SOLICITATION NOTICE
84 -- Body Armor
- Notice Date
- 8/27/2007
- Notice Type
- Solicitation Notice
- Contracting Office
- 45 West Street, Fort Drum, NY 13602
- ZIP Code
- 13602
- Solicitation Number
- W16XU772252802-01
- Response Due
- 8/30/2007
- Archive Date
- 2/26/2008
- Small Business Set-Aside
- N/A
- Description
- Bids are being solicited under solicitation number W16XU772252802-01. This announcement constitutes the only solicitation; bids are being requested and a written solicitation will not be issued. The solicitation is issued as an invitation for bids (IFB), unless otherwise indicated herein. If your company can provide the product/services listed on the solicitation and comply with all of the solicitation instructions, please respond to this notice. To view the specifications, please go to www.FedBid.com and reference Buy No. 47686_05. GSA Schedule Bids Only: Sellers bidding on this opportunity MUST have the items requested on an existing GSA Schedule. The Schedule must either be in the Seller's name or the Seller must be able to document its ability to act as an agent of a partner's Schedule. Sellers may offer Open Market items only in accordance with the approved Terms and Conditions of their respective GSA Schedule AND upon approval from the soliciting Contracting Officer. Information regarding GSA Schedules can be found at www.GSA.gov. This requirement is unrestricted and only qualified sellers may submit bids. The solicitation pricing on www.FedBid.com will start on the date this solicitation is posted and will end on 2007-08-30 16:00:00.0 Eastern Time or as otherwise displayed at www.FedBid.com. FOB Destination shall be Fort Drum, NY 13602 The USA ACA Ft. Drum requires the following items, Brand Name or Equal, to the following: LI 001, Body Armor: Salient characteristics: Matrix Bronze level 3A body armor designed to be concealed under a lightweight uniform shirt. 1 set protective panels (1 front and 1 back). 1 removable-washable outer carrier (1 front and 1 back). Plate pocket located on the inside of front vest carrier for one each 5X8 soft trauma reduction device-shoulder and waist adjustment straps constructed from soft elastomeric composite material with a minimum of three inches of girth adjustment-QwikTab hook fasteners-Nylon-cotton rip stop covers the entire rear exterior of the Matrix Armorwear carrier system. The body side fabric of Matrix Armorwear is a wicking mesh. Shirttails both front and rear constructed from wicking fabric. Protective panels must be inserted from the strike-face side of the carrier and secured by means of a self-locking number 4.5 coil zipper. Scooped neckline-ballistic panel cover covered in 100 percent anti-microbial Olefin treated for water repellency-construction 70 denier and sized 110X85". Inner cover material must be stain-resistant, oder and mildew resistant. Ballistic panels constructed of woven Twaron and unidirectional polyethylene and no stitching completely thru the entire ballistic panel(s), with exception to tacks at the panels edges. Must meet NIJ standards. SIZE 38/40 L - COLOR NAVY , 10, EA; LI 002, Body Armor: Salient characteristics: Matrix Bronze level 3A body armor designed to be concealed under a lightweight uniform shirt. 1 set protective panels (1 front and 1 back) 1 removable-washable outer carrier (1 front and 1 back). A plate pocket located on the inside of front vest carrier for one each 5X8 soft trauma reduction device-shoulder and waist adjustment straps constructed from soft elastomeric composite material with a minimum of three inches of girth adjustment-QwikTab hook fasteners-Nylon-cotton rip stop covers the entire rear exterior of the Matrix Armorwear carrier system. The body side fabric of Matrix Armorwear is a wicking mesh. Shirttails both front and rear constructed from wicking fabric. Protective panels must be inserted from the strike-face side of the carrier and secured by means of a self-locking number 4.5 coil zipper. Scooped neckline-ballistic panel cover covered in 100 percent anti-microbial Olefin treated for water repellency-construction 70 denier and sized 110X85". Inner cover material must be stain-resistant, odor and mildew resistant. Ballistic panels constructed of woven Twaron and unidirectional polyethylene and no stitching completely thru the entire ballistic panel(s), with exception to tacks at the panels edges. Must meet NIJ standards. SIZE 42/44 L - COLOR NAVY, 30, EA; LI 003, Body Armor: Salient characteristics: Matrix Bronze level 3A body armor designed to be concealed under a lightweight uniform shirt. 