SOLICITATION NOTICE
65 -- One (1) Steiner Tranoral Laser Set with assortedaccessories
- Notice Date
- 8/2/2007
- Notice Type
- Solicitation Notice
- NAICS
- 339112
— Surgical and Medical Instrument Manufacturing
- Contracting Office
- Department of Veterans Affairs;Rocky Mountain Network;VISN 19 Contracting;4100 E. Mississippi Avenue, Suite 1110;Glendale CO 80246
- ZIP Code
- 80246
- Solicitation Number
- VA-259-07-RQ-0211
- Response Due
- 8/9/2007
- Archive Date
- 8/19/2007
- Small Business Set-Aside
- N/A
- Description
- This is a combined synopsis/solicitation for commercial items prepared in accordance with subparts in the Federal Acquisition regulation 12.6, as supplemented with additional information included in this notice. This announcement constitutes the only solicitation; quotations are being requested and a written solicitation will not be issued. VA Rocky Mountain Network VISN 19 Contracting intends to negotiate a commercial item (FAR Part 12) contract to purchase, for Eastern Colorado Health Care System, Denver Facility, 1055 Clermont Street, Denver, CO 80220: One (1) Steiner Tranoral Laser Set with assorted accessories. The following is a listing of all the items being solicited and their individual attributes: This requirement is to provide all the equipment identified as the following: 8661AN - Steiner Distending Operating Laryngoscope for adults, lightweight. For laser, Length: 18cm - 1 each 8666DN - Steiner Distending Oropharyngoscope for adults, lightweight. For laser, Length: 14cm - 1 each 8661CN - Steiner Laryngoscope with integrated channel, Med/Lg, Prox OD: 26 x18 mm, Length: 18cm - 1 each 8661DN - Steiner Laryngoscope with integrated channel, Small, Prox OD: 23 x115 mm, Length: 19cm - 1 each 8661EN - Steiner Operating Laryngoscope with antiflex coating for laser treatment - 1 each 497AC - Benjamin-Havas Clip for prox illumination - 1 each 8575K - Goettingen model Laryngoscope holder with wide angle adjustment, Ring 9 cm - 1 each 8662D - Laryngoforce grasping forceps, delicate serrated jaws, WL: 22 cm - 1 ea 8662E - Laryngoforce grasping forceps, small with oval alligator jaws, WL: 22 cm - 1 ea 8662EL - Laryngoforce grasping forceps, small with suction, oval alligator jaws, WL: 22 cm - 1 ea 8662FL - Laryngoforce grasping forceps, medium with suction, oval alligator jaws, WL: 22 cm - 1 ea 8662GL - Laryngoforce grasping forceps, large with suction, oval fenestrated alligator jaws, WL:22 cm - 1 each 8596R - Rudert Protector, oval, curved up with suction channel, 7 mm x 23 cm - 1 each 8606D - Steiner monopolar suction/coag tube with ergonomic handle, 2 mm x 23 cm - 1 each 8606E - Steiner monopolar suction/coag tube with ergonomic handle, 2.5 mm x 23 cm - 1 each 8606F - Steiner monopolar suction/coag tube with ergonomic handle, 3.5 mm x 23 cm - 1 each 26005M - Monopolar high frequency cord with 4 mm plug for storz/erbe icc es units, 300 cm - 1 each 8593GM - Laryngeal mini grasp forceps, curved up right with triangular fenestrated jaws WL: 23 cm - 1 each 8593HM - Laryngeal mini grasp forceps, curved up left with triangular fenestrated jaws WL: 23 cm - 1 each 8662G - Laryngoforce grasping forceps, large, oval fenestrated alligator jaws, WL: 22 cm - 1 ea 8662HL - Laryngoforce grasping forceps, XLarge with suction, with triangular fenestrated jaws, WL: 22 cm - 1 each 8663BH - Grasping forceps with insulated sheath curved right, serrated jaws, WL: 23 cm - 1 each 8663CH - Grasping forceps with insulated sheath curved left, serrated jaws, WL: 23 cm - 1 each 8665L - Steiner clip forceps, jaws curved left WL: 22 cm, for Eticon LT100 Ligaclip extra - 1 each 8665R - Steiner clip forceps, jaws curved right WL: 22 cm, for Eticon LT100 Ligaclip extra - 1 each 39731B - Aluminum sterilize tray, for Steiner laser-laryngoscopy instruments, 20" x 9.7" x 7.9" - 1 each 20200060L - Leica microscope beam-splitter adaptor - 1 each 20200050 - Accubeam microscope video adapter - 1 each 20210051 - F65 single-chip camera magnification lens for zeiss/leica microscopes - 1 each 2010TTI - C-mount eyepiece adapter for operating microscopes - 1 each Warranty should cover manufacturers defect for a period of at least one year. BID ON BRAND NAME OR EQUAL, if bidding on an equal, offeror must note that the item is an equal. If bidding on an equal item, offeror must submit full descriptive literature and be prepared to demonstrate their system at the VA in Denver, Colorado NLT August 9, 2007. SHIPPING/DELIVERY/UNLOADING PACKAGE (to be included in quoted price) Delivery and installation must be done on or before September 14, 2007. Standard warranty. FOB destination. Offerors must hold prices firm in its offer for 60 calendar days from the date specified for receipt. Clauses & Provisions. This solicitation document and incorporated provisions and clauses are those in effect through Federal Acquisition Circular 2005-11. Contract clauses and provisions cited in this solicitation may be accessed electronically at these addresses: http://www.arnet.gov/far/ and http://www.va.gov/oamm/acquisitions/ars/policyreg/vaar/vaar852.htm Incorporated herein by reference are the following Federal Acquisition Regulation (FAR) Clauses & Provisions: 52.212-1: Instructions to Offerors - Commercial Items (JAN 2006); 52.212-3: Offeror Representations and Certifications - Commercial Items (NOV 2006); 52.212-4: Contract Terms and Conditions - Commercial Items (FEB 2007); 52.212-5: Contract Terms and Conditions Required to Implement Statutes or Executive Orders- Commercial Items (MAR 2007) [(b)(14), (15), (16), (17), (18), (19), (20), (24), (26), and (32)]; 52.233-1: Disputes (JUL 2002); 52.233-2: Service of Protest (SEP 2006): [Rocky Mountain Network VISN 19 Contracting, 4100 E. Mississippi Avenue, Suite 1110, Glendale, CO 80246]. Incorporated herein are the following VA Acquisition Regulation (VAAR) Clauses & Provisions: 852.211-70: Service Data Manual (NOV 1984). The contractor agrees to furnish two copies of a manual, handbook or brochure containing operating, installation, and maintenance instructions (including pictures or illustrations, schematics, and complete repair/test guides as necessary). Where applicable, it will include electrical data and connection diagrams for all utilities. The instructions shall also contain a complete list of all replaceable parts showing part number, name, and quantity required. 