Loren Data's SAM Daily™

FBO DAILY ISSUE OF JUNE 22, 2007 FBO #2034
MODIFICATION

49 -- Air Compressor Unit and Purification System for the Tennessee Army National Guard.

Notice Date

6/20/2007
 

Notice Type

Modification
 

NAICS

423830 — Industrial Machinery and Equipment Merchant Wholesalers
 

Contracting Office

USPFO for Tennessee, P.O. Box 40748, Nashville, TN 37204-0748
 

ZIP Code

37204-0748
 

Solicitation Number

W912L7-T-0007
 

Response Due

6/22/2007
 

Archive Date

8/21/2007
 

Point of Contact

John Anders, 615-736-7912
 

E-Mail Address

Email your questions to USPFO for Tennessee
(john.anders@usace.army.mil)
 

Small Business Set-Aside

N/A
 

Description

The above referenced solicitation is hereby amended to change the quote submission due date from June 18 2007 close of business 4:30 p.m. local central standard time to June 22 2007 close of business 4:30 p.m. local central standard. Quotes shall ei ther be sent by email to john.anders@ng.army.mil and not to john.anders@usace.army.mil or they can be submitted by facsimile to 615-313-2659. The specification and special features are listed below. The only changes is where there were double quotes repres enting inches the word inches is annotated. SPECIFICATIONS AND JUSTIFICATION PAINT BOOTH AIR COMPRESSOR/PURIFIER I. SPECIFICATIONS: GENERAL: Provide a reciprocating air compressor consisting of compressors, v-belts, receiver and controls. Control panel shall have remote monitoring capability and be complete with starters, transformer, automatic alternation with lead/lag, test/off/ru n switches, lead select/auto switch, operating lights, motor fault indication, hour meters, thermal overload protection and be mounted and wired. Provide a breathing air purifier with cooler and dryer complete with all necessary filters and connections. The system must be fully compatible with the shops existing supplied air system. DIMENSIONS/ CAPACITIES: A. The compressor must be capable of less than 4 ppm oil carryover while producing at least 75 ACFM @ between 150 -195 PSIG. Compressor shall be mounted on a 200 - 260 gallon ASME tank receiver with electric drain and relief valve. Compressor is to be p ressure lubricated with load-less start and provided with a low oil level protection device, oil pump and replaceable oil filter. Compressor shall be of robust materials. Valves shall be individually replaceable and be the disc type. Crankshaft shall b e balanced and counterweighted. Heads shall have safety valves. B. A breathing air purifier will purify at least 10 scfm @ 100 psig from and comply with OSHA grade D, NFPA-99. The purifier shall not exceed W - 18 inches, D  60 inches, H  80 inches and weight no more than 300 lbs. C. A dry (non glycol thermal bank) cycling refrigerated air dryer will deliver between 200 - 300 scfm @ 100 psig in compliance with CAGI (ADF 100) / NFPA (class H ), inlet air temp 100 deg. F and ambient air temp 100 deg. F. The cooler/dryer shall not e xceed W  30 inches, L  30 inches, H  40 inches . OPERATION. The compressor shall have a high efficiency motor rated at least 24HP. The motor is to operate with 220V or 460V-3-Ph- 50 - 60 Hz. Unit must be rated for 100% duty cycle @ 200 psig. SAFETY. The unit must meet USA standard CGA G7.1-1997. Provided air must have carbon dioxide less than 500 ppm, carbon monoxide less than 5 ppm. The package shall include pre and after filters. ACCESSORIES. Provide a coalescing filter rated at 300 scfm @ .01 micron oil retention, with auto drain and differential pressure indicator. INSTALLATION: Provide installation and start up training in accordance with the manufactures recommendations. Factory trained representative shall be available on site to instruct and train in the proper operation of the equipment provided. The factory authorized service must be available within 30 miles due to the critical nature of the equipment to the continued uninterrupted requirement of the operation. All components less filters will have at least a 1-year warranty. . II. JUSTIFICATION: The system is required to upgrade the paint system to be compatible with the new water based CARC paint. This is in compliance with the Clean Air Act (SEC 112, 40 CFR). III. LOCATION: Combined Support Maintenance Shop, 321 Weakley Lane, Smyrna, TN 37167.
 

Place of Performance

Address: USPFO for Tennessee P.O. Box 40748, Nashville TN

Zip Code: 37204-0748

Country: US
 

Record

SN01323702-W 20070622/070620221557 (fbodaily.com)
 

Source

FedBizOpps Link to This Notice
(may not be valid after Archive Date)

---

| FSG Index  |  This Issue's Index  |  Today's FBO Daily Index Page |