) with no loss of specified performance properties or end-use functionality, particularly with no loss in strength properties, and without varying + 10% from the offerors declaration of manufacturing thickness. A sample of our current production film is available upon request,however, our current film does not meet the new performance requirements as stated above.. Interested parties who want to participate in this effort shall submit a technical description and technical data sheet of their film along with a sample for BEP review. The BEP will work with the vendor in a collaborative effort to determine if the film meets the BEPs requirements through practical trials of the film on BEP equipment as warranted. The technical description and sample (approximately 3 square feet) should be sent to the Bureau of Engraving and Printing, Attn: Office of Materials Technology, Dr. John F. Bobalek, Room 201-29A, 14th & C Sts., S.W., Washington, D.C. 20228. The technical data sheet should contain at minimum the following properties of the film: Impact Resistance ASTM D 1709, Tensile Strength ASTM D 638, Elongation ASTM D 638, Tear Propagation ASTM D 1922, Abrasion ASTM D 4157, Seal Initiation and Strength ASTM F 88, Hot Tack ASTM F 1921-98, and Shrinkability (in both the machine and transverse directions). If you have any questions, please contact Merwin Charles via fax at (202) 874-3135 or e-mail at merwin.charles@bep.treas.gov. Telephone inquiries are strongly discouraged. Interested parties are encouraged to register at FedBizOpps (www.fedbizopps.gov ) for electronic notification of issuance of any amendments or changes to this notice.
- Place of Performance
- Address: 14th and C streets NW, Washington, DC
- Zip Code: 20250
- Country: UNITED STATES
- Zip Code: 20250
- Record
- SN01174603-W 20061103/061101220932 (fbodaily.com)
- Source
-
FedBizOpps Link to This Notice
(may not be valid after Archive Date)
| FSG Index | This Issue's Index | Today's FBO Daily Index Page |