MODIFICATION
95 -- Modification #1 issued 5/1/07 at 8 AM to spell out measurements in inches and feet for better understanding.
- Notice Date
- 5/1/2007
- Notice Type
- Modification
- NAICS
- 331492
— Secondary Smelting, Refining, and Alloying of Nonferrous Metal (except Copper and Aluminum)
- Contracting Office
- ACA, Aberdeen Proving Ground, Directorate of Contracting, 4118 Susquehanna Avenue, Aberdeen Proving Ground, MD 21005-3013
- ZIP Code
- 21005-3013
- Solicitation Number
- W91ZLK07T0461
- Response Due
- 5/7/2007
- Archive Date
- 7/6/2007
- Point of Contact
- Tanya Peel, 410-278-0886
- E-Mail Address
-
ACA, Aberdeen Proving Ground
(tanya.peel@us.army.mil)
- Small Business Set-Aside
- Total Small Business
- Description
- This is a combined synopsis/solicitation for commercial items prepared in accordance with the format in Subpart 12.6, as supplemented with additional information included in this notice. This announcement constitutes the only solicitation; quotes are being requested and a written solicitation will not be issued. This acquisition is issued as a Request for Quotes (RFQ). The combined synopsis/solicitation number is W91ZLK-07-T-0461. THIS SOLICITATION IS A 100% TOTAL SMALL BUSINESS SET ASIDE. This solici tation document and incorporated provisions and clauses are those in effect through Federal Acquisition Circular (FAC) 05-16. The associated North America Industry Classification System (NAICS) Code is 331492 and the Business Size Standard is 750. The contractor shall provide the following: Welding and Machine Shop Specific Domestic Metals, delivered, ONLY AS NEEDED, to inlcude scrap metal pick-up for monetary credit. POP: 6/1/07 5/31/08 (12 months). DELIVERY POINT: US Army Ordance Mechanical Maintenance School -WMSD, Building 5014 (Cohen Hall), APG, MD 21005-5201 (FOB DEST). Acceptance shall be at Destination. Please provide a quote based on the following line items: 1. 1/8 inch Aluminum 6061T651, Max Estimated Sheets 4 ft x 8 ft, Qty: 20; 2. 1/8 inch Aluminum 6061T651, Max Estimated Cut Strips 6 in x 12 ft, Qty: 248; 3. ¼ inch Aluminum 6061T651, Max Estimated Sheets 4 ft x 8 ft, Qty: 5; 4. ¼ inch Aluminum 6061T651, Max Estimated Cut Strips 6 in x 12 ft, Qty: 72; 5. ½ inch Aluminum 6061T651, Max Estimated Sheets 4 ft x 8 ft, Qty: 20; 6. ½ inch Aluminum 6061T651, Max Estimated Cut Strips 6 in x 12 ft, Qty: 144; 7. 1/8 inch Stainless Steel 304/11GA, Max Estimated Sheets 4 ft x 8 ft, Qty: 20; 8. 1/8 inch Stainless Steel 304/11GA, Max Estimated Cut Strips 6 in x 12 ft, Qty: 176; 9. 1/16 inch Mild Steel ASTM/A569, Max Estimated Sheets 4 ft x 8 ft, Qty: 10; 10. 1/16 inch Mild Steel ASTM/A569, Max Estimated Cut Strips 6 in x 12 ft, Qty: 88; 11. 1/8 inch Mild Steel ASTM/A569, Max Estimated Sheets 4 ft x 8 ft, Qty: 20; 12. 1/8 inch Mild Steel ASTM/A569, Max Estimated Cut Strips 6 in x 12 ft, Qty: 176; 13. ¼ inch Mild Steel ASTM/A569, Max Estimated Sheets 4 ft x 8 ft, Qty: 25; 14. ¼ inch Mild Steel ASTM/A569, Max Estimated Cut Strips 6 in x 12 ft, Qty: 304; 15. 3/8 inch Mild Steel ASTM/A36, Max Estimated Sheets 4 ft x 8 ft, Qty: 5; 16. 3/8 inch Mild Steel ASTM/A36, Max Estimated Cut Strips 6 in x 12 ft, Qty: 48; 17. ½ inch Mild Steel ASTM/A569, Max Estimated Sheets 4 ft x 8 ft, Qty: 10; 18. ½ inch Mild Steel ASTM/A569, Max Estimated Cut Strips 3 in x 12 ft Cut at a 45 degree Bevel along 12 foot side True 3 inch, Qty: 96; 19. 2 x 2 x ¼ x 12 ft Square Steel Tubing, Max Estimated Quantity of 204 feet; 20. 1/16 inch Copper, Max Estimated Sheets 3 ft x 4 ft, Qty: 1; 21. 2 x 2 x ¼ x 12 ft Angle Iron, Max Estimated Quantity of 504 feet; 22. 3/8 inch MIL STD A 12560, Max Estimated Sheets 4 ft x 8 ft, Qty: 12; 23. 3/8 inch MIL STD A 46100, Max Estimated Sheets 4 ft x 8 ft, Qty: 12; 24. 