MODIFICATION
T -- PR200707030010 Birch Bayh
- Notice Date
- 8/9/2007
- Notice Type
- Modification
- NAICS
- 541370
— Surveying and Mapping (except Geophysical) Services
- Contracting Office
- General Services Administration, Public Buildings Service (PBS), Physical Capital Asset Management Division (PGE), 1800 F Street, NW, Room 4302, Washington, DC, 20405, UNITED STATES
- ZIP Code
- 20405
- Solicitation Number
- PR200707030010
- Response Due
- 9/4/2007
- Archive Date
- 9/19/2007
- Point of Contact
- Steve Cox, Contract Specialist, Phone 202-501-0543, Fax 202-208-1741, - Demetria Brown, contract specialist, Phone 202-208-3201, Fax 202-208-7413,
- E-Mail Address
-
steven.cox@gsa.gov, Demetria.Brown@gsa.gov
- Description
- FOR A COMPLETE COPY OF THE FILE IN WORD OR PDF FORMAT, PLEASE SEND AN E-MAIL TO: STEVEN.COX@GSA.GOV Birch Bayh Courthouse Scope of Work (SOW) for 3D-4D-BIM Services U.S. General Services Administration Public Buildings Service Office of the Chief Architect National 3D-4D-BIM Program PROGRAM INFORMATION AND PROJECT DESCRIPTION 4 PROGRAM INFORMATION: 4 PROJECT DESCRIPTION: 4 SCOPE OF SERVICES 5 1.0 OBJECTIVES 5 2.0 DELIVERABLES SUMMARY 5 2.1. Deliverables Summary Table 5 2.2. Table Parameters 7 2.2.1. Level of Detail 7 2.2.1.1. Level 1 7 2.2.1.2. Level 2 7 2.2.1.3. Level 3 8 2.2.2. Type 8 2.2.3. Tolerance 9 2.2.4. Minimum Artifact Size (Resolution) 9 3.0 SPECIFICATION OF DELIVERABLES 9 3.1. Imaging/Scan and Post Processing Plan 9 3.2. Registered Raw Data 9 3.3. 2D Drawings of Existing Conditions 10 3.3.1. Plans 10 3.3.2. Elevations 10 3.3.3. Sections 10 3.4. 3D/BIM Model of Existing Conditions 11 3.4.1. 3D Geometrical Models 11 3.4.1.1. Architectural 11 3.4.1.2. Structural 11 3.4.1.3. Mechanical 11 3.4.1.4. Electrical 11 3.4.1.5. Plumbing 11 3.4.2. Building Information Model 11 3.5. Building Information Model of Proposed Design 12 3.5.1. Architectural 12 3.5.2. Structural 13 3.5.3. Mechanical, Electrical, and Plumbing BIM 13 3.6. Design Coordination and Visualization Services 13 3.7. Quality Control Report 13 4.0 SCHEDULE OF DELIVERABLES 14 4.1. Submission Schedule 14 4.2. Modifications to Scanning or Post-Processing Plans 14 4.3. Status Reports 14 4.4. Post Scan Support Services 14 5.0 EVALUTATION FACTORS 14 5.1. Cost 15 5.2. Personnel and Past Performance 15 5.3. Preliminary Scan, Post-processing, and Quality Control Plans 15 6.0 GOVERNMENT FURNISHED INFORMATION 15 6.1. Current Drawings and Specifications 15 6.2. Site Visit 15 6.3. Pre-Bid Conference 15 6.4. Photos 16 6.5. Data Access 16 6.6. Site Access 16 6.7. Local Environmental Conditions 16 6.8. Background Check 16 6.9. Ownership and Rights in Data 16 7.0 ADMINISTRATION 17 7.1. GSA Representatives 17 7.2. Payments 17 Program Information and Project Description Program Information: In July 2003, the Office the Chief Architect (OCA) established the National 3D-4D-BIM Program. To date, OCA has 10+ BIM pilot projects completed, 15+ projects underway, while assessing and supporting BIM applications in 35+ ongoing projects across the nation. The power of visualization, coordination, simulation, and optimization from three-dimensional (3D), four-dimensional (4D), and BIM computer technologies allow GSA to more effectively meet customer, design, construction, and program requirements. GSA is committed to a strategic and incremental adoption of 3D, 4D, BIM technologies. One primary application area of this program includes the use of 3D imaging technology to augment and streamline the management of as-built spatial information (www.gsa.gov/bim). Project Description: Project Name: Birch Bayh Courthouse Renovation/Addition Building Type: Courthouse Approximate Area: 548,769 s.f. Year Built: 1905 Location: Indianapolis, Indiana Project Phase: The project is currently in the design phase (30% design), with construction scheduled to begin in 2009. Description: The Birch Bayh Courthouse (Appendix A) is a historic structure located in Indianapolis, Indiana. It is listed on the National Register of Historic Places. Constructed in 1905 to house the District Court, Post Office, and other Federal agencies, the building's interior showcases impressive, richly-ornamented finishes and features, including mosaic tile ceilings, cantilevered marble staircases, stained glass windows and decorative artwork and furnishings. The renovation will extend the life of the building. The building footprint is approximately 350 feet by 320 feet, and the total area is 548,769 SF. There are 5 stories (plus basement). The project will involve: ? improvements to the heating, ventilation, and air conditioning system, and plumbing upgrades ? interior alterations ? fire protection upgrades ? electrical upgrades ? roof replacement PROJECT DESCRIPTION Project Name: Birch Bayh Courthouse Renovation/Addition Building Type: Courthouse Approximate Area: 548,769 s.f. Year Built: 1905 Location: Indianapolis, Indiana Project Phase: The project is currently in the design phase (30% design), with construction scheduled to begin in 