SOLICITATION NOTICE
34 -- LATHE
- Notice Date
- 7/5/2007
- Notice Type
- Solicitation Notice
- Contracting Office
- N00164 300 Highway 361, Building 64 Crane, IN
- ZIP Code
- 00000
- Solicitation Number
- N0016407T0267
- Response Due
- 7/13/2007
- Archive Date
- 8/12/2007
- Description
- This solicitation is being posted to both the Federal Business Opportunities (FBO) page located at http://www.fbo.gov and the Navy Electronic Commerce on Line (NECO) site located at https://www.neco.navy.mil/ While it is understood that FBO is the single point of entry for posting of synopsis and solicitations to the internet, NECO is the alternative in case FBO is unavailable. Please feel free to use either site to access information posted by NSWC Crane. This solicitation is being issued pursuant to the procedures at FAR 13. Synopsis exception FAR 5.202(a)(13) applies and Solicitation Number N00164-07-T-0267 http://www.crane.navy.mil/acquisition/synopcom.htm is hereby issued as an attachment hereto. This procurement is for the purchase of a Tool room lathe as described in this solicitation: MACHINE REQUIREMENTS: CNC/MANUAL TOOLROOM LATHE; 16? (405MM) X 48? (1219MM), 16? (406MM) SWING, 12HP (8.9KW) 2,000RPM, A2-6 SPINDLE, LCD DISPLAY, NO WORKINGHOLDER, TOOLPOST, OR TOOLHOLDERS. THREE INCH DIAMETER SPINDLE BORE. SHALL BE ABLE TO OPERATE IN FOUR MODES: MANUAL, SEMI AUTOMATIC, AUTOMATIC, OR FULL CNC. LATHE DESIGN SHALL NOT BE FULLY ENCLOSED, ALLOWING CLOSER AND GREATER ACCESS TO THE WORK PIECE. OPERATES ON SINGLE OR THREE-PHASE POWER, INCLUDES VISUAL QUICK CODE, INTUITIVE PROGRAMING SYSTEM, 1MB, AND 6 MONTH WARRANTY. OPTIONS REQUIRED: COOLANT PUM FOR TOOLROOM LATHES. M-CODE OR KEYPAD ACTIVATED. 1/8HP PUMP WITH 5 GALLON TANK. INCLUDES SINGLE LOCK-LINE HOES & SHUT OFF VALVE. HARD DISK DRIVE (40GB), USB SUPPORT FOR ZIP DRIVE OR FLASH MEMORY DEVICE, FLOPPY DRIVE AND ETHERNET INTERFACE. COMPATIBLE WITH WINDOWS 95, 98, ME, 2000, AND XP. ALSO WORKS WITH SERVER VERSIONS NT 4.0, 2000, AND 2003. 10? 3-JAW ZERO SET SCROLL CHUCK FOR TL-2 WITH HARD TOP REVERSIBLE JAWS, A2-6 MOUNT. MANUAL STEADY REST FOR TL-2. MANUAL POSITIONING AND GRIPPER ADJUSTMENT FOR UP TO 5? DIAMETER SHAFTS. THREE POINT CONTACT ROLLERS WITH OPEN C-FRAME. MANUAL TAILSTOCK FOR TL-2 INCLUDES PLATFORM WITH 48? TRAVEL (121.9CM) AND QUILL SECTION WITH MT4 & LOCKING HANDLE FOR MANUAL THRUST. RIGID TAPPING SPINDLE ORIENTATION WORK LIGHT FOR THE TOOLROOM LATHE, 110-VOLT WALL OUTLET. AUTO BLOW GUN WITH COILED HOSE & BRACKET TOOLING REQUIRED: 1.0? ID BORING BAR HOLDER FOR TOOL TURRET ON THE TL-1 AND TL-2 WITH TT1 OR TT2 OPTION. QUICK CHANGE TOOL POST WITH 2 TOOL POSITIONS AT 90 DEGREES APART, CAM LOCK SYSTEM, 4ea. ?? TURN/FACE, 1ea. 1? BORING BAR TOOL HOLDER, AND T-NUT FOR TL-2 FOUR (4) STATION AUTOMATIC TOOL TURRET THAT TAKES ?? STICK TOOLS FOR TL-2 ONLY. INCLUDES 1 ? 1? BORING BAR HOLDER. EXTENDED SIX (6) MONTH WARRANTY SHALL INCLUDE PARTS & LABOR AND 4 HOURS ON SITE TRAINING AT INSTALLATION. All changes to the requirement that occur prior to the closing date will be posted to Crane web site, FedBizOpps and NECO. It is the responsibility of interested vendors to monitor the Crane web site, FedBizOpps and/or NECO for amendments that may be issued to this solicitation. For changes made after the closing date, only those offerors that provide a proposal will be provided any changes/amendments and considered for future discussions and/or award. Offers may be faxed to Janice Aikman, FAX 812-854-3465 or e-mailed to janice.aikman@navy.mil. All required information must be received on or before July 13, 2007 at 12:00 pm (CDT) local time.
- Web Link
-
TO DOWNLOAD SYNOPSIS/SOLICITATION
(http://www.crane.navy.mil/acquisition/synopcom.htm)
- Record
- SN01335396-W 20070707/070705221443 (fbodaily.com)
- Source
-
FedBizOpps Link to This Notice
(may not be valid after Archive Date)
| FSG Index | This Issue's Index | Today's FBO Daily Index Page |