SOURCES SOUGHT
81 -- Weather System Shipping Cases
- Notice Date
- 7/31/2007
- Notice Type
- Sources Sought
- NAICS
- 332439
— Other Metal Container Manufacturing
- Contracting Office
- Department of the Air Force, Air Combat Command, ACC CONS, 11817 Canon Blvd, Newport News, VA, 23606-4516, UNITED STATES
- ZIP Code
- 00000
- Solicitation Number
- FA4890-07-cases
- Response Due
- 8/6/2007
- Archive Date
- 8/21/2007
- Description
- This is an announcement to seek capable vendors to supply seven (7) custom designed STANEX or equal aluminum transit cases to transport weather equipment. The vendor must be capable of constructing the cases in accordance with the below stated dimensions and characteristics. STANEX OR EQUAL ALUMINUM TRANSIT CASE Manufactured from 0.048in (1.2mm) thick aluminum alloy for strength and light weight Spray water protected One (1) hinged cover Three (3) stirrup latches Eight (8) spring loaded handles with auto stop at 90 degrees (two each side of case) Galvanized steel corners for positive stacking provisions and enhanced strength [Four (4) on case cover, four (4) on case bottom] Case cover and case bottom with embossed ribs for rugged strength One set of wheels (75kg) One custom polyethylene foam case insert, Black, 1.7# density, with 1.0in (25.4mm) thick foam on cover DIMENSIONS Internal dimensions: 49.0 x 34.0 x 23.0in (1245 x 864 x 584mm) Clearance: 47.4 x 32.4in (1205 x 824mm) External dimensions: 50.4 x 35.4 x 24.4in (1280 x 899 x 621mm) Weight (without foam): 47.0 pounds (21.4 kg) FINISH Outside surfaces of case only, painted Tan (per MIL-STD-595b color number 33446) Polyurethane Silk screen in 1in lettering, Arial font with MIL-STD 50-710R Matte Black Ink, located at upper right corner of the front of the case STANEX OR EQUAL ALUMINUM TRANSIT CASE Manufactured from 0.048in (1.2mm) thick aluminum alloy for strength and light weight Spray water protected One (1) hinged cover with sealing gasket Two (2) stirrup latches Four (4) spring loaded handles with auto stop at 90 degrees (two each length side of case) Galvanized steel corners for positive stacking provisions and enhanced strength [Four (4) on case cover, four (4) on case bottom] Case cover and case bottom without embossed ribs for rugged strength One custom polyethylene foam case insert, Black, 1.7# density, with 1.0in (25.4mm) thick foam on cover DIMENSIONS Internal dimensions: 31.0 x 15 x 18? (788 x 381 x 457mm) Clearance: 29.4 x 13.4in (748 x 341mm) External dimensions: 32.4 x 16.4 x 19.4? (823 x 416 x 494mm) Weight (without foam): 20 pounds (9.1 kg) FINISH Outside surfaces of case only, painted Tan (per MIL-STD-595b color number 33446) Polyurethane Silk screen in 1in lettering, Arial font with MIL-STD 50-710R Matte Black Ink, located at upper right corner of the front of the case. Interested persons may identify their interest and capability to respond to the requirement via email to angela.toler.ctr@langley.af.mil or karen.duncan@langley.af.mil. Telephone requests will not be honored. A determination by the government to compete this proposed action based upon responses to this notice is solely within the discretion of the government. Information received will normally be considered solely for the purpose of determining capable vendors.
- Place of Performance
- Address: Air Combat Weather Division, ACC/A3W, 205 Dodd Street, Suite 101, Langley AFB, VA
- Zip Code: 23665
- Country: UNITED STATES
- Zip Code: 23665
- Record
- SN01357383-W 20070802/070731220957 (fbodaily.com)
- Source
-
FedBizOpps Link to This Notice
(may not be valid after Archive Date)
| FSG Index | This Issue's Index | Today's FBO Daily Index Page |