SOLICITATION NOTICE
47 -- All Other Miscellaneous Fabricated Metal Product Manufacturing
- Notice Date
- 7/2/2007
- Notice Type
- Solicitation Notice
- NAICS
- 332996
— Fabricated Pipe and Pipe Fitting Manufacturing
- Contracting Office
- Defense Logistics Agency, Acquisition Management, Defense Supply Center Columbus BSM, P O Box 3990, Columbus, OH, 43216-5000, UNITED STATES
- ZIP Code
- 00000
- Solicitation Number
- SPM7M3-07-X-0042
- Response Due
- 7/16/2007
- Small Business Set-Aside
- Total Small Business
- Description
- NSN(s) 4730-00-221-2127 Estimated Yearly Quantity 11236 Unit of Issue: EA ITEM DESCRIPTION FOR PR: IQC07144009037 CAP, TUBE. MIL STD TITLED "FITTINGS, 37 DEGREE FLARED, FLUID CONNECTION", ALUMINUM ALLOY, 5/8 IN. O.D., 7/8 IN.-14UNJF-3B THDS. NAVY STANDARD DRAWING TOLERANCES; UNLESS OTHERWISE SPECIFIED, TOLERANCES FOR MACHINED DIMENSIONS SHALL BE AS FOLLOWS: UNDER SIX (6) INCHES DECIMAL: .XX + OR - .01 INCH. DECIMAL: .XXX + OR - .005 INCH. FRACTIONAL: + OR - 1/64 INCH. SIX (6) TO 24 INCH DECIMAL: .XX + OR - .02 INCH. DECIMAL: .XXX + OR - .010 INCH. FRACTIONAL: + OR - 1/32 INCH. 24 INCH AND OVER DECIMAL: .XX + OR - .03 INCH. DECIMAL: .XXX + OR - .015 INCH. FRACTIONAL: + OR - 1/16 INCH. ANGULAR (ALL): + OR - 0 DEGREES 30 MINUTES. TOLERANCE FOR CASTINGS DIMENSIONS SHALL BE AS FOLLOWS: UNDER TWO (2) INCH: +1/16 AND -1/16 INCH. TWO (2) TO FIVE (5) INCH: +3/32 AND -1/16 INCH. FIVE (5) TO EIGHT (8) INCH: +1/8 AND -3/32 INCH. EIGHT (8) TO 12 INCH: +3/16 AND -1/8 INCH. 12 TO 15 INCH: +1/4 AND -3/16 INCH. OVER 15 INCH: +1/4 AND -1/4 INCH. STAKING IS THE REQUIRED METHOD OF FASTENING THE NUT AND CAP TOGETHER. IF AQLS ARE LISTED IN THE SPECIFICATION(S)OR DRAWING(S) THEY MAY BE USED TO ESTABLISH THE AUTHORIZED SAMPLE SIZE, HOWEVER, THE ACCEPTANCE NUMBER FOR THIS CONTRACT IS ZERO; I.E., THIS CONTRACT REQUIRES A SAMPLING PLAN THAT ACCEPTS ON ZERO DEFECTS AND REJECTS ON ONE OR MORE DEFECT(S). CERTIFICATE OF QUALITY COMPLIANCE APPLIES - DLAD 52.246-9000. DLAD CLAUSE 52.246-9004, PRODUCT VERIFICATION TESTING, IS HEREBY INCORPORATED, AND MAY BE INVOKED AT THE DISCRETION OF THE PROCUREMENT ACTIVITY. CONTRACTOR/MANUFACTURER IS REQUIRED TO ESTABLISH AND MAINTAIN A CALIBRATION SYSTEM THAT MEETS THE REQUIREMENTS OF ANSI/NCSL Z540-1-1994, AMERICAN NATIONAL STANDARD FOR CALIBRATION - CALIBRATION LABORATIORIES AND MEASURING AND TEST EQUIPMENT - GENERAL REQUIREMENTS, OR ISO 10012-1, QUALITY ASSURANCE REQUIREMENTS FOR MEASURING EQUIPMENT - PART 1, METROLOGICAL CONFIRMATION SYSTEM FOR MEASURING EQUIPMENT. "CLASS I OZONE DEPLETING CHEMICALS ARE NOT TO BE USED NOR INCORPORATED IN ANY ITEMS TO BE DELIVERED UNDER THIS CONTRACT. THIS PROHIBITION SUPERSEDES ALL SPECIFICATION REQUIREMENTS BUT DOES NOT ALLEVIATE ANY PRODUCT REQUIREMENTS. SUBSTITUTE CHEMICALS MUST BE SUBMITTED FOR APPROVAL UNLESS THEY ARE AUTHORIZED BY THE SPECIFICATION REQUIREMENTS." REFERENCED SPECIFICATION AS4842 (MIL-F-5509)-IF ANA BULLETIN NO. 431 IS USED TO CLASSIFY NOTED DEFECTS, IT IS NOT TO BE INTERPRETED AS ALLOWING NONCONFORMING PARTS TO BE SUBMITTED FOR ACCEPTANCE WITHOUT PRIOR WRITTEN APPROVAL OF THE PROCURING ACTIVITY. THIS IS A PERFORMANCE REVIEW INSTITUTE (PRI) QML OR QPL ITEM. PRIOR TO AWARD, THE BUYER SHALL OBTAIN A DATED COPY OF THE CURRENT PRI QML OR QPL FOR FILING IN THE ELECTRONIC CONTRACT FILE(ECF). THE PRI QML OR QPL IS AVAILABLE FROM WWW.EAUDITNET.COM . CRITICAL APPLICATION ITEM I/A/W AN929 REV 11 BASIC AMEND NR 11 TYPE NUMBER PART NO.AN929-10 I/A/W SAE AS4841 REFNO AMEND NR TYPE NUMBER All responsible sources may submit an offer/quote which shall be considered. The subject requirement is for acquisition of 1 NSN for the various end items. This proposed procurement includes an item within the Federal Supply Class 4730. See Note(s): 1, 9 and 26. The requirement will result in an award of an Indefinite Delivery Purchase Order Contract for which delivery orders may be placed for five (5) years. The solicitation will be available in FedBizOpps on 2 July 2007 at https://www.dibbs.bsm.dla.mil/RFP/. The scope of this contract includes the acquisition of a 1/T coded item This AMSC code implies the item is QML/QPL item and may only be procured from QPL certified sources or distributors of QPL certified sources. The delivery for this acquisition will be on an FOB Destination basis. The inspection/acceptance is at destination. The proposed procurement contains an option to extend the contract period four times at the discretion of the Government. The total duration (base plus option years) shall not exceed 5 years. The final award decision will be based upon evaluation of price, delivery, and past performance. This acquisition is a 100% Small Business Set Aside.
- Record
- SN01332625-W 20070704/070702220127 (fbodaily.com)
- Source
-
FedBizOpps Link to This Notice
(may not be valid after Archive Date)
| FSG Index | This Issue's Index | Today's FBO Daily Index Page |