SOLICITATION NOTICE
66 -- PYROLYSIS COMBUSTION FLOW CALORIMETER
- Notice Date
- 4/3/2007
- Notice Type
- Solicitation Notice
- NAICS
- 334513
— Instruments and Related Products Manufacturing for Measuring, Displaying, and Controlling Industrial Process Variables
- Contracting Office
- Department of Commerce, National Institute of Standards and Technology (NIST), Acquisition Management Division, 100 Bureau Drive, Building 301, Room B129, Mail Stop 1640, Gaithersburg, MD, 20899-1640, UNITED STATES
- ZIP Code
- 00000
- Solicitation Number
- SB1341-07-RQ-0141
- Response Due
- 4/17/2007
- Archive Date
- 5/2/2007
- Description
- DESCRIPTION: THIS IS A COMBINED SYNOPSIS/SOLICITATION FOR COMMERCIAL ITEMS PREPARED IN ACCORDANCE WITH THE FORMAT IN FAR SUBPART 12.6-STREAMLINED PROCEDURES FOR EVALUATION AND SOLICITATION FOR COMMERCIAL ITEMS-AS SUPPLEMENTED WITH ADDITIONAL INFORMATION INCLUDED IN THIS NOTICE. SIMPLIFIED ACQUISITION PROCEDURES ARE UTILIZED IN THIS PROCUREMENT. THIS ANNOUNCEMENT CONSTITUTES THE ONLY SOLICITATION; QUOTATIONS ARE BEING REQUESTED, AND A WRITTEN SOLICITATION DOCUMENT WILL NOT BE ISSUED. This solicitation is a Request for Quotation (RFQ). The solicitation document and incorporated provisions and clauses are those in effect through Federal Acquisition Circular (FAC) 2005-16. *** The associated North American Industrial Classification System (NAICS) code for this procurement is 334513. This requirement is unrestricted and all interested Contractors may submit a quote. *** ***The National Institute of Standards and Technology (NIST) has a requirement for one (1) Pyrolysis Combustion Flow Calorimeter to be used in the Fire Research Division at NIST, Gaithersburg, MD. *** All interested Offerors shall provide a quote for the following line item(s): Line Item 0001: One (1) Each, Pyrolysis Combustion Flow Calorimeter. The required calorimeter shall meet or exceed the following specifications: 1. Capable of measuring pyrolysis temperatures, heat release capacities, and heat of combustion of milligram-sized samples (1 mg ? 5 mg) of materials. 2. Include a Windows PC (computer) with a 17 inch LCD monitor, control hardware installed, control and calculation software, and five specimen combustion cups. 3. Operational and analysis software that is fully compatible with programs currently in use by the FAA (Federal Aviation Administration). 4. The hardware and software shall accommodate variable heating rates from 0 K/s to 10 K/s and have the ability to change the atmospheres in both pyrolysis and combustion chambers. Line Item 0002: One (1) Lot, Installation/ Training *** Installation/Training/Warranty 1. The contractor shall schedule and facilitate installation/set-up and one (1) training session for up to one (1) technician at NIST. The training shall provide a thorough demonstration of all equipment functions, maintenance, data administration, and basic troubleshooting. The training may be completed at NIST immediately after installation/set-up and demonstration of performance specifications, but shall be completed no later than 30 days after delivery. The vendor shall provide a list of installation requirements, including house services, with explanations, as soon as the contract is awarded. NIST will provide any required connections to house services. 2. Quotation must include unlimited telephone/e-mail support, and on-site service during the warranty period. This warranty must cover non-consumable parts and travel/labor on-site should this become necessary within the warranty period. *** *** Inspection and Acceptance Criteria 1. Visual-Physical check at NIST laboratory for adherence to design specifications. 2. Performance check at NIST laboratory for adherence to performance specifications. The tests will be performed as soon as the instrument is ready, as determined by the contractor, and may be witnessed by the contractor.*** ****The Government will evaluate information based on the following evaluation criteria: 1) Technical Capability factor "Meeting or Exceeding the Requirement," 2) Past Performance, 3) Previous Experience, and 4) Price. Technical Capability, Past Performance, and Previous Experience, when combined, are more important than Price. Award shall be made on a best value basis. ****Under the Technical Capability factor, stronger consideration will be given to the contractor that provides a technician(s) to perform the service within two (2) weeks of notification and that provides a service warranty longer than one (1) year.**** ****Evaluation of Technical Capability shall be based on the information provided in the quotation. Quotations shall include the make and model of the products, manufacturer sales literature or other product literature, which CLEARLY DOCUMENTS that the offered product(s) meet or exceed the specifications stated above. ****Past Performance will be evaluated to determine the overall quality of the product and service, provided by the Contractor. Evaluation of Past Performance shall be based on the references provided IAW FAR 52.212-1(b)(10) and/ or information provided by NIST or its? affiliates. Quoters shall provide a list of at least three (3) references to whom the same or similar products have been sold. The list of references shall include, at a minimum: The name of the reference contact person and the company or organization; the telephone number of the reference contact person; the contract or