SPECIAL NOTICE
51 -- RFQ-5130-01-508-1221
- Notice Date
- 7/3/2007
- Notice Type
- Special Notice
- NAICS
- 332212
— Hand and Edge Tool Manufacturing
- Contracting Office
- General Services Administration, Federal Supply Service (FSS), GSA, FSS, Heartland Region (6FC and 6FL), 1500 East Bannister Road, Kansas City, MO, 64131, UNITED STATES
- ZIP Code
- 00000
- Solicitation Number
- RFQ-B7-5130-01-508-1221
- Response Due
- 7/12/2007
- Archive Date
- 7/27/2007
- Description
- DATE: 7-3-07 ATTENTION: REQUEST FOR QUOTES FROM: COMPANY: PLEASE RESPOND BY: 4:00 PM CDT 7-12-07 UNITED STATES OF AMERICA FOR INFORMATION CONTACT: WILLIAM T. YEAGER PHONE: (816)-823-1720 FAX: (816)-823-3109 OR (816)- 926-3678 EMAIL: WILLIAM.YEAGER@GSA.GOV GSA, FSS, HEARTLAND GLOBAL SUPPLY STOCK & SPECIAL ORDER ACQUISITION DIV. (6FEP) 1500 E. BANNISTER ROAD, BLDG 6 KANSAS CITY, MO 64131 REQUEST FOR QUOTATIONS ? THIS IS NOT AN ORDER IMPORTANT: THIS IS A REQUEST FOR QUOTATIONS, AND QUOTATIONS FURNISHED ARE NOT OFFERS. THIS REQUEST DOES NOT COMMIT THE GOVERNMENT TO PAY ANY COSTS INCURRED IN THE PREPARATION OF THE SUBMISSION OF THIS QUOTATION, OR TO CONTRACT FOR SUPPLIES OR SERVICES. THIS SECTION MUST BE COMPLETED COMPANY NAME & ADDRESS:_______________________________________________________________ LEAD TIME_______ DARO QUOTE VALID FOR___________________ FOB POINT:_____________________ DUN & BRADSTREET NO. SEE ATTACHED FOR COMPLETE ITEM DESCRIPTON ** NSN NO. OF ORDERS QUANTITIES UNIT PRICE MINIMUM ORDER 5130-01-508-1221 1 41 /EA EFFECTIVE OCTOBER 1, 2003 ALL VENDORS SEEKING TO DO BUSINESS WITH THE FEDERAL GOVERNMENT ARE REQUIRED TO REGISTER WITH THE CENTRAL CONTRACT REGISTRATION AT WWW.CCR.GOV. IF YOU ARE NOT REGISTERED AND ARE NOT WILLING TO REGISTER WE WILL NOT BE ABLE MAKE AN AWARD TO YOUR FIRM. PLEASE DO NOT RETURN COPIES OF ITEM DESCRIPTIONS WITH RFQ. 5130-01-508-1221 UI: EA SCREWDRIVER, BATTERY POWERED DESCRIPTION Electric Screwdriver, Cordless This technical description covers Direct Current (DC) brushless motor (for spark limiting), single speed with soft start, reversible, hex drive, battery powered screwdrivers with torque adjustment used for general maintenance and construction. The screwdrivers spark limiting feature enables its use in Underwriters Laboratories (UL) 1604 defined Class I Division 2 Hazardous (Classified) Locations for maximum 50 degrees C ambient. Material - All materials used in the fabrication of the battery operated screwdrivers shall be new and of the quality necessary to produce battery powered screwdrivers to meet the requirements specified herein. Design - All parts of the battery powered screwdriver shall be designed and constructed to the requirements listed herein. All parts subject to wear shall be easily accessible for adjustment, replacement, or repair. Safety - The battery powered screwdriver shall provide safe and convenient operation when used in accordance with its intended design. However, the tool may involve use with hazardous materials, operations, and equipment. It is the responsibility of the user of this tool to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to its use. Users are cautioned to read all manufacturer's instructions prior to using the tool. In addition, the power screwdriver shall comply with the following safety requirements: Electrical components and motor shall be completely enclosed except for ventilation openings conforming to UL45, UL745 and UL6075. The tool shall be marked with a signal word "DANGER" followed by "This tool should only be used as a screwdriver. The use of this tool in any other way may result in the ignition of a flammable atmosphere." Interchangeability - All parts having the same manufacturer's number shall be manufactured to such standards that will permit replacement or adjustment without modification of the battery powered screwdriver or its parts. Construction - The battery powered screwdriver shall be completed so that when connected to the battery power source it can be used for its designed operation. Construction shall be free of any characteristics or defects that will prevent the screwdriver from passing any of the test specified herein this technical description. The battery powered screwdriver shall conform to the following design and performance requirements: Voltage - 12 Volts DC Motor - 12 VDC Brushless Drive Size - 1/4 inch Hexagon Drive Type - Quick Release Maximum No Load Speed - 400 RPM nominal Fastening Torque Range: 7 to 40 inch-lbs Torque Settings - Adjustable throughout full torque range in increments no greater than 1 inch-lb Drive Style - Straight Handle Design - Pistol Grip Length (with battery pack) - 7.5 inches maximum Weight with battery pack - 4.1 lbs maximum Rated for use in Class I Division 2 locations for maximum 50 degrees C. Power Actuation Switch - The switch shall allow for operation in both forward and reverse directions. A safety setting to lock the switch in the off position to prevent accidental starts shall be provided. The switch shall be provided with an interlocking means that will prevent the switch from actuating the motor while the battery is being installed or removed from the tool. Clutch - The tool shall be provided with a clutch that can be adjusted throughout the full torque range in increments no greater than 1 inch-lb. The torque output at any given setting shall have a repeatability tolerance of +/-10% at +/-3 sigma. The clutch shall be provided with a device that automatically turns the tool off once the desired torque is reached while tightening the fastener. In addition the tool shall remain in the off position once the desired torque is reached for a minimum 0.5 seconds even if the power actuation switch is operated. Lubrication - The screwdrivers shall be pre-lubricated by the manufacturer so that the bearings and gears will be constantly lubricated when in operation. Bearings and gears that require subsequent lubrication shall be arranged so that the proper lubricant can be applied. Pressure lubricant fittings shall not be used. The gear housing shall be enclosed to prevent any leakage of the lubricant. Accessories - The screwdriver shall include the following accessories: Batteries - The screwdriver shall include two batteries each rated 1.7 ampere-hours minimum. The battery pack shall be removable from the power driver for recharging. Each battery shall be capable of being fully discharged and recharged a minimum of 400 times. In addition a locking mechanism to prevent accidental disengagement of the battery pack shall be provided. Each battery shall also be provided with an interlocking means that will prevent the power actuation switch from operating the motor while the battery is being installed or removed from the tool Charging Unit - The screwdriver shall be provided with one charging unit that shall comply with UL1012 or UL1310 as applicable. The charging unit shall include a light indicating a fully charged condition. The charger shall be capable of fully charging the battery pack in accordance with the manufacturer's instructions. Operating instructions and carrying case - The screwdriver shall be provided with one copy of the manufacturer's standard operating and maintenance instructions along with a sturdy metal or plastic carrying case, compartmentalized to prevent damage to the screwdriver and its components. Weight measurements shall include the screwdriver and battery pack. Workmanship - All items specified herein this technical description shall be the manufacturer's standard product (prior to EMI or Moisture Protection when required). All component surfaces (includes housing, castings, forgings, and molded parts) shall be without flashing or other defects that will cause injury or adversely affect serviceability or durability. External surfaces shall be smooth and all edges shall be rounded or beveled. Surfaces shall be finished according to the manufacturer's standard practice. Markings - The battery powered screwdriver and charger shall be provided with a National Recognized Testing Laboratory (NRTL) mark for the UL standards: UL45, UL745, or UL60745. In addition the tool shall be marked Class I Division 2 and with the signal word "DANGER" followed by "This tool should only be used as a screwdriver. The use of this tool in any other way may result in the ignition of a flammable atmosphere." Test Requirements: Qualification - To qualify the design and processes a sample screwdriver shall be subjected to all requirements contained herein this technical description, including all tests contained in the referenced UL standards. The manufacturer shall maintain a record of compliance, with actual test data, for all units qualified. The manufacturer shall also perform testing to verify compliance with ratings and capacities listed herein this technical description and in catalog data sheets. A re-qualification shall be required whenever a change in esign or manufacture affects qualification results. Acceptance: The battery powered screwdrivers shall be operationally checked for all functional characteristics including operation of the forward/reverse switch, trigger and locking mechanism, clutch mechanism, battery engagement and retention, battery and power actuation interlock system, and charger operation and weight. The charging units shall be tested in accordance with UL1012 or UL1310. Process Requirements - The manufacturing processes shall be monitored periodically to assure compliance with the following: Torque - The torque output at any given setting shall have a repeatability tolerance of +/- 10% at 3 sigma. The screwdriver shall also provide a fastening torque range from 7 to 40 inch-pounds. The clutch used for various torque settings, shall be provided with a device that automatically turns the tool off once the desired torque is reached while tightening the fastener. In addition the tool shall remain in the off position once the desired torque is reached for a minimum 0.5 seconds even if the power actuation switch is operated. Offering on: Manufacturer's Name: __________________________ Brand___________________________________ Model or Part No. __________________________________ ITEM MARKING Mark each item in a permanent and legible manner with manufacturer's part number and name or identifying symbol. PACKAGING Packaging in accordance with standard commercial practice. PACKING The unit packages shall be packed in a close fitting fiberboard box in compliance with the Uniform Freight Classification and the National Motor Freight Classification requirements of Rules, Item 222, Sec. 3., Minimum 200, or ECT 32. MARKING All unit, intermediate, transport packages and unit loads shall be marked and bar coded for delivery to civilian activities in accordance with the latest version of FED-STD-123, "Marking For Shipment (Civil Agencies)", or marked and bar coded for delivery to military activities in accordance with the latest version of MIL-STD-129, "Military Marking For Shipment and Storage". "Latest version" is defined as the version in effect on the date of bid submittal. Federal Standards and Military Standards can be accessed on-line via the Defense Logistics Agency's "Assist" Quicksearch web site: http://assist.daps.dla.mil/quicksearch/.
- Record
- SN01334398-W 20070705/070703222004 (fbodaily.com)
- Source
-
FedBizOpps Link to This Notice
(may not be valid after Archive Date)
| FSG Index | This Issue's Index | Today's FBO Daily Index Page |