MODIFICATION
95 -- Metal
- Notice Date
- 6/14/2007
- Notice Type
- Modification
- Contracting Office
- 100 Bureau Drive, Gaithersburg, MD 20899
- ZIP Code
- 20899
- Solicitation Number
- NB059000-7-04394
- Response Due
- 6/18/2007
- Archive Date
- 12/15/2007
- Small Business Set-Aside
- N/A
- Description
- AMENDMENT NOTICE: This is a combined synopsis/solicitation for commercial items prepared in accordance with the format in FAR Subpart 12.6, in conjunction with FAR 13.5, as applicable, and as supplemented with additional information included in this notice. This announcement constitutes the only solicitation; bids are being requested and a written solicitation will not be issued. The solicitation number is NB059000-7-04394 and is issued as an invitation for bids (IFB), unless otherwise indicated herein. The solicitation document and incorporated provisions and clauses are those in effect through Federal Acquisition Circular FAC 05-16. The associated North American Industrial Classification System (NAICS) code for this procurement is 331112 with a small business size standard of 750 employees. This requirement is unrestricted and only qualified offerors may submit bids. The solicitation pricing on www.FedBid.com will start on the date this solicitation is posted and will end on 2007-06-18 10:00:00.0 Eastern Time or as otherwise displayed at www.FedBid.com. FOB Destination shall be gaithersburg, MD 20899 The National Institute of Standards and Technology requires the following items, Purchase Description Determined by Line Item, to the following: LI 001, ALUMINUM,SHEET,ALLOY 2024-T351, MILL FINISH, SIZE 48" X 96", 1" THICK., 2, SH; LI 002, ALUMINUM,ROD,ALLOY 2024-T351, ROUND, COLD FINISHED 5/8" DIAMETER., 10, LN; LI 003, ALUMINUM, ROD, ROUND, ALLOY 2024-T351, COLD FINISHED, DIA. 1 IN., MARK OR STENCIL IN INK ALLOY OR SPEC NO. ON EACH PIECE, MUST BE 12 FT. LENGTHS ONLY, 11.292 LBS. PER 12 FT. LENGTH, 6, LN; LI 004, ALUMINUM,ROD,ALLOY 2024-T351, ROUND, COLD FINISHED 1-1/4" DIAMETER, 4, LN; LI 005, ALUMINUM,BAR,ALLOY,2024-T351, COLD FINISHED, 1-1/4 IN SQUARE.FS QQ-A-225/6. MARKOR STENCIL IN I NK ALLOY OR SPEC NO. ON EA. PC. 1.867 LBS/FT. MUST BE 12 FT LENGTHS., 4, LN; LI 006, ALUMINUM, SHEET, ALLOY 5052-H32, MILL FINISH, 36" X 96" X.025" THICK. F.S. #QQ-A-250/8, 10, SH; LI 007, ALUMINUM, CHANNEL, ALLOY 6061-T6, STRUCTURAL, 1.596IN X 3IN X1.596IN X 0.356IN.(EST. WT.2.07LBS/ FT.) FS QQ-A-200/8 (25FT/LENGTH/51.75 LBS, 6, LN; LI 008, ALUMINUM, ALLOY 6061-T6, MILL FINISH,SHT 48 X144IN , THICK .190IN. FS QQ-A-250/11. MARK OR STENCIL IN INK ALLOY OR SPEC NO. ON EA. PC. 2.65 LBS/SQ.FT., 4, SH; LI 009, ALUMINUM, ALLOY 6061-T6, MILL FINISH, PLATE 48 IN X 144 IN, .250 IN THICK. FS QQ-A-250-11. MARK OR STENCIL IN INK ALLOY OR SPEC NUMBER ON EACH PIECE. 3.53 LBS/SQ FT. (NOTE: WILL ACCEPT 48-1/2 IN X 144-1/2 IN SHEET) NOTE: NO SHEARED EDGES, 6, SH; LI 010, ALUMINUM, SHEET, ALLOY 6061-T6, MILL FINISH, PLATE 48IN X 96 IN, THICK 1 IN. FS QQ-A-250 /11 F.S. #QQ-A-250/11. MARK OR STENCIL IN INK ALLOY OR SPEC. NO ON EA. PIECE. 