grant number; the amount of the contract and the address and the telephone number of the Contracting Officer if applicable; and the date of delivery or the date services were completed. Past Experience shall be evaluated to determine the extent of the Contractor's experience of at least two (2) years in and knowledge in providing similar calorimeters. Evaluation of past performance may be based on contracts used for past performance; however, the vendor should provide additional references relating to its past experience information, if necessary. ***Delivery shall be FOB DESTINATION and be completed in accordance with the Contractor?s commercial schedule. *** ***The contractor shall pack and mark the shipment in conformance with carrier requirements, deliver the shipment in good order and condition to the point of delivery specified in the purchase order, be responsible for any loss of and/or damage to the goods occurring before receipt and acceptance of the shipment by the consignee at the delivery point specified in the purchase order; and pay all charges to the specified point of delivery. The contractor shall deliver all line items to NIST, Building 301, Shipping and Receiving, Gaithersburg, MD 20899-0001. *** The full text of a FAR provision or clause may be accessed electronically at http://acquisition.gov/comp/far/index.html. The following provisions apply to this acquisition: 52.212-1 Instructions to Offerors-Commercial Items; 52.212-3 Offerors Representations and Certifications- Commercial Items. Offerors must complete annual representations and certifications on-line at http://orca.bpn.gov in accordance with FAR 52.212-3 Offerors Representations and Certifications- Commercial Items. If paragraph (j) of the provision is applicable, a written submission is required. The following clauses apply to this acquisition: 52.204-7 Central Contractor Registration; 52.212-4 Contract Terms and Conditions?Commercial Items; 52.212-5 Contract Terms and Conditions Required to Implement Statutes or Executive Orders? Commercial Items including subparagraphs: (14) 52.222-3, Convict Labor; (15) 52.222-19, Child Labor ? Cooperation with Authorities And Remedies; (16) 52.222-21, Prohibition of Segregated Facilities; (17) 52-222-26, Equal Opportunity; (18) 52.222-35, Equal Opportunity for Special Disabled Veterans; (19) 52.222-36, Affirmative Action for Workers with Disabilities; (20) 52.222-37, Employment Reports on Special Disabled Veterans; (24) 52.225-3, Buy American Act - Free Trade Agreements - Israeli Trade Act w/ Alternate I; (26) 52.225-13, Restriction on Certain Foreign Purchases; and (31) 52.232-33, Payment by Electronic Funds Transfer-Central Contractor Registration. NIST LOCAL_41, Software License Addendum Department of Commerce Agency-Level Protest Procedures Level above the Contracting Officer is also incorporated. It can be downloaded at www.nist.gov/admin/od/contract/agency.htm. ***All vendors shall submit the following: 1) An original and one (1) copy of a quotation which addresses all Line Items; 2) Two (2) Originals of the Technical description and/or product literature; 3) Description of commercial warranty; and 4) One (1) copy of the most recent published price list. ***All quotes shall be received not later than 3:30:00 PM local time, on April 18, 2007 at the National Institute of Standards & Technology, Acquisition and Logistics Division, 100 Bureau Drive, Building 301, Room B129, Mail Stop 1640, Gaithersburg, MD 20899-3571, Attn: Prateema Carvajal. Because of heightened security, FED-EX, UPS, or similar delivery methods are the preferred method of delivery of quotes. If quotes are hand delivered, delivery shall be made on the actual due date through Gate A, and a 48 hour (excluding weekends and holidays) prior notice shall be made to the Contracts Office at 301-975-4959. NIST is not responsible for late delivery due to the added security measures. In addition, offerors/quoters who do not provide 24-hour notification in order to coordinate entrance to the NIST campus shall assume the risk of not being able to deliver offers/quotes on time. The Government is not responsible for the amount of time required to clear unannounced visitors, visitors without proper identification and without complete information that would allow delivery (i.e. point of contact, telephone POC, bldg., room number, etc.). If 24 hour notification was not provided, it is suggested your company representative or your courier service arrive at NIST at least 90 minutes prior to the closing time in order to process entry to the campus through the visitor center and complete delivery. Notice shall include the company name, name of the individual making the delivery, and the country of citizenship of the individual. For non-US citizens, the following additional information will be required: title, employer/sponsor, and address. Please ensure that the individual making the delivery brings photo identification, or they will be denied access to the facility. Faxed quotes will NOT be accepted. Emailed quotes will be accepted. ***
- Place of Performance
- Address: 100 Bureau Drive, Building 301, Gaithersburg, MD
- Zip Code: 20899
- Country: UNITED STATES
- Zip Code: 20899
- Record
- SN01264909-W 20070405/070403220238 (fbodaily.com)
- Source
-
FedBizOpps Link to This Notice
(may not be valid after Archive Date)
| FSG Index | This Issue's Index | Today's FBO Daily Index Page |