SOURCES SOUGHT
J -- USCGC SHAMAL DD
- Notice Date
- 12/13/2006
- Notice Type
- Sources Sought
- NAICS
- 336611
— Ship Building and Repairing
- Contracting Office
- Department of Homeland Security, United States Coast Guard (USCG), Commanding Officer (vpl), USCG Maintenance and Logistics Command - Atlantic, 300 East Main Street Suite 600, Norfolk, VA, 23510-9102, UNITED STATES
- ZIP Code
- 00000
- Solicitation Number
- Reference-Number-SHAMALDD
- Response Due
- 12/28/2006
- Archive Date
- 12/28/2007
- Description
- The United States Coast Guard is considering whether or not to set aside an acquisition for HUBZone concerns, for Service-Disabled Veteran-Owned Small Business Concerns (SDVOSB) or for Small Business. The small business size standard is less than 1,000 employees. The NAICS Code is 336611. The acquisition is for DRYDOCK repairs to the USCGC SHAMAL (WPC-13), a 179 foot Cyclone Class Coastal Patrol Boat. The USCGC SHAMAL is homeported in Pascagoula, Mississippi. The performance period will be ninety (90) calendar days with a start date on or about 4 June 2007. The scope of the acquisition is for the overhauling, cleaning and repairing of various items aboard the USCGC SHAMAL (WPC-13). This work will include, but is not limited to: (1) WELDING REPAIRS: Crack Repair (Steel), (2) CLEAN AND INSPECT FUEL AND OIL TANKS (INCLUDES DISPOSAL), (3) CLEAN AND INSPECT SEWAGE AND GREY WATER COLLECTION AND HOLDING TANKS, (4) REMOVE, INSPECT, AND REINSTALL PROPELLER SHAFTS, (5) RENEW SHAFT BEARINGS, (6) REMOVE, INSPECT, AND REINSTALL PROPELLERS, (7) INSPECT MDE EXHAUST SYSTEM COMPONENTS, (8) CLEAN AND INSPECT MPDE JACKET WATER HEAT EXCHANGERS, (9) CLEAN AND INSPECT SHIP'S SERVICE DIESEL GENERATOR SETS, (10) OVERHAUL PUMP AND MOTOR ASSEMBLIES, (11) OVERHAUL AND RENEW VALVES, (12) OVERHAUL & RENEW DUPLEX SEA STRAINERS, (13) REMOVE, INSPECT, AND REINSTALL RUDDER ASSEMBLIES, (14) OVERHAUL STABILIZING FINS, (15) RENEW ANCHOR AND PRESERVE ANCHOR CHAIN, (16) COMBATANT CRAFT RETRIEVAL SYSTEM ? MAINTENANCE, (17) CLEAN SEWAGE AND GREY WATER PIPING SYSTEM, (18) PRESERVE CHAIN LOCKER, (19) PRESERVE AND DISINFECT POTABLE WATER TANKS, (20) PRESERVE BOAT WELL AND STERN DOOR INTERIOR SURFACES, (21) COATING SYSTEM VISUAL INSPECTION, (22) PRESERVATION OF UNDERWATER BODY APPENDAGES, (23) PAINTING OF DRAFT MARKS, (24) PRESERVE FREEBOARD, (25) INSPECT AND MAINTAIN CATHODIC PROTECTION SYSTEM, (26) ROUTINE DRYDOCKING, (27) PROVIDE TEMPORARY LOGISTICS, (28) RENEW ANCHOR WINDLASS SPRAY SHIELD, (29) SOUND POWERED PHONE SYSTEM MAINTENANCE & INSPECTION, (30) TANK LEVEL INDICATOR (TLI) MAINTENANCE, (31) RENEW FIREMAIN PIPE INSULATION IN ENGINE ROOM, (32) CLEAN SHIPBOARD VENTILATION SYSTEM, (33) OVERHAUL SHIPBOARD VENTILATION MOTORS, (34) CLEAN ENGINE ROOM EXHAUST UPTAKE SPACES, (35) INSTALL BOAT WELL BLUE ROPE LIGHTS, (36) OVERHAUL ALL 18 & 24 INCH MECHANICAL HATCHES, (37) PRESERVE EXTERIOR AMMUNITION BOXES, (38) RENEW BERTHING AREA RACKS, (39) RENEW 50 CAL GUN MOUNT FOUNDATION, (40) INSPECT REMOTE OPERATED VALVES OPERATING GEAR, (41) LUBE OIL SAMPLING VALVE MODIFICATION, (42) RELOCATE MAIN SWITCHBOARD FUSE HOLDER, (43) UPGRADE SONAR SYSTEM, (44) PORTABLE SHORE POWER BOX UPGRADE, (45) STEERING SYSTEM GREASE FITTING REPLACEMENT, (46) SSDG GOVERNOR SYSTEM POWER SOURCE ISOLATION, (47) PROPULSION TRANSMISSION LUBE OIL SAMPLING VALVE ASSEMBLY, (48) FUEL SYSTEM KNIFE EDGE STRAINER REPLACEMENT, (49) INSTALL MDE STARTER DISCONNECT SWITCH, (50) NSTALL LUBE OIL TESTING METERS, (51) RELOCATE #1 AIR HANDLER CONTROL, (52) INSTALL MDE SALTWATER PRESSURE MONITORING GAGES, (53) INSTALLATION A/C SYSTEM MONITORING GAGES, (54) FWD GENERATOR EXHAUST PIPING MODIFICATION, (55) REPLACE MAIN PROPULSION DIESEL ENGINE BATTERIES, (56) BATTERY ISOLATOR REPLACEMENT, (57) INSTALL AIR TEST FITTING, (58) INSTALL MECHANICAL SHAFT SEAL ASSEMBLIES. All welding and brazing shall be accomplished by trained welders who have been certified by the applicable regulatory code performance qualification procedures. At the present time, this acquisition is expected to be issued Full and Open with no set aside. However, in accordance with FAR 19.1305, if your firm is HUBZone certified or FAR 19.1404 if you firm is SDVOSB or FAR 19.501 if your firm is a Small Business and intends to submit an offer on this acquisition, please respond by e-mail to Viki.J.Frey@uscg.mil or by fax (757) 628-4676. Questions may be referred to Viki Frey at (757) 628-4644. In response please include the following: (a) a positive statement of your intent to submit a bid for this solicitation as a prime contractor; (b) evidence of experience in work similar in type and scope to include contract numbers, project titles, dollar amounts, points of contact and telephone numbers; (c) past performance references with points of contact and phone numbers. At least two (2) references are requested, but more are desirable. Contractors are reminded that should this acquisition become a HUBZone set aside, SDVOSB Small Business or Small Business set aside, FAR 52.219-3, Notice of Total HUBZone Set-Aside or FAR 52.219-27, Notice of Total Service-Disabled Veteran-Owned Small Business Set-Aside or FAR 52.214-6, will apply, which requires that at least fifty (50) percent of the cost of personnel for contract performance be spent for employees of the concern or employees of other HUBZone small business concerns. Your response is required by 28 DECEMBER 2006. All of the above must be submitted in sufficient detail for a decision to be made on a HUBZone, Service-Disabled Veteran-owned Small Business set aside or Small Business set aside. Failure to submit all information requested may result in a small business set-aside. A decision on whether this will be pursued as a HUBZone or SDVOSB small business set aside, or a Small Business set aside, will be posted on the FedBizOps website at http://www.fedbizopps.gov.
- Record
- SN01195633-W 20061215/061213220346 (fbodaily.com)
- Source
-
FedBizOpps Link to This Notice
(may not be valid after Archive Date)
| FSG Index | This Issue's Index | Today's FBO Daily Index Page |