SOLICITATION NOTICE
66 -- Balances
- Notice Date
- 6/27/2007
- Notice Type
- Solicitation Notice
- NAICS
- 334513
— Instruments and Related Products Manufacturing for Measuring, Displaying, and Controlling Industrial Process Variables
- Contracting Office
- Department of Commerce, National Institute of Standards and Technology (NIST), Acquisition Management Division, 100 Bureau Drive, Building 301, Room B129, Mail Stop 1640, Gaithersburg, MD, 20899-1640, UNITED STATES
- ZIP Code
- 00000
- Solicitation Number
- SB1341-07-RQ-0278
- Response Due
- 7/12/2007
- Archive Date
- 7/27/2007
- Description
- THIS IS A COMBINED SYNOPSIS/SOLICITATION FOR COMMERCIAL ITEMS PREPARED IN ACCORDANCE WITH THE FORMAT IN FAR SUBPART 12.6-STREAMLINED PROCEDURES FOR EVALUATION AND SOLICITATION FOR COMMERCIAL ITEMS-AS SUPPLEMENTED WITH ADDITIONAL INFORMATION INCLUDED IN THIS NOTICE. SIMPLIFIED ACQUISITION PROCEDURES ARE UTILIZED IN THIS PROCUREMENT. THIS ANNOUNCEMENT CONSTITUTES THE ONLY SOLICITATION; QUOTATIONS ARE BEING REQUESTED, AND A WRITTEN SOLICITATION DOCUMENT WILL NOT BE ISSUED. This solicitation is a Request for Quotation (RFQ). The solicitation document and incorporated provisions and clauses are those in effect through Federal Acquisition Circular (FAC) 2005-17. *** The associated North American Industrial Classification System (NAICS) code for this procurement is 334513 with a small business size standard of 500 employees. However this requirement is unrestricted and all interested Contractors may submit a quote. *** ***The National Institute of Standards and Technology (NIST) has a requirement for Balances to be used in the Weights and Measures Division at NIST, Gaithersburg, MD. *** The Contractor shall provide a quote for the following line item(s): Line Item 0001: Three (3) Each, Balance Type 1 The Contractor shall meet or exceed the following required specifications: Measuring Range (approximate): 0 ? 200g, single range Taring range: Full measuring range Readability: 0.01 mg, fixed Repeatability: 0.015 mg Maximum non-linearity error: 0.1 mg Settling time: less than 8 sec Balance must be equipped with an RS-232 or USB 2.0 computer interface to permit remote reading of the balance indications. Balance pan surface must be capable of securely supporting typical mass artifacts within the measuring range, and must have additional provision for securely supporting a sensitivity weight with any artifact within the measuring range. Each balance shall be provided with three 200 g stainless steel mass artifacts; one complying with OIML R111 Class F1, one complying with OIML R111 Class F2 and one complying with NIST HB105-1, Class F. Line Item 0002: One (1) Each, Balance Type 2 The Contractor shall meet or exceed the following required specifications: Measuring Range (approximate): 0 ? 30g, single range Taring range: Full measuring range Readability: 0.001 mg, fixed Repeatability: 0.002 mg Maximum non-linearity error: 0.006 mg Settling time: less than 20 sec Balance must be equipped with an RS-232 or USB 2.0 computer interface to permit remote reading of the balance indications. Balance pan surface must be capable of securely supporting typical mass artifacts within the measuring range, and must have additional provision for securely supporting a sensitivity weight with any artifact within the measuring range. Each balance shall be provided with three 20 g mass artifacts; one complying with OIML R111 Class F1, one complying with OIML R111 Class F2 and one complying with NIST HB105-1, Class F. ****The Government will evaluate information based on the following evaluation criteria: 1) Technical Capability factor "Meeting or Exceeding the Requirement," 2) Past Performance, 3) Previous Experience, and 4) Price. Technical Capability, Past Performance, and Previous Experience, when combined, are equal to Price. Award shall be made on a best value basis. ****Evaluation of Technical Capability shall be based on the information provided in the quotation. Quotations shall include the make and model of the products, manufacturer sales literature or other product literature, which CLEARLY DOCUMENTS that the offered product(s) meet or exceed the specifications stated above. ****Past Performance will be evaluated to determine the overall quality of the product and service, provided by the Contractor. Evaluation of Past Performance shall be based on the references provided IAW FAR 52.212-1(b)(10) and/ or information provided by NIST or its? affiliates. Quoters shall provide a list of at least three (3) references to whom the same or similar products have been sold. The list of references shall include, at a minimum: The name of the reference contact person and the company or organization; the telephone number of the reference contact person; the contract or grant number; the amount of the contract and the address and the telephone number of the Contracting Officer if applicable; and the date of delivery or the date services were completed. ***Past Experience shall be evaluated to determine the extent of the Contractor's experience of at least five (5) years in and knowledge in providing similar balances. Evaluation of past experience may be based on contacts used for past performance; however, the vendor should provide additional references relating to its past experience information, if necessary. To allow assessment, each quote must include appropriate documentation. ***Delivery shall be FOB DESTINATION and be completed in accordance with the Contractor?s commercial