MODIFICATION
34 -- VERTICAL MACHINING CENTER
- Notice Date
- 3/13/2007
- Notice Type
- Modification
- NAICS
- 333515
— Cutting Tool and Machine Tool Accessory Manufacturing
- Contracting Office
- NASA/Goddard Space Flight Center, Code 210.M, Greenbelt, MD 20771
- ZIP Code
- 20771
- Solicitation Number
- NNG07LJ186270Q
- Response Due
- 3/24/2007
- Archive Date
- 3/13/2008
- Small Business Set-Aside
- N/A
- Description
- The purpose of this amendment is to AMEND DESCRIPTION REQUIREMENTS: Revision to NASA/GSFC requirements description: Item 1 ? Vertical Milling Machine Center Item 2 ? Tooling Package for Tool Holder and Work Holding Item 3 ? Electrical Transformer if needed (incoming voltage is 440V) Item 4 ? Compact Flash Card 1 Gigabyte Item 5 ? Shipping Estimate Vertical Milling Machine Center Specs: 13.6 HP 10,000 rpm direct drive spindle Rigid tapping to 3600 rpm Axis travels: X = 16.14?, Y = 12.20?, Z = 12.99? Maximum Z-Zxis clearance: 18.9? Table capacity: 550 lbs Feedrates to 590 ipm, rapid traverses to 1417 ipm 14 ? station ATC with tool change times of 1.7 seconds (tool ? to tool), 2.7 seconds (chip to chip) Flood coolant Cast iron construction Fanuc 0i-MC control or equal Tooling Certificates Machine Construction Cast Iron Table Size 25.59? x 15.74? Table Surface 3 T-slots (14mm, pitch 125 mm) Table Capacity 550 lbs (uniform load) Coolant tank 26.4 gallons Weight 4400 lbs minimum Power 10kVA Air 4.6 cfm @ 70 psi Performance Feedrate 500 ipm Rapid Traverse 1437 ipm Accuracy 0.00039?/11.8? Repeatability +/- 0.000078? Tooling Tooling JIS B6339-1998 BT 30 MAS 403-1982 P30T-1 Tool Storage 14 tools (random shortest path) Tool Diameter 3.14? (maximum) Tool Length 9.84? (maximum) Tool Weight 6.6 lbs. (maximum) Tool Changes 2.7 seconds (chip-to-chip) Spindle Spindle Taper BT 30 (with air blow) Speed Range 100 ? 10,000 rpm Spindle Type Cartridge direct drive Spindle Motor 13.6 HP minimum Spindle Torque 56 ft lbs @ 1250 rpm minimum Control Features Rigid tapping to 3600 rpm Spindle orientation Helical interpolation Peck Drilling Retraction for rigid tapping 256 K memory Flash card memory RS 232 communications 400 program capacity 54 work offsets Background editing Mirror Image Scaling Coordinate system rotation Custom Macro B Manual handle feed Compact flash card (1 gigabyte) Companies shall provide the information stated in the synopsis/RFQ posted on the NASA Acquisition Internet Service (NAIS)by COB on 03/24/2007. Documents related to this procurement are available over the Internet. These documents reside on a World Wide Web (WWW) server which may be accessed using a WWW browser application. The Internet site, or URL, for the NASA/GSFC Business Opportunities home page is http://prod.nais.nasa.gov/cgi-bin/eps/bizops.cgi?gr=D&pin=51 . Questions regarding this acquisition must be directed to the attention of NADJA HARDY via e-mail at nadja.hardy@nasa.gov, by phone at (301) 286-3462 or facsimile at (301) 286-9159.
- Web Link
-
Click here for the latest information about this notice
(http://prod.nais.nasa.gov/cgi-bin/eps/bizops.cgi?gr=D&pin=51#123891)
- Record
- SN01250129-W 20070315/070313221547 (fbodaily.com)
- Source
-
FedBizOpps Link to This Notice
(may not be valid after Archive Date)
| FSG Index | This Issue's Index | Today's FBO Daily Index Page |