852.211-71: Guarantee (NOV 1984). The contractor guarantees the equipment against defective material, workmanship and performance for a period of said guarantee to run from date of acceptance of the equipment by the Government. The contractor agrees to furnish, without cost to the Government, replacement of all parts and material which are found to be defective during the guarantee period. Replacement of material and parts will be furnished to the Government at the point of installation, if installation is within the continental United States, or f.o.b. the continental U.S. port to be designated by the contracting officer if installation is outside of the continental United States. Cost of installation of replacement material and parts shall be borne by the contractor. 852.211-77: Brand Name or Equal (NOV 1984) . (Note: as used in this clause, the term "brand name" includes identification of products by make and model.) (a) If items called for by this invitation for bids have been identified in the schedule by a "brand name or equal" description, such identification is intended to be descriptive, but not restrictive, and is to indicate the quality and characteristics of products that will be satisfactory. Bids offering "equal" products (including products of the brand name manufacturer other than the one described by brand name) will be considered for award if such products are clearly identified in the bids and are determined by the Government to meet fully the salient characteristics requirements listed in the invitation. (b) Unless the bidder clearly indicates in his bid that he is offering an "equal" product, his bid shall be considered as offering a brand name product referenced in the invitation for bids. (c) (1) If the bidder proposes to furnish an "equal" product, the brand name, if any, of the product to be furnished shall be inserted in the space provided in the Invitation or Bids, or such product shall be otherwise clearly identified in the bid. The evaluation of bids and the determination as to equality of the product offered shall be the responsibility of the Government and will be based on information furnished by the bidder or identified in his/her bid as well as other information reasonably available to the purchasing activity. CAUTION TO BIDDERS. The purchasing activity is not responsible for locating or securing any information which is not identified in the bid and reasonably available to the purchasing activity. Accordingly, to insure that sufficient information is available, the bidder must furnish as a part of his/her bid all descriptive material (such as cuts, illustrations, drawings or other information) necessary for the purchasing activity to: (i) Determine whether the product offered meets the salient characteristics requirement of the Invitation for Bids, and (ii) Establish exactly what the bidder proposes to furnish and what the Government would be binding itself to purchase by making an award. The information furnished may include specific references to information previously furnished or to information otherwise available to the purchasing activity. (2) If the bidder proposes to modify a product so as to make it conform to the requirements of the Invitation for Bids, he/she shall: (i) Include in his/her bid a clear description of such proposed modifications, and (ii) Clearly mark any descriptive material to show the proposed modifications. (3) Modifications proposed after bid opening to make a product conform to a brand name product referenced in the Invitation for Bids will not be considered. 852.270-4: Commercial Advertising (NOV 1984). The bidder or offeror agrees that if a contract is awarded to him/her, as a result of this solicitation, he/she will not advertise the award of the contract in his/her commercial advertising in such a manner as to state or imply that the Department of Veterans Affairs endorses a product, project or commercial line of endeavor. Instructions, Conditions and Notices to Offerors - Offeror shall provide (1) specifications for equipment offered; (2) a quotation for offered equipment, in the form of Unit Price and Extended Price for number of units specified in paragraph 2 above; and (3) all information in accordance with the format specified in FAR 52.212-1, "Instructions to Offerors - Commercial Items" paragraph "b", and FAR 52.212-3, "Offeror Representations and Certifications - Commercial Items" prior to the time specified in paragraph 5 below in order to be considered for award. Address offers to: Aeonard R. Borel, Contracting Officer, Rocky Mountain Network VISN 19, 4100 E. Mississippi Avenue, Suite 1110, Glendale, CO 80246. E-mail to aeonard.borel@va.gov. Quotations are due by 4:00 p.m. Mountain time on August 6, 2007. Award of a firm-fixed price contract shall be made to the responsive, responsible offeror based on capability to meet the qualitative and timeliness (delivery) standards specified herein, at price most advantageous to the Government. Payment shall be made by electronic funds transfer (EFT). For implementing EFT payments, please contact your financial institution for assistance in completion of the Payment Information Form - SF 3881 for submission to the VA Finance Center in Austin, Texas upon contract award. Contact Aeonard R. Borel at (303) 504-2692 regarding this solicitation.
- Place of Performance
- Address: Denver VA Medical Center;1055 Cleremont Street;Denver Colorado
- Zip Code: 80220
- Country: USA
- Zip Code: 80220
- Record
- SN01360166-W 20070804/070802220938 (fbodaily.com)
- Source
-
FedBizOpps Link to This Notice
(may not be valid after Archive Date)
| FSG Index | This Issue's Index | Today's FBO Daily Index Page |