MODIFICATION
36 -- EPOXY DISPENSING MACHINE
- Notice Date
- 3/9/2007
- Notice Type
- Modification
- NAICS
- 334514
— Totalizing Fluid Meter and Counting Device Manufacturing
- Contracting Office
- Defense Logistics Agency, Logistics Operations, Defense Distribution Center, 2001 Mission Drive DDC CSS-AB, Bldg 404, New Cumberland, PA, 17070-5001, UNITED STATES
- ZIP Code
- 00000
- Solicitation Number
- Reference-Number-SB3100-7037-3111
- Response Due
- 3/19/2007
- Small Business Set-Aside
- Total Small Business
- Description
- Amendment 0001 to Reference Number SB3100-7037-3111 on epoxy dispensing machine is issued to answer questions and to submit Application Requirements and Material Specifications to the Specifications in order to clarify data. 1. What is the shot size requirement and how long does it have to dispense? Answer: The minimum shot size, under low volume to read 9.444 grams. 2. How many shots are there before the pots have to be refilled? Answer: The number of shots is directly related to the shot size. 2 - 5 gallon tanks divided by 7.182 cc min & 47.878 cc max Shot Size 3. Has a consideration been given to pump directly from the drums the material comes in and eliminating the pressure pots? Answer: The reason for the tanks rather than pumping out of the containers is portability. The Government needs to move the unit around the warehouse floor and the bulk of the units used to pump the liquid out of the cans would increase the size of the cart and limit this use SPECIFICATIONS: Application Requirements: Dispense Volume 2.000 fl oz Dispense Frequency 2.00 ea/minute Flow Rate 4.000 Material Specifications: High Volume Low Volume Type Epoxy Epoxy Product Number FE 6026A FE 6026B Average Viscosity (cps) 55000 60000 Average Specific Gravity 1.24 1.39 Average Weight/Gallon 10.33 11.58 Volume Ratio 1.00 1.00 Weight Ratio 0.89 1.00 Gel Time 45 min Mixed Specific Gravity 1.32 Equipment Specifications: Pump Sizes High Volume: 20.000mm Low Volume: 20.000 mm Minimum Shot Size 7.182 cc 9.444 grams Maximum Shot Size 47.878 cc 62.959 grams At Required Volumetric Ratio 1.00: 1.00 Service Requirements Compressed Air: 5 to 15 cfm @ 80 psi Electric: Non Required All other terms and conditions remain unchanged.
- Place of Performance
- Address: Ogden, UT
- Zip Code: 84056-5848
- Country: UNITED STATES
- Zip Code: 84056-5848
- Record
- SN01247211-W 20070311/070309220324 (fbodaily.com)
- Source
-
FedBizOpps Link to This Notice
(may not be valid after Archive Date)
| FSG Index | This Issue's Index | Today's FBO Daily Index Page |