schedule. *** ***The contractor shall pack and mark the shipment in conformance with carrier requirements, deliver the shipment in good order and condition to the point of delivery specified in the purchase order, be responsible for any loss of and/or damage to the goods occurring before receipt and acceptance of the shipment by the consignee at the delivery point specified in the purchase order; and pay all charges to the specified point of delivery. The contractor shall deliver all line items to NIST, Building 301, Shipping and Receiving, Gaithersburg, MD 20899-0001. *** The full text of a FAR provision or clause may be accessed electronically at http://acquisition.gov/comp/far/index.html. The following provisions apply to this acquisition: 52.212-1 Instructions to Offerors-Commercial Items; 52.212-3 Offerors Representations and Certifications- Commercial Items. Offerors must complete annual representations and certifications on-line at http://orca.bpn.gov in accordance with FAR 52.212-3 Offerors Representations and Certifications- Commercial Items. If paragraph (j) of the provision is applicable, a written submission is required. The following clauses apply to this acquisition: 52.204-7 Central Contractor Registration; 52.212-4 Contract Terms and Conditions?Commercial Items; 52.212-5 Contract Terms and Conditions Required to Implement Statutes or Executive Orders? Commercial Items including subparagraphs: 52.222-3, Convict Labor; 52.222-19, Child Labor ? Cooperation with Authorities And Remedies; 52.222-21, Prohibition of Segregated Facilities; 52-222-26, Equal Opportunity; 52.222-35, Equal Opportunity for Special Disabled Veterans; 52.222-36, Affirmative Action for Workers with Disabilities; 52.222-37, Employment Reports on Special Disabled Veterans; 52.225-3, Buy American Act - Free Trade Agreements - Israeli Trade Act w/ Alternate I; 52.225-13, Restriction on Certain Foreign Purchases; and 52.232-33, Payment by Electronic Funds Transfer-Central Contractor Registration. Department of Commerce Agency-Level Protest Procedures Level above the Contracting Officer is also incorporated. It can be downloaded at www.nist.gov/admin/od/contract/agency.htm. ***All vendors shall submit the following: 1) An original and one (1) copy of a quotation which addresses all Line Items; 2) Two (2) Originals of the Technical description and/or product literature; 3) Description of commercial warranty; and 4) One (1) copy of the most recent published price list. This is an Open-Market Combined Synopsis/Solicitation for equipment as defined herein. The Government intends to award a Purchase Order as a result of this Combined Synopsis/Solicitation that will include the terms and conditions that are set forth herein. In order to facilitate the award process, ALL quotes shall include a statement regarding the terms and conditions herein as follows: The Offeror shall state ?The terms and conditions in the solicitation are acceptable to be included in the award document without modification, deletion, or addition.? OR The Offeror shall state ?The terms and conditions in the solicitation are acceptable to be included in the award document with the exception, deletion, or addition of the following: Offeror shall list exception(s) and rationale for the exception(s) ***All quotes shall be received not later than 3:30:00 PM local time, on July 12, 2007 at the National Institute of Standards & Technology, Acquisition and Logistics Division, 100 Bureau Drive, Building 301, Room B129, Mail Stop 1640, Gaithersburg, MD 20899-1640, Attn: Jennifer Lohmeier. Because of heightened security, FED-EX, UPS, or similar delivery methods are the preferred method of delivery of quotes. If quotes are hand delivered, delivery shall be made on the actual due date through Gate A, and a 48 hour (excluding weekends and holidays) prior notice shall be made to the Contracts Office at 301-975-4959. NIST is not responsible for late delivery due to the added security measures. In addition, offerors/quoters who do not provide 24-hour notification in order to coordinate entrance to the NIST campus shall assume the risk of not being able to deliver offers/quotes on time. The Government is not responsible for the amount of time required to clear unannounced visitors, visitors without proper identification and without complete information that would allow delivery (i.e. point of contact, telephone POC, bldg., room number, etc.). If 24 hour notification was not provided, it is suggested your company representative or your courier service arrive at NIST at least 90 minutes prior to the closing time in order to process entry to the campus through the visitor center and complete delivery. Notice shall include the company name, name of the individual making the delivery, and the country of citizenship of the individual. For non-US citizens, the following additional information will be required: title, employer/sponsor, and address. Please ensure that the individual making the delivery brings photo identification, or they will be denied access to the facility. Faxed quotes will NOT be accepted. Emailed quotes will be accepted. ***
- Place of Performance
- Address: 100 Bureau Drive, Shipping & Receiving, Building 301, Gaithersburg, Maryland
- Zip Code: 20899-0001
- Country: UNITED STATES
- Zip Code: 20899-0001
- Record
- SN01328854-W 20070629/070627220418 (fbodaily.com)
- Source
-
FedBizOpps Link to This Notice
(may not be valid after Archive Date)
| FSG Index | This Issue's Index | Today's FBO Daily Index Page |