1 inch Square Aluminum 12 ft, UI = Feet, Total Estimated Quantity in ft: 120; 25. 1 ½ inch Square Aluminum 12 ft, UI = Feet, Total Estimated Quantity in ft: 168; 26. 2 inch Square Aluminum 12 ft, UI = Feet, Total Estimated Quantity in ft: 204; 27. ¼ in x 6 in Bar Stock Aluminum 12 ft, UI = Feet, Total Estimated Quantity in ft:108; 28. 3/8 in x 2 in Bar Stock Aluminum 12 ft, UI = Feet, Total Estimated Quantity in ft: 228; 29. 3/8 in x 3 in Bar Stock Aluminum 12 ft, UI = Feet, Total Estimated Quantity in ft: 60; 30. ½ in x 3 in Bar Stock Aluminum 12 ft, UI = Feet, Total Estimated Quantity in ft: 48; 31. ½ in x 1 ½ in Bar Stock Aluminum 12 ft, UI=Feet, Total Estimated Quantity in ft: 120; 32. 1 in x 4 in Bar Stock Aluminum 12 ft, UI = Feet, Total Estimated Quantity in ft:108; 33. 1 ¼ in x 2 in Bar Stock Aluminum 12 ft, UI = Feet, Total Estimated Quantity in ft: 252; 34. ¾ in Hex Stock Aluminum 12 ft, UI = Fee t, Total Estimated Quantity in feet: 168; 35. 3/8 in Round Stock Aluminum 12 ft, UI = Feet, Total Estimated Quantity in feet:120; 36. ½ in Round Stock Aluminum 12 ft, UI = Feet, Total Estimated Quantity in feet: 60; 37. 1 in Round Stock Aluminum 12 ft, UI = Feet, Total Estimated Quantity in feet: 408; 38. 1 ¼ in Round Stock Aluminum 12 ft, UI = Feet, Total Estimated Quantity in ft: 408; 39. 1 ½ in Round Stock Aluminum 12 ft, UI = Feet, Total Estimated Quantity in ft: 600; 40. 2 in Round Stock Aluminum 12 ft, UI = Feet, Total Estimated Quantity in feet: 300; 41. 3 in Round Stock Aluminum 12 ft, UI = Feet, Total Estimated Quantity in feet: 600; 42. 3/8 in Brass Round Stock 12 ft, UI = Feet, Total Estimated Quantity in feet: 36; 43. ½ in Brass Round Stock 12 ft, UI = Feet, Total Estimated Quantity in feet: 36; 44. 1 ½ in Brass Round Stock 12 ft, UI = Feet, Total Estimated Quantity in feet: 96; 45. ¼ in I.D. Steel Pipe 21 ft, UI = Feet, Total Estimated Quantity in feet: 84; 46. ¼ in Square Steel Stock 12 in, UI = Feet, Total Estimated Quantity in feet: 216; 47. ¼ in x 2 in Steel Flat Stock 20 in, UI = Feet, Total Estimated Quantity in feet: 220; 48. 3/8 in x 3 in Steel Flat Stock 20 in, UI = Feet, Total Estimated Quantity in feet: 40; 49. 1 in x 2 in Steel Bar Stock 1018 12 ft, UI = Feet, Total Estimated Quantity in feet: 300; 50. 1 ½ in x 2 in Steel Bar Stock A108 20 ft, UI = Feet, Total Estimated Quantity in ft: 80; 51. 1 ½ in x 2 in Steel Bar Stock 1018 12 ft, UI = Feet, Total Estimated Quantity in ft: 120; 52. 5/8 in Steel Round Stock 20 in, UI = Feet, Total Estimated Quantity in feet: 220; 53. 1 in Steel Round Stock 20 in, UI = Feet, Total Estimated Quantity in feet: 120; 54. 1 ½ in Steel Round Stock 20 in, UI = Feet, Total Estimated Quantity in feet: 400; 55. 1 7/16 in Steel Hex Stock 20 in, UI = Feet, Total Estimated Quantity in feet: 80; Please contact the POC listed below if you have further questions. In accordance with FAR 52.212-2 Evaluation Commercial Items (Jan 1999), the contract will be awarded to Lowest Price Technically Acceptable (LPTA). The technical evaluation will be a det ermination as to equality of the product and shall be based on information furnished by the vendor. The Government is not responsible for locating or securing any information, which is not identified in the quotation. To ensure sufficient information is av ailable, vendors are requested to provide descriptive material such as illustrations, drawings, or other information necessary for the Government to determine whether the product meets the salient characteristics of the requirement. The Government will awa rd a contract to the offeror whose offer conforms to this solicitation and will be most advantageous to the Government, price and other factors considered. The following clauses will be incorporated by reference. 