MODIFICATION
66 -- Real Time X-Ray Equipment
- Notice Date
- 4/25/2007
- Notice Type
- Modification
- NAICS
- 339111
— Laboratory Apparatus and Furniture Manufacturing
- Contracting Office
- Department of the Air Force, Air Force Materiel Command, Hill AFB OO-ALC, OO-ALC/PKXD 6038 Aspen Ave (Bldg 1289), Hill AFB, UT, 84056, UNITED STATES
- ZIP Code
- 84056
- Solicitation Number
- FA8204-07-Q-68072
- Response Due
- 5/2/2007
- Archive Date
- 10/30/2007
- Point of Contact
- Jill Berriochoa, Contracting Officer, Phone 801-777-6108, Fax 801-777-0990,
- E-Mail Address
-
Jill.Berriochoa@hill.af.mil
- Description
- This notice is to reinstate Amendment 2 posted 20 March 2007. The solicitation--and all amendments--was inadvertently deleted when a Notice of Award incorrectly linked this solicitation number with contract FA8204-07-M-0042. To correct the Notice of Award was deleted from FEDBIZOPs (22 Apr 07); unfortunately it then deleted solicitation FA8204-07-Q-68072 in its entirety. Therefore Amendment 2 posted 20 March 2007 is provided below. All interested parties are cautioned to read each notice (each amendment) carefully as the procurement approach to this requirement changed from full & open competition to a 100% Small Business Set-Aside. AMENDMENT #2 - Posted 13 March 2007 The following questions have been asked by interested parties: Q1 - What size X-ray cabinet do you prefer? A1 - There are spacial limitations to both the area the equipment will be in and also access through a door to this area. Therefore, the outside dimensions of the cabinet are as stated in paragraph 1.1.2. of Attachment 1. The X-ray equipment must fit and operate in a (43 inch long X 67 inch wide X 74 inch high) area. Q2 ? What size of sample? A2 ? The inside of the cabinet must be able to fit a minimum of six (5.1 inch X 4 inch) circuit cards with an imaging tilt angle from 0 to 75 degrees from vertical. The inside of the cabinet must also be able to fit a (10 inch X 10 inch X 10 inch) object with an imaging tilt angle from 0 to 75 degrees from vertical. Attachment 1 will be updated to include this information. Q3 ? It states that ? it must e able to fit through (6?10??H X45? W) door without facility modifications? Can you please clarify the dimensions. A2 ? As stated above there are access limitations to the area the equipment will be in. Therefore, the equipment must be able to fit through a (6ft 10 inch) high X 45 inch wide doorway without any facility modifications as stated in paragraph 1.1.1. of attachment 1. Q3 ? There is a requirement that it run off of 110 VAC; is there access to 220VAC? A3 ? The room where this equipment will be utilized has power restrictions as listed in paragraph 1.1.13 of Attachment 1; therefore any/all equipment proposed must be able to function under this constraint. 0-977-2740 1.4.4 The point of contact for the delivery and installation effort is ( CPSG POC Name Address Phone #). CARLOS D. SAMANIEGO 210-977-2740 1.4.5 Delivery, Installation, Certification & Training will be done by United States Citizens and coordinated with CPSG Security office. Visit requests will be provided to the CPSG Security office at least 2 weeks in advance of performing work. CPSG Security Office Point of Contact: CPSG/MSSS 230 Hall Blvd, Ste 121 San Antonio, Texas 78243 210-977-2636 Attention: Frank Flores 1.4.6 Compliance Certification with CFR 1020.40 will be provided to CPSG upon completion of installation and testing of the X-ray equipment and a copy sent to: Jeff Stone, 6030 Gumlane, Building 1217, Hill AFB 84056. 1.4.7 Training will consist of 2 persons for a period of 2 eight hour days. One day of maintenance training and one day of operational training. 1.5 Minimum Warranty Commercial Requirement 1.5.1 X-Ray equipment will have a full 12 months parts and labor warranty 1.5.2 X-ray software & two year software support NOTE: THIS NOTICE WAS NOT POSTED TO FEDBIZOPPS ON THE DATE INDICATED IN THE NOTICE ITSELF (25-APR-2007); HOWEVER, IT DID APPEAR IN THE FEDBIZOPPS FTP FEED ON THIS DATE. PLEASE CONTACT fbo.support@gsa.gov REGARDING THIS ISSUE.
- Web Link
-
Link to FedBizOpps document.
(http://www.fbo.gov/spg/USAF/AFMC/OOALC/FA8204-07-Q-68072/listing.html)
- Place of Performance
- Address: Refer to Attachment 1.
- Zip Code: 78243
- Zip Code: 78243
- Record
- SN01281604-F 20070427/070425224230 (fbodaily.com)
- Source
-
FedBizOpps Link to This Notice
(may not be valid after Archive Date)
| FSG Index | This Issue's Index | Today's FBO Daily Index Page |