1 set protective panels (1 front and 1 back) 1 removable-washable outer carrier (1 front and 1 back). A plate pocket located on the inside of front vest carrier for one each 5X8 soft trauma reduction device-shoulder and waist adjustment straps constructed from soft elastomeric composite material with a minimum of three inches of girth adjustment-QwikTab hook fasteners-Nylon-cotton rip stop covers the entire rear exterior of the Matrix Armorwear carrier system. The body side fabric of Matrix Armorwear is a wicking mesh. Shirttails both front and rear constructed from wicking fabric. Protective panels must be inserted from the strike-face side of the carrier and secured by means of a self-locking number 4.5 coil zipper. Scooped neckline-ballistic panel cover covered in 100 percent anti-microbial Olefin treated for water repellency-constuction 70 denier and sized 110X85". Inner cover material must be stain-resistant, oder and mildew resistant. Ballistic panels constructed of woven Twaron and unidirectional polyethylene and no stitching completely thru the entire ballistic panel(s), with exception to tacks at the panels edges. Must meet NIJ standards. SIZE 46/48 L - COLOR NAVY, 35, EA; LI 004, Body Armor: Salient characteristics: Matrix Bronze level 3A body armor-designed to be concealed under a lightweight uniform shirt. 1 set protective panels (1 front and 1 back). 1 removable-washable outer carrier (1 front and 1 back). A plate pocket located on the inside of front vest carrier for one each 5X8 soft trauma reduction device-shoulder and waist adjustment straps constructed from soft elastomeric composite material with a minimum of three inches of girth adjustment-QwikTab hook fasteners-Nylon-cotton rip stop covers the entire rear exterior of the Matrix Armorwear carrier system. The body side fabric of Matrix Armorwear is a wicking mesh. Shirttails both front and rear constructed from wicking fabric. Protective panels must be inserted from the strike-face side of the carrier and secured by means of a self-locking number 4.5 coil zipper. Scooped neckline-ballistic panel cover covered in 100 percent anti-microbial Olefin treated for water repellency-constuction 70 denier and sized 110X85". Inner cover material must be stain-resistant, oder and mildew resistant. Ballistic panels constructed of woven Twaron and unidirectional polyethylene and no stitching completely thru the entire ballistic panel(s), with exception to tacks at the panels edges. Must meet NIJ standards. SIZE 50/52 L - COLOR NAVY , 15, EA; LI 005, Body Armor: Salient characteristics: Matrix Bronze level 3A body armor designed to be concealed under a lightweight uniform shirt. 1 set protective panels (1 front and 1 back). 1 removable-washable outer carrier (1 front and 1 back). A plate pocket located on the inside of front vest carrier for one each 5X8 soft trauma reduction device-shoulder and waist adjustment straps constructed from soft elastomeric composite material with a minimum of three inches of girth adjustment-QwikTab hook fasteners-Nylon-cotton rip stop covers the entire rear exterior of the Matrix Armorwear carrier system. The body side fabric of Matrix Armorwear is a wicking mesh. Shirttails both front and rear constructed from wicking fabric. Protective panels must be inserted from the strike-face side of the carrier and secured by means of a self-locking number 4.5 coil zipper. Scooped neckline-ballistic panel cover covered in 100 percent anti-microbial Olefin treated for water repellency-constuction 70 denier and sized 110X85". Inner cover material must be stain-resistant, oder and mildew resistant. Ballistic panels constructed of woven Twaron and unidirectional polyethylene and no stitching completely thru the entire ballistic panel(s), with exception to tacks at the panels edges. Must meet NIJ standards. SIZE SMALL LONG FEMALE - COLOR NAVY , 5, EA; LI 006, Body Armor: Salient characteristics: Matrix Bronze level 3A body armor designed to be concealed under a lightweight uniform shirt. 1 set protective panels (1 front and 1 back). 1 removable-washable outer carrier (1 front and 1 back). A plate pocket located on the inside of front vest carrier for one each 5X8 soft trauma reduction device-shoulder and waist adjustment straps constructed from soft elastomeric composite material with a minimum of three inches of girth adjustment-QwikTab hook fasteners-Nylon-cotton rip stop covers the entire rear exterior of the Matrix Armorwear carrier system. The body side fabric of Matrix Armorwear is a wicking mesh. Shirttails both front and rear constructed from wicking fabric. Protective panels must be inserted from the strike-face side of the carrier and secured by means of a self-locking number 4.5 coil zipper. Scooped neckline-ballistic panel cover covered in 100 percent anti-microbial Olefin treated for water repellency-constuction 70 denier and sized 110X85". Inner cover material must be stain-resistant, oder and mildew resistant. Ballistic panels constructed of woven Twaron and unidirectional polyethylene and no stitching completely thru the entire ballistic panel(s), with exception to tacks at the panels edges. Must meet NIJ standards. SIZE MEDIUM LONG FEMALE - COLOR NAVY , 10, EA; LI 007, Body Armor: Salient characteristics: Matrix Bronze level 3A body armor designed to be concealed under a lightweight uniform shirt. 1 set protective panels (1 front and 1 back). 1 removable-washable outer carrier (1 front and 1 back). A plate pocket located on the inside of front vest carrier for one each 5X8 soft trauma reduction device-shoulder and waist adjustment straps constructed from soft elastomeric composite material with a minimum of three inches of girth adjustment-QwikTab hook fasteners-Nylon-cotton rip stop covers the entire rear exterior of the Matrix Armorwear carrier system. The body side fