Loren Data's SAM Daily™

FBO DAILY ISSUE OF MAY 25, 2007 FBO #2006
SOURCES SOUGHT

28 -- Seeking small business Authorized Cummins Diesel Engine repair service provider for work in northern California area.

Notice Date

5/23/2007
 

Notice Type

Sources Sought
 

Contracting Office

DOT/Maritime Administration, WR Acquisition 201 Mission Street, Suite 1800 San Francisco CA 94105
 

ZIP Code

94105
 

Solicitation Number

DTMA4Q07012
 

Response Due

5/30/2007
 

Archive Date

5/22/2008
 

Small Business Set-Aside

Total Small Business
 

Description

Seeking small business Authorized Cummins Diesel Engine repair service provider for work in northern California area. Please contact me, Debra Velmere, Contracting Officer, perferably by email at debbie.velmere@dot.gov. Statement of Work Diesel Engine Rebuilding, Cummins Model NT-855 "Big Cam" The intent of this statement of work is to rebuild two (2) Cummins Model NT-855 "Big Cam" diesel engines that serve as main propulsion engines for Suisun Bay Reserve Fleet's PG-type service craft. The contractor shall pick up both engines for rebuilding and return when all work specified herein is complete. Both engines have been removed from the craft and have been disconnected from their transmissions. The contractor is not responsible for removing or installing the engines in the service craft. 1. Cummins Model NT-855, serial number 11339163 Rebuild engine as necessary. This engine suffered an overheating and loss of lubricating oil condition that has most likely resulted in piston and/or bearing seizure. Cause was a failed rear oil seal after ten (10) hours of operation since last overhaul and subsequent storage of approximately 4 years. Inspect, replace and/or reuse engine components as required to return engine to the manufacturer's operating specifications or tolerances. Replace all hoses and filters, replace lube oil and coolant, filling to proper operating levels. After final assembly, recoat engine. Dyno-test the engine after rebuilding, bringing the engine to proper operating temperature and RPM. Provide full dyno report. 2. Cummins Model NT-855, serial number 11503223 Rebuild engine as necessary. This engine is in operating condition with low oil pressure, after approximately 500 hours of operation since last overhaul. Inspect, replace and/or reuse engine components as required to return engine to the manufacturer's operating specifications or tolerances. Replace all hoses and filters, replace lube oil and coolant, filling to proper operating levels. After final assembly, recoat engine. Dynamometer test the engine after rebuilding, bringing the engine to proper operating temperature and RPM. Provide a full dynamometer test report. Preserve engine for storage, and procedures for reactivation.
 

Web Link

Please click here to view more details.
(http://ideasec.nbc.gov/j2ee/announcementdetail.jsp?serverId=MR693800&objId=304958)
 

Place of Performance

Address: 2595 Lake Herman Road Benicia CA

Zip Code: 94510

Country: USA
 

Record

SN01301231-W 20070525/070523220747 (fbodaily.com)
 

Source

FedBizOpps Link to This Notice
(may not be valid after Archive Date)

---

| FSG Index  |  This Issue's Index  |  Today's FBO Daily Index Page |