Loren Data's SAM Daily™

fbodaily.com
Home Today's SAM Search Archives Numbered Notes CBD Archives Subscribe
FBO DAILY ISSUE OF JUNE 30, 2007 FBO #2042
SPECIAL NOTICE

38 -- ROOF BOLTER

Notice Date
6/28/2007
 
Notice Type
Special Notice
 
NAICS
333131 — Mining Machinery and Equipment Manufacturing
 
Contracting Office
Department of Labor, Mine Safety and Health Administration, Acquisition Management Branch (WV), 1301 Airport Road, Beaver, WV, 25813-9426, UNITED STATES
 
ZIP Code
00000
 
Solicitation Number
Reference-Number-483-07MR-2547
 
Response Due
7/16/2007
 
Archive Date
7/31/2007
 
Small Business Set-Aside
Total Small Business
 
Description
THIS IS A COMBINDED SYNOPIS/SOLICITATION. MSHA IS SEEKING VENDORS THAT CAN PROVIDE THE BELOW REQUEST. PROPOSALS ARE DUE ELECTRONCIALLY BY 3:00 P.M. LOCAL TIME ON JULY 16, 2007. ALL QUESTIONS ARE DUE ELECTRONCIALLY BY 3:00 P.M. LOCAL TIME ON JULY 9, 2007. DESCRIPTION & DIMENSIONS Quantity: 1 Description: Electro-hydraulic, self propelled, arm feed, dual head roof control drill. Drillheads mounted on extending and swinging booms. Machine is designed for an average mining height less than 8?. Approximate Dimensions Length: 23? 8? Width: 9? 6? Chassis Height: 34? Underclearance: 9? Wheel Base: 73? Weight: 36,000 lbs. SPECIFICATIONS Chassis: Independent front and rear chassis lift - 7 degrees up, 3 degrees down Side entry tram deck located at left rear end of machine Four post manually adjustable tram deck canopy Tram enable control mounted in deck Chassis: 9? reach L TRS system with 9? to 11? manually adjustable beam Positioning and TRS controls at front left corner of chassis 1/4" thick bolt on cover plates with 1" fringe on chassis, 2" fringe on valve trays Ansul 20 lb. manually actuated dry chemical fire suppression system Zoned lubrication system Fletcher orange paint Three (one laminated, one paper and one cd) copies of parts & service manuals Drive System: Four wheel drive with 100/160 pitch chain, chain oilers, countershafts and mud relieved sprockets Tractor Steering, turns within length Staffa B-80 radial piston tram motors with high flow motion control valves M.S.H.A. approved braking system ? automatic spring set, hydraulic release disc brakes Tram speed: 0-1.5 mph 32" ? 14.5 x 15 STA foam filled tires Hydraulic System: Maximum working pressure: 3,500 psi 120 gallon drop in type hydraulic tank with breather Venturi and hand operated fill pump with spin-on filter Magnetic tank strainer and Pall high pressure filters SAE o-ring fittings in hydraulic components and control valves Manuli 3500 psi Rock Master hoses with JIC fittings 1" hoses on high flow circuit Two Parker P350-315 series, 31-9 gpm gear pumps Pressure gauge on each pump section, brakes and TRS accumulator Main relief valve Electrical System: M.S.H.A. approved 440 or 550 VAC (customer to specify) electrical system Two 50 HP, 60 Hz Reliance motors with quick change mounts located at rear of chassis Service Machine starter with Cutler Hammer magnetic line starter with trailing cable entrance gland and 12V tap Horizontal axis cable reel located in center of chassis 25? of #2-3 GGC round trailing cable Intrinsically safe, plug-in type strip stop switches at all control stations Intrinsically safe, plug-in type start switch located at tram and drill controls MCI fluorescent illumination system Dust System: M.S.H.A. certified, vacuum type system for hollow shaft drill steels Fletcher manual type dust collectors and auto dump dust pre-cleaners Belt driven Roots high performance blowers with a capacity of 62 cfm Vacuum at drill head: 15" of Hg Vacuum regulated by an adjustable relief valve mounted at blower in-take Drilling System: Arm feed drilling system with offset booms Feed length: 72" Boom extend: 18" Thrust: 0-10,000 lbs. Feed rate: 0-30 fpm Drill head separation: 4' minimum, 19? 6? maximum, 18' 4" straight line Fletcher deep chuck drill heads Torque: 0-300 ft. lbs. Rotation: 0-560 rpm Drilling controls located on outside of drill booms Joy stick drill feed and rotation controls with feed boost Adjustable bolt torquing circuit with thrust relief Feed package valve Driller canopies with side extension mounted on two stage square support posts with adjustable shims and pin thru cylinder rod.
 
Place of Performance
Address: NATIONAL MINE HEALTH AND SAFETY ACADEMY, MINE SAFETY AND HEALTH ADMINISTRATION, 1301 AIRPORT ROAD, BEAVER, WEST VIRGINIA
Zip Code: 25813
Country: UNITED STATES
 
Record
SN01330234-W 20070630/070628220827 (fbodaily.com)
 
Source
FedBizOpps Link to This Notice
(may not be valid after Archive Date)

FSG Index  |  This Issue's Index  |  Today's FBO Daily Index Page |
ECGrid: EDI VAN Interconnect ECGridOS: EDI Web Services Interconnect API Government Data Publications CBDDisk Subscribers
 Privacy Policy  Jenny in Wanderland!  © 1994-2024, Loren Data Corp.