2009. Description: The Birch Bayh Courthouse is a historic structure located in Indianapolis, Indiana. It is listed on the National Register of Historic Places. Constructed in 1905 to house the District Court, Post Office, and other Federal agencies, the building's interior showcases impressive, richly-ornamented finishes and features, including mosaic tile ceilings, cantilevered marble staircases, stained glass windows and decorative artwork and furnishings. The renovation will extend the life of the building. The building footprint is approximately 350 feet by 320 feet, and the total area is 548,769 SF. There are 5 stories (plus basement). OBJECTIVES ? To create an accurate current-condition record of the existing building conditions and assist in the repair and alteration work throughout its design process. The deliverables from the interior scanning will be used primarily for (1) the documentation of existing conditions, and (2) the coordination of proposed building systems (under design) with the existing conditions as determined by (1). As-build drawings do not exist for some interstitial space for this building. The 3D imaging at this location will provide 2D CAD plans, elevations and geometric models and/or BIM required to document as-built conditions, including details of the interior spaces. The elevations will assist architecture and engineering firms in developing their restoration and renovation designs. ? To assist GSA in developing 3D Imaging Best Practices that will be incorporated into GSA?s BIM Guide Series. It is the intention of the government to develop the Best Practices in a collaborative way so that current and future 3D imaging yields high quality deliverables in the most efficient manner. Scope of Services Imaging/Scan and Post Processing Plan Registered Raw Data The contractor shall submit registered raw data. Such raw data may include point cloud data, calibrated photographs, satellite images, etc. If 3D imaging technology is employed, the preferred format for this data is in ASCII: x, y, z, I, R, G, B (if intensity and color information are available). Other formats may be acceptable and are subject to approval by the GSA COTR. The registered point cloud data shall be reduced in size, to filter noise and redundant data to the maximum extent possible without compromising the accuracy and resolution of the model. 2D Drawings of Existing Conditions The contractor shall submit 2D representations of existing conditions (e.g., represent deformations and out-of-plumb conditions of artifacts that are subject to the artifact size definitions) of the areas scanned using the registered raw data. The government shall provide current drawings and specifications for each facility structure, if available, after GSA issues the Notice to Proceed. The 3D imaging information is expected to be used for verification and modification of existing 2D CAD drawings which will be provided by the GSA to the contractor. 3D/BIM Model of Existing Conditions The contractor shall model the existing condition of the facilities (e.g., represent deformations and out-of-plumb conditions of artifacts that are subject to the artifact size definitions) for the architectural, structural, mechanical, electrical, and plumbing components listed below using either a 3D model and/or a BIM model. Building Information Model of Proposed Design Contractor shall provide a BIM of the building interior and exterior based on Design Development documents and of the MEP system based on Engineering Design documents. Proposed design documents will be provided by the GSA COTR. Design Coordination and Visualization Services The contractor shall coordinate and identify any possible conflicts between existing (as-is) conditions and the proposed design solution, informing the design team of any current 2D errors or omissions. Quality Control Report Site Visit GSA will coordinate a building tour in the afternoon on 8/16/07. Should the offeror like to participate in the building tour, further details can be obtained by emailing the contracting specialist. Pre-Bid Conference The CO, GSA COTR, and regional teams will hold a pre-bid teleconference on 8/22/07 at 1pm EDT. Contractors bidding on any portion of this solicitation will have the opportunity to gain clarifications on that day by calling the conference number: 888-790-6578 and using the passcode: BIM NOTE: THIS NOTICE WAS NOT POSTED TO FEDBIZOPPS ON THE DATE INDICATED IN THE NOTICE ITSELF (09-AUG-2007); HOWEVER, IT DID APPEAR IN THE FEDBIZOPPS FTP FEED ON THIS DATE. PLEASE CONTACT fbo.support@gsa.gov REGARDING THIS ISSUE.
- Web Link
-
Link to FedBizOpps document.
(http://www.fbo.gov/spg/GSA/PBS/PHA/PR200707030010/listing.html)
- Place of Performance
- Address: INDIANAPOLIS, IN
- Zip Code: 00000
- Country: UNITED STATES
- Zip Code: 00000
- Record
- SN01368331-F 20070811/070809230715 (fbodaily.com)
- Source
-
FedBizOpps Link to This Notice
(may not be valid after Archive Date)
| FSG Index | This Issue's Index | Today's FBO Daily Index Page |