14.12 LBS./FT. NO SHEARED EDGES, 2, SH; LI 011, ALUMINUM, SHEET, ALLOY 6061-T6, MILL FINISH. 48 IN X 96 IN, 1-1/2 IN THICK. 1 PLATE IS 675.84 LBS. MARK OR STENCIL IN INK ALLOY OR SPEC NUMBER ON EACH PIECE. WRITTEN CERTIFICATION OF ALLOY AND PACKING SLIP REQUIRED ON EACH DELIVERY. 21.12LBS/SQ.FT, 2, SH; LI 012, ALUMINUM, ROD, ALLOY 6061-T6, ROUND, 1/4" DIAMETER, DRAWN. F.S. #QQ-A-225/8., 10, LN; LI 013, ALUMINUM, ROD, ALLOY 6061-T6, ROUND, COLD FINISHED, 1 IN DIAMETER. FS QQ-A-225/8. MARK OR STENCIL IN INK ALLOY OR SPEC NUMBER ON EACH PIECE. MUST ORDER IN 12 FT LENGTHS. .951 LBS/FT. (STOREROOM ISSUES BY INCH, 4, LN; LI 014, ALUMINUM, ROD, ALLOY 6061-T6, ROUND, ROLLED, 1-3/4 IN DIAMETER. FS QQ-A-225/8. MARK OR STENCIL IN INK THE ALLOY OR SPEC NUMBER ON EACH PIECE. 2.914 LBS/FT. MUST ORDER IN 12 FT LENGTH, 2, LN; LI 015, ALUMINUM, ROD, ALLOY 6061-T6, ROUND, 4-1/2 IN. DIA. ROLLEDM FS QQ-A-225/8, MARK OR STENCIL IN INK ALLOY OR SPEC. NO. ON EAC PIECE, MUST BE 4 FT. LENGTH, 10.058 LBS/FT., 2, LN; LI 016, ALUMINUM, ALLOY BAR, EXTRUDED, 6061-T6511 TEMPER, SQUARE, 1-1/2IN X 1-1/2 IN., MUST BE 12FT/LENGTH. MARK OR STENCIL IN INK ALLOY OR SPEC. NO. ON EACH PIECE, 32.40 LBS/12 FT.LENGTH, 4, LN; LI 017, ALUMINUM, FLAT, ALLOY 6061-T6, FLAT, SQUARE EDGE, 3/16" THICK, 3" WIDE. F.S. #QQ-A-200/8., 4, LN; LI 018, ALUMINUM, FLAT, ALLOY 6061-T6511, TEMPER, RECTANGULAR, 1/4IN THICK, 1IN WIDE, MUST BE 12 FT LENGTH. F.S. #QQ-A-200/8. MARK OR STENCIL IN INK ALLOY OR SPEC NO. EA. PIECE, 6, LN; LI 019, ALUMINUM, FLAT, TEMPER, ALLOY 6061-T6, FLAT, SQUARE EDGE, 1/4IN THICK, 1-1/4IN WIDTH.MUST BE 12FT LENGTH. F.S. #QQ-A-200/8. MARK OR STENCIL IN INK ALLOY OR SPEC NO. ON EA. PIECE. 0.376 LBS. LINEAR FT. 4.512 LBS/12FT LG, 6, LN; LI 020, ALUMINUM, BAR, ALLOY 6061-T6, FLAT, RECTANGULAR, SQUARE EDGE, SIZE 1/4 X 2-1/2 IN. ORDER IN 12 FT LENGTHS. MARK OR STENCIL IN INK ALLOY OR SPEC NUMBER ON EACH PIECE., 4, LN; For this solicitation, National Institute of Standards and Technology intends to conduct an online competitive reverse auction to be facilitated by the third-party reverse auction provider, FedBid, Inc. FedBid has developed an online, anonymous, browser based application to conduct the reverse auction. An Offeror may submit a series of pricing bids, which descend in price during the specified period of time for the aforementioned reverse auction. National Institute of Standards and Technology is taking this action in an effort to improve both vendor access and awareness of requests and the agency's ability to gather multiple, completed, real-time bids. All responsible Offerors that respond to this solicitation MUST submit the pricing portion of their bid using the online exchange located at www.FedBid.com. There is no cost to register, review procurement data or make a bid on www.FedBid.com. Offerors that are not currently registered to use www.FedBid.com should proceed to www.FedBid.com to complete their free registration. Offerors that require special considerations or assistance may contact the FedBid Helpdesk at 877-9FEDBID (877-933-3243) or via email at clientservices@fedbid.com. Offerors may not artificially manipulate the price of a transaction on www.FedBid.com by any means. It is unacceptable to place bad faith bids, to use decoys in the www.FedBid.com process or to collude with the intent or effect of hampering the competitive www.FedBid.com process. Should offerors require additional clarification, contact Prateema Carvajal at prateema.carvajal@nist.gov or FedBid at 877-9FEDBID (877-933-3243) or clientservices@fedbid.com. Use of FedBid: Buyers and Sellers agree to conduct this transaction through FedBid in compliance with the FedBid Terms of Use. Buyers and Sellers understand that FedBid ranks all bids by price; however, pursuant to applicable acquisition regulations and/or departmental guidelines, Buyers may use criteria other than price to evaluate offers. Accordingly, please note that, unless otherwise specified herein below, to the extent required by applicable regulations and/or guidelines, award will be made to the responsible Seller whose offer conforming to the solicitation will be most advantageous to the Buyer on the basis of price, technical capability, delivery, and past performance. CCR Requirement - Company must be registered on Central Contractor Registration (CCR) before an award could be made to them. If company is not registered in CCR, they may do so by going to CCR web site at http://www.ccr.gov. The following FAR clauses in paragraph (b) of FAR clause 52.212-5, Contract Terms and Conditions Required To Implement Statutes or Executive Orders-Commercial Items, will apply: 52.222-3, 52.222-19, 52.222-21, 52.222-26, 52.222-35, 52.222-36, 52.222-37, 52.225-3 with Alternate I, 52.225-13, 52.232-33. The full text of a FAR clause may be accessed electronically at http://www.acqnet.gov/far. The selected Offeror must comply with the following commercial item terms and conditions. FAR 52.212-1, Instructions to Offerors - Commercial, applies to this acquisition. The selected Offeror must submit a completed copy of the provision at 52.212-3, Offeror Representations and Certifications - Commercial Items. FAR 52.212-4, Contract Terms and Conditions - Commercial Items, applies to this acquisition. In addition to providing pricing at www.FedBid.com for this solicitation, each Offeror must provide any required, NON-PRICING responses (e.g. technical proposal, representations and certifications, etc.) directly to null (NOT THROUGH FEDBID.COM) so that they are received at that email address no later than the closing date and time for this solicitation. Delivery shall be made within 30 days or less after receipt of order (ARO).
- Web Link
-
www.fedbid.com (b-40382_03, n-6146)
(http://www.fedbid.com)
- Place of Performance
- Address: gaithersburg, MD 20899
- Zip Code: 20899-1640
- Country: US
- Zip Code: 20899-1640
- Record
- SN01318725-W 20070616/070614220540 (fbodaily.com)
- Source
-
FedBizOpps Link to This Notice
(may not be valid after Archive Date)
| FSG Index | This Issue's Index | Today's FBO Daily Index Page |