SOLICITATION NOTICE
51 -- Aviation application, rivet hammers, bucking bars, tool cases, foam inserts for cases. Sole source for Atlas Copco, hammers, Pelican cases;
- Notice Date
- 6/5/2007
- Notice Type
- Solicitation Notice
- Contracting Office
- N00244 Naval Base 937 North Harbor Drive San Diego, CA
- ZIP Code
- 00000
- Solicitation Number
- N0024407T0580
- Response Due
- 6/13/2007
- Archive Date
- 7/13/2007
- Description
- SECTION A: This is a combined synopsis/solicitation for commercial items prepared in accordance with FAR Par 12.6 as supplemented with additional information included in this notice. This announcement constitutes the only solicitation; proposals are being requested and a written solicitation will not be issued. This effort is a sole source acquisition under FAR 6.302-1(a)(1), IAW the authority 10 U.S.C. 2304(c)(1), Only one responsible source and no other supplies or services will satisfy agency requirements. The sole source is for rivet hammers and bucking bars manufactured by: Atlas Copco, cage: 1JAL0. Cases are manufactured by Pelican. Foam Inserts are manufactured by Aviation Direct Mfg., LLC. Request for Quotation (RFQ): N00244-07-T-0580 is hereby issued. The RFQ and incorporated provisions and clauses are those in effect through FAR FAC 2005-16, class deviation 2005-o0001 and DFARS-DCN 20070531. This solicitation is restricted. NAICS Code 423830 is applicable and business size is 100 employees. The following items are required: Line Item 0001: Tool Box control foam, pn: 99-toolfoam, (9) each; specs: foam pallet and inserts, dimensions: 12.9? x 12.7? x 6.7? to fit ?Pelican Products? case #1520. The foam is manufactured from 6lb, high density, closed cell, polyethylene foam in 1? black and ?? yellow. Line Item 0002: Tool box cases, pn: 1520NF (no foam), (9) each, mfr. Pelican Products Line Item 0003: Rivet Hammer, pn: 8426110105, model: RRN-11P-01, (9) each, Atlas Copco Line Item 0004: Rivet Hammer, pn: 8426110927, model: RRH-04P-12-T-S, (9) each, Atlas Copco Line Item 0005: Rivet Hammer, pn: 8426111066, model: RRH-06P-TS-NPT, (9) each, Atlas Copco Line Item 0006: Tool Box control foam, pn: 99-toolfoam, (5) each; specs: foam pallet and inserts, dimensions: 12.9? x 12.7? x 6.7? to fit ?Pelican Products? case #1520. The foam is manufactured from 6lb, high density, closed cell, polyethylene foam in 1? black and ?? yellow. Line Item 0007: Tool box cases, pn: 1520NF (no foam), (5) each, mfr. Pelican Products Line Item 0008: Vibration Dampened Bucking Bars, pn: 8426910174, model: RBB-10SP, (5) each, Atlas Copco Line Item 0009: Vibration Dampened Mini Bucking Bars, pn: 8426910110, model: RBB-04SP-01, (5) each, Atlas Copco Line Item 0010: Vibration Dampened Mini Bucking Bars, pn: 8426910112, model: RBB-04SP-03, (5) each, Atlas Copco Line Item 0011: Vibration Dampened Bucking Bars, pn: 8426910113, model: RBB-04SP-04 Bucking, (5) each, Atlas Copco Line Item 0012: Vibration Dampened Bucking Bars, pn: 8426910114, model: RBB-04SP-05, (5) each, Atlas Copco Line Item 0013: Vibration Dampened Bucking Bars, pn: 8426910186, model: RBB-10SP-U, (10) each, Atlas Copco Line Item 0014: Type ?C? Dolly, .8lb, pn: 3085036493, (5) each, Atlas Copco Line Item 0015: Type ?C? Dolly, 1 lb, pn: 3085033694, (5) each, Atlas Copco Inspection and acceptance will be made at Destination by the Government. Delivery will be made to the FRC-SW, Bldg. 94, San Diego, CA 92135. Required delivery date is (30) days after receipt of order. THE FOLLOWING PROVISIONS AND CLAUSES ARE APPLICABLE AND ARE HEREBY INCORPORATED INTO THE SOLICITATION BY REFERENCE AND BY FULL TEXT. THE FULL TEXT OF THE CLAUSES/PROVISIONS FROM THE FAR AND DFARS CAN BE ACCESSED VIA THE INTERNET USING THE FOLLOWING WEB-SITE ADDRESS: www.arnet.gov or http://farsite.hill.af.mil It is the responsibility of the offerors to obtain copies of the necessary provisions and or clauses that are required as a part of this solicitation. Required clauses/provisions that are not submitted may render an offer not to be accepted by the Government. SECTION B: FAR 52.212-1, Instructions to Offerors Commercial Items NOTE: This provision must be reviewed completely. It contains the guidelines for submission of your quotation. Addendum to FAR 52.212-1: FAR 52.215-5 Facsimile Proposals, (c) Fax: 619-532-1088 SECTION C: FAR 52.212-2 Evaluation of Commercial Items; (a) The Government will award a Firm Fixed Price purchase order resulting from this solicitation to the responsible offeror whose offer conforming to the solicitation will be most advantageous and considered the ?Best Value? to the Government, price and other factors considered. The following factors shall be used to evaluate the quotation: (i) Technical capability of the contractor to provide the item. To be determined technically acceptable, the contractor must furnish information regarding their capability of performing the services required to manufacture the dolly. Descriptive literature/pictures that provide pertinent information will be accepted and reviewed. Data must be submitted in accordance with FAR 52.212-1(b)(4). It is preferred that technical information be provided in Adobe ?pdf? file format, if possible. Contractors meeting the criteria under (i) will have their quotation further evaluated under factors ii and iii and (iv) (ii) Past Performance: Provide Past Performance data on your companies? two most recently completed Federal Government contracts (Not to exceed (3) years since completion) for like or similar material required by this solicitation. If you do not have Federal Government contracts, list State, Local or commercial contracts. See Past Performance data sheet below. Provide contract number, date of contract, quantity, unit price and the name of Government activity or commercial company, point of contact/phone number. This Performance data will be used to evaluate your companies past performance in meeting contract cost/price, technical and delivery objectives. (iii) Pricing: Contractors must provide a unit current pricing for the CLIN specified and a total cost for each line item under this solicitation. Pricing will be evaluated against other quotations received. (iv) Provide delivery date; Payment terms and any prompt payment discount terms; Ability to meet the requirements set forth in this RFQ shall be demonstrated by the contractor?s submission of a signed quotation which has not taken exception to the schedule. Quotations which take exception and do not meet the Government?s requirement may be determined to be unacceptable and not considered for award. At the discretion of the Contracting Officer, the Government intends to evaluate quotations without discussions and award a Firm Fixed Price purchase order. Each initial offer should, therefore contain the contractors best terms from both a technical, delivery and pricing standpoint. The Government reserves the right to make award to other than low offeror when it has been determined by the Contracting Officer to be in the best interest of the Government. SECTION D: FAR 52.212-3, Offeror Representation and Certifications-Commercial Items-ALT I-OCT 1998; Incorporated by reference; NOTE: This provision is considered a ?fill-in.? All applicable fields must be completed. Submit this provision with your quotation. 52.204-7 Central Contractor Registration (Oct 2003); 52.204-8 Annual Representations and Certifications (Jan 2006); Clauses and provisions can be viewed/downloaded at: www.farsite.hill.af.mil or SECTION E: FAR 52.212-4 Contract Terms and Conditions Commercial Items; Addendum to FAR 52.212-4 are hereby incorporated by reference or full text as applicable: FAR 52.247-34 FOB Destination; FISC-SD local clauses: 331 Review of Agency Protests (MAR 2000); 332 Unit Prices (OCT 2001); 52.219-6 Notice of Small Business Set-aside-Jul 1996; 52.204-7 Central Contractor Registration (Oct 2003); 52.204-8 Annual Representations and Certifications (Jan 2006) SECTION F: FAR 52.212-5 Contract Terms and Conditions Required to Implement Statutes or Executive Orders-Commercial Items (Deviation) applies with following applicable clauses for paragraph (b): FAR 52.219-4 Restrictions on Subcontractor Sales to the Government; FAR 52.219-8 Utilization of Small Business Concerns; FAR 52.222-21 Prohibition on Segregated Facilities, FAR 52.222-26 Equal Opportunity, FAR 52.222-35 Affirmative Action for Special Disabled and Vietnam Era Veterans, FAR 52.222-36 Affirmative Action for Handicapped Workers, FAR 52.222-37, Employment Reports on Special Disabled Veterans and Veterans of the Vietnam Era, 52.232-22 Payment by Electronic Funds Transfer-Central Contractor Registration; DFARS 252.225-7007 Buy American Act, Trade Agreements, Balance of Payments Program; DFARS 252.225-7036 Buy American Act, North American Free Trade Agreement Implementation Act, Balance of Payments Program; SECTION G: DFARS 252.212-7001 Contract Terms and conditions required to implement statutes or executive orders applicable to defense acquisitions of commercial items-JAN 1999, 252.204-7004 Required Central Contractor Registration; DFARS 252-225-7007 Trade Agreements-Balance of Payments Program, DFARS 252.225-7012 Preference for Certain Domestic Commodities, DFARS 252.247-7024 Notification of Transportation of Supplies by Sea; 252.232.7003 Electronic submission of payment requests Jan 2004; End of Clauses/Provisions. IMPORTANT NOTICE: DFARS 252.204-7004 ?Central Contractor Registration? (CCR) is required and applies to all solicitations issued on/after 6-1-98. Lack of registration in the CCR database will make an offeror/quoter ineligible for award of a contract/purchase order. Please ensure compliance with this regulation when submitting your quote. Utilize the CCR website at http://www.ccr.gov and/or call the CCR Assistance Center at 888-227-2423 for more information. Requests for technical and or contractual clarification are to be submitted to the Contracting Officer via email. Quotation information may be submitted electronically via e-mail (Adobe pdf), by separate computer disk in MS Word (latest version) or by fax. Submit responses to: Fleet and Industrial Supply Center, Regional Contracts Dept., 937 N. Harbor Dr., Ste. 60, San Diego, CA 92132-0060 Attn: Ralph Franchi, Code 240, 619-532-2517, 619-532-1088 fax. ralph.franchi@navy.mil Reference solicitation number: N00244-07-T-0580 on all documents and requests for information. Quotes must be received no later than COB 1600 p.m. (PST) on June 13, 2007.
- Record
- SN01310771-W 20070607/070606084633 (fbodaily.com)
- Source
-
FedBizOpps Link to This Notice
(may not be valid after Archive Date)
| FSG Index | This Issue's Index | Today's FBO Daily Index Page |