52.209-6 Protecting the Governments Interest When Subcontracting with contractors debarred, suspended or proposed for debarment. 52.212-4 Contract Terms and Conditions Commercial Items, 52.223-11 Oz one-Depleting Substances, 52-247-34 F.O.B. Destination. The provision at 52.212-1, Instructions to Offerors Commercial, applies to this acquisition The government will award a contract to the offeror whose offer conforms to this solicitation and will be mo st advantageous to the government. The government reserves the right to make an award without discussions. Offeror shall include a completed copy of the provision at 52.212-3, Offeror Representations and Certifications Commercial Items, and DFAR 252.212-70 00, Offeror Representation and Certification with its offer. The clause at 52.212-5, Contract Terms and Conditions Required To Implement Statutes or Executive Orders Commercial Items, applies to this acquisition. The following additional FAR clauses cited in this clause are applicable: FAR 52.203-6, Restrictions on Subcontractor Sales to the Government, with Alternate I, FAR 52.219-6 Notice Of Total Sma ll Business Set-Aside; FAR 52.219-8; Utilization of Small Business Concerns; FAR 52.219-14 Limitations on Subcontracting; FAR 52.222-19 Child Labor-Cooperation with Authorities and Remedies; FAR 52.222-21 Prohibition of Segregated Facilities; FAR 52.222-26 Equal Opportunity; FAR 52.222.35 Equal Opportunity for Special Disabled Veterans, Veterans of the Vietnam Era, and other Eligible Veterans; FAR 52.222-36 Affirmative Action For Workers with Disabilities; FAR 52.222-37, Employment Reports on Disabled Veter ans and Veterans of the Vietnam Era; FAR 52.225-13 Restrictions on Certain Foreign Purchase, FAR 52.232-33, Payment by Electronic Funds Transfer-Central Contractor Registration; DFAR 252.212-7001 Contract Terms and Conditions required to Implement Statutes or Executive Orders applicable to Defense Acquisitions of Commercial Items. The following additional DFAR clauses cited in the clause 252.212-7001 are applicable: 52.203-3 Gratuities, 252.225-7001 Buy America and Balance of Payment Program, 252.225-7012 P reference for Certain Domestic Commodities, 252.225-7015 Preference for Domestic Hand or Measuring Tools , 252.232-7003 Electronic Submission of Payment Requests. The full text of the FAR references may be accessed electronically at this address: http://fa rsite.hill.af.mil, and http://www.acquisition.gov/comp/far/index.html. Responses to this RFQ must be signed, dated, and received via electronic mail or fax by May 7, 2007 no later than 01:00 PM EST at the US Army Contracting Agency, SFCA-NR-APC-T (Tanya Peel), 4118 Susquehanna Avenue, Aberdeen Proving Ground, MD 21005-3013. V endors who are not registered in the Central Contractor Registration (CCR) database prior to award will not be considered. Vendors may register with CCR by calling 1-800-334-3414 or by registering online at www.ccr.gov. For questions concerning this solici tation contact Tanya Peel, Contract Specialist via fax (410)306-3890, or via email tanya.peel@us.army.mil. NOTE: THIS NOTICE WAS NOT POSTED TO FEDBIZOPPS ON THE DATE INDICATED IN THE NOTICE ITSELF (01-MAY-2007); HOWEVER, IT DID APPEAR IN THE FEDBIZOPPS FTP FEED ON THIS DATE. PLEASE CONTACT fbo.support@gsa.gov REGARDING THIS ISSUE.
- Web Link
-
Link to FedBizOpps document.
(http://www.fbo.gov/spg/USA/DABJ/DABJ05/W91ZLK07T0461/listing.html)
- Place of Performance
- Address: ACA, Aberdeen Proving Ground Directorate of Contracting, 4118 Susquehanna Avenue Aberdeen Proving Ground MD
- Zip Code: 21005-3013
- Country: US
- Zip Code: 21005-3013
- Record
- SN01285439-F 20070503/070501235438 (fbodaily.com)
- Source
-
FedBizOpps Link to This Notice
(may not be valid after Archive Date)
| FSG Index | This Issue's Index | Today's FBO Daily Index Page |