SOLICITATION NOTICE
19 -- DRYDOCK FOR USCGC SAILFISH (WPB-87356)
- Notice Date
- 5/1/2007
- Notice Type
- Solicitation Notice
- NAICS
- 336611
— Ship Building and Repairing
- Contracting Office
- Department of Homeland Security, United States Coast Guard (USCG), Commanding Officer (vpl), USCG Maintenance and Logistics Command - Atlantic, 300 East Main Street Suite 600, Norfolk, VA, 23510-9102, UNITED STATES
- ZIP Code
- 00000
- Solicitation Number
- HSCG80-07-Q-3FAJ62
- Response Due
- 6/21/2007
- Archive Date
- 6/21/2008
- Small Business Set-Aside
- Total HUB-Zone
- Description
- This procurement is a HUBZone Small Business Set-Aside. All responsible HUBZone Small Business Concerns may submit an offer, which shall be considered by the U.S. Coast Guard. The solicitation will be issued electronically on the FEDBIZOPPS web page on or about May 04, 2007, at http://www/eps/gov/. Please sign up for the Auto Notification Service to receive e-mail from FEDBIZOPPS when an action is taken under this solicitation. THIS COMMERCIAL ITEM REQUIREMENT IS SET-ASIDE FOR HUBZone SMALL BUSINESS CONCERNS AND WILL BE EVALUATED USING PAST PERFORMANCE AS THE MOST IMPORTANT EVALUATION FACTOR. The USCGC SAILFISH homeport is 1356 Canfield Road, Highlands, NJ 07732. The vessel is an 87 Foot Patrol Boat. Vessel?s availability schedule is for FORTY-TWO (42) calendar days, starting on or about SEPTEMBER 10, 2007. The place of performance will be at the contractor?s facility. Provide all labor, material and equipment necessary to drydock and repair the USCGC SAILFISH (WPB-87356). This work will include, but is not limited to: Welding repairs; Clean and Inspect Fuel and Waste Oil Tanks (includes Disposal); Realign Main Engine/Reduction Gear; Remove, Inspect, and Reinstall Propeller Shaft; Repair Shaft; Straighten Shaft; Inspect Water-Lubricated Shaft Bearings; Remove, Inspect, and Reinstall Propeller; Perform Minor Repairs and Reconditioning of Propeller; Preserve Transducer Hull Rings; Overhaul and Renew Values; Remove, Inspect, and Reinstall Rudder Assemblies; Preserve Main Deck Surfaces; Preserve Underwater Body; Preserver Aluminum Mast In-Place; Inspect Transducer Fairing; Routine Drydocking; Provide Temporary Logistics, Install A/C Rupture Disk Overboard Vent Line, Inspect Hull Plating, and Renew Main Diesel Engine Exhaust Concentric Rings. Trained welders, who have been certified by the applicable regulatory code performance qualification procedures, shall accomplish all welding and brazing. All reference documents are available for viewing at 300 East Main Street, Suite 600, Norfolk, VA 23510-9102. Drawings are now available on CD-ROM. The CD-ROM sets are available for all cutters and will be free of charge to contractors upon request [ten days from solicitation issuance]. MLCA must have ten (10) days advance notice to complete a CD-ROM set of drawings. The CD-ROM(s) contain WINDOWS compliant raster/vector formats (e.g.*.DWF, etc). All responsible sources may submit an offer, which shall be considered by the United States Coast Guard. For information concerning this acquisition contact the Contracting Official listed above. Quotes are due on or about June 21, 2007, 1100 Eastern Standard Time to: Commander (vpl-2) MLCLANT, 300 East Main Street, Suite 600, Norfolk, VA 23510-9102. Requests for Quotations and additional information requests may be faxed to (757) 628-4676 Attn: Lori Ellis.
- Record
- SN01284662-W 20070503/070501220336 (fbodaily.com)
- Source
-
FedBizOpps Link to This Notice
(may not be valid after Archive Date)
| FSG Index | This Issue's Index | Today's FBO Daily Index Page |