MODIFICATION
J -- Repair & Refurbishment of C-5 Aircraft Tail Stand
- Notice Date
- 5/17/2007
- Notice Type
- Modification
- NAICS
- 811310
— Commercial and Industrial Machinery and Equipment (except Automotive and Electronic) Repair and Maintenance
- Contracting Office
- Department of the Air Force, Air Mobility Command, 436th CONS, 639 Atlantic Street, Dover AFB,, DE, 19902-5639, UNITED STATES
- ZIP Code
- 00000
- Solicitation Number
- Reference-Number-F1Q2EM7045A200Tailstand
- Response Due
- 6/29/2007
- Archive Date
- 7/14/2007
- Point of Contact
- Charles Peck, Contract Specialist, Phone 302-677-3744, Fax 302-677-2309,
- E-Mail Address
-
charles.peck@dover.af.mil
- Description
- This notices changes the proposal due date to 29 Jun 07. The pre-proposal conference and site visit minutes are attached along with the questions and answers from this conference. Maintenance records for this stand and a paint report is also attached. This acquisition is for a firm fixed-price contract consisting of a base period for one unit. The base period will be approximately six months in length. The requirement is to repair and refurbish one empennage platform (hereinafter referred to as the tail stand) designed to service the tail components of C-5A aircraft. The tail stand shall be brought to fully functional condition as per original design specifications. The tail stand is a 70-ton (approximate), 70-foot tall, self-propelled lattice structure comprised of square tubing weldments. The main structural members are four leg columns joined by bolting to structural fixed deck supports. The structure is arranged to envelop the tail of the aircraft and provide six work levels, all connected by stairs and serviced by a 1000-pound capacity elevator. The sixth work level provides access to the horizontal stabilizer. Each work level consists of a fixed deck that houses a set of sliding deck panels that are manually pulled out to close the gap between the edge of the fixed deck and the vertical stabilizer. The stand is also equipped with a 1000-pound capacity jib crane, a 1000-pound capacity traveling hoist on an I-beam, and four stabilizing jacks. The tail stand is supported by four two-wheel axles: two fixed axles are powered by a hydrostatic drive, and two steered axles are un-powered. A 107 HP, 2800-RPM gasoline engine provides the power to drive and steer the stand at 2 mph in still air and at a slower speed against 40 mph wind. The nominal working pressure of the hydraulic system is 2000 psi. When in position around the tail, the elevator, jib crane, and the hoist are powered through an electric cable from the hangar power source. Evaluation for award will be Price-Performance Tradeoff (PPTO). Issuance of the solicitation was posted on 12 April 2007 and will close on or about 29 June 2007. A pre-proposal conference and site visit was held on Dover AFB DE on 3 May 07. The solicitation will be available over the Internet only. NO HARD COPIES will be sent. Follow the links on the EPS website to access the solicitation: USAF Offices, Air Mobility Command, and 436 CONS. Once the solicitation is posted, it is incumbent upon the interested parties to review this site frequently for any updates/amendments to any and all documents. All prospective contractors must be registered in the Central Contractor Registration (CCR) in order to be eligible for award. IMPORTANT INFORMATION FOR CONTRACTORS: Any award resulting from the solicitation will include DFARS Clause 252.237-7003, Electronic Submission of Payment Requests. Section 1008 of the National Defense Authorization Act for Fiscal Year 2001 requires any claims for payments (invoices) under DoD contract to be submitted in electronic form. Wide Area Workflow-Receipt and Acceptance (WAWF- RA) is the DoD system of choice for implementing this statutory requirement. Use of the basic system is at NO COST to the contractor and training will be provided. Information available at no cost is located at http://www.wawftraining.com. Interested parties should provide all required information within the prescribed time constraints via mail to 436th Contracting Squadron/LGCB , Attn: Chuck Peck, 639 Atlantic Ave, Dover AFB, DE 19902 or by fax to 302-677-2309. The POC for this acquisition is Mr. Chuck Peck (302) 677-3744, E-Mail Charles.Peck@dover.af.mil.
- Place of Performance
- Address: Dover AFB DE
- Zip Code: 19902
- Country: UNITED STATES
- Zip Code: 19902
- Record
- SN01296855-W 20070519/070517221045 (fbodaily.com)
- Source
-
FedBizOpps Link to This Notice
(may not be valid after Archive Date)
| FSG Index | This Issue's Index | Today's FBO Daily Index Page |