MODIFICATION
83 -- SEW MESH COVER SETS
- Notice Date
- 12/8/2006
- Notice Type
- Modification
- NAICS
- 451130
— Sewing, Needlework, and Piece Goods Stores
- Contracting Office
- Department of Homeland Security, United States Coast Guard (USCG), Commandant (G-ACS), U.S. Coast Guard Headquarters, 2100 Second St., SW, Washington, DC, 20593-0001, UNITED STATES
- ZIP Code
- 20593-0001
- Solicitation Number
- Reference-Number-HSCG23-07-Q-COVERS
- Response Due
- 12/18/2006
- Archive Date
- 12/19/2006
- Point of Contact
- Dianne Palmatier, Contracting Officer, Phone (360)769-2417, Fax (360)769-9291,
- E-Mail Address
-
dianne.l.palmatier@uscg.mil
- Small Business Set-Aside
- Total Small Business
- Description
- Item descriptions 1 and 2 are amended to include the following requirements: MESH MATERIAL SHALL BE POROUS WITH A THREAD COUNT BETWEEN (9-13) X (12-16) PER SQUARE INCH, WEIGHT SHALL BE BETWEEN 6-12 OUNCES PER SQUARE YARD. AREA BETWEEN STRANDS SHALL BE 40 PERCENT OR GREATER. SNAPS AND STUDS ARE TO BE SIZE 5/8 INCH OR EQUAL METRIC SIZE STAINLESS STEEL. THE RB-HS AND RB-S DRAWINGS HAVE BEEN CHANGED FROM 3/8 INCH SNAP STAINLESS STEEL CAP/SOCKET TO READ 5/8 INCH SNAP STAINLESS STEEL CAP/SOCKET. NO OTHER CHANGES HAVE BEEN MADE TO THE DRAWINGS. TO RECEIVE UPDATED COPIES OF THE RB-HS AND RB-S DRAWINGS REFLECTING THIS WORDING CHANGE, PLEASE EMAIL DIANNE.L.PALMATIER@USCG.MIL OR CALL 360-769-2417 X31. REVISED ITEM DESCRIPTION 1: RB-HS SET OF 3 COVERS (REFERENCE RB-HS DRAWING FOR SIZES) 105 SETS, MESH COVERS, COLOR LIGHT GRAY, MARINE QUALITY POLYESTER OR VINYL MESH WITH FLAME RETARDANT AND UV INHIBITORS, A MINIMUM 8 OZ PER SQUARE YARD POLYESTER MESH, MESH MATERIAL SHALL BE POROUS WITH A THREAD COUNT BETWEEN (9-13) X (12-16) PER SQUARE INCH, WEIGHT SHALL BE BETWEEN 6-12 OUNCES PER SQUARE YARD, AREA BETWEEN STRANDS SHALL BE 40 PERCENT OR GREATER., HALF INCH HEM WITH VINYL TEX BACKING. SNAPS AND STUDS ARE TO BE SIZE 5/8 INCH OR EQUAL METRIC SIZE STAINLESS STEEL, 14 EACH 5/8 INCH STAINLESS STEEL BUTTON SOCKET SNAPS INSTALLED, 16 EACH 5/8 INCH # 8 - 3/8 INCH STAINLESS STEEL SCREW STUD FURNISHED WITH EACH SET; REVISED ITEM DESCRIPTION 2: RB-S SET OF 6 COVERS (REFERENCE RB-S DRAWING FOR SIZES) 400 SETS, MESH COVERS, COLOR LIGHT GRAY, MARINE QUALITY POLYESTER OR VINYL MESH WITH FLAME RETARDANT AND UV INHIBITORS, A MINIMUM 8 OZ PER SQUARE YARD POLYESTER MESH, MESH MATERIAL SHALL BE POROUS WITH A THREAD COUNT BETWEEN (9-13) X (12-16) PER SQUARE INCH, WEIGHT SHALL BE BETWEEN 6-12 OUNCES PER SQUARE YARD, AREA BETWEEN STRANDS SHALL BE 40 PERCENT OR GREATER, HALF INCH HEM WITH VINYL TEX BACKING. SNAPS AND STUDS ARE TO BE SIZE 5/8 INCH OR EQUAL METRIC SIZE STAINLESS STEEL, 24 EACH 5/8 INCH STAINLESS STEEL BUTTON SOCKET SNAPS INSTALLED, 28 EACH 5/8 INCH # 8 - 3/8 INCH STAINLESS STEEL SCREW STUD FURNISHED WITH EACH SET. The following answers are provided in response to questions: 1. Is the fabric solid or porous (i.e. must it be able to breathe), and is there a tensile strength requirement? Mesh material shall be porous. There is no specific requirement for tensile strength. Reference item description changes made in this Amendment. 2. The mesh material specified does not come in Gray. It comes in white so is white mesh going to be ok? White mesh is not an acceptable color. Light gray is the preferred color but any shade of gray is acceptable as long as all sets are made of the same shade of gray. 3. Would appreciate a clarification.... the yellow lines within each of the drawings, presume that represents the mesh? The openings to be covered are shown in yellow on the drawing for Coast Guard installation purposes only. 4. It is very difficult to find 3/8 inch Stainless Steel snaps and 3/8 inch studs. Most common are 5/8 inch. Should I base my quote on the 5/8 inch standard, or find the more expensive 3/8 inch? Snaps and studs are to be size 5/8 inch or equal metric size stainless steel. Reference item description changes made in this Amendment. 5. The fabric requirement, 8 oz per sq yard polyester mesh fails to define the opening of the mesh. The opening of the mesh is either based on the number of threads/strands per sq. inch, (20 x 20) or the amount of open area between the strands, typical 10% to 40% open. Answer: Area between strands shall be 40 percent or greater. Reference item description changes made in this Amendment. 6. We must clarify installation requirements. Your solicitation states, to be installed, please advise if this means the awarded contractor is to install these covers and if so, what is the location for installation? No, the contractor is not required to install these covers. The Coast Guard will install the covers. NOTE: THIS NOTICE WAS NOT POSTED TO FEDBIZOPPS ON THE DATE INDICATED IN THE NOTICE ITSELF (08-DEC-2006); HOWEVER, IT DID APPEAR IN THE FEDBIZOPPS FTP FEED ON THIS DATE. PLEASE CONTACT fbo.support@gsa.gov REGARDING THIS ISSUE.
- Web Link
-
Link to FedBizOpps document.
(http://www.fbo.gov/spg/DHS/USCG/GACS/Reference-Number-HSCG23-07-Q-COVERS/listing.html)
- Place of Performance
- Address: USCG Response Boat Small Project Resident Office, 4255 SE Mile Hill Dr, Port Orchard, WA
- Zip Code: 98366-3920
- Country: UNITED STATES
- Zip Code: 98366-3920
- Record
- SN01193867-F 20061210/061208224150 (fbodaily.com)
- Source
-
FedBizOpps Link to This Notice
(may not be valid after Archive Date)
| FSG Index | This Issue's Index | Today's FBO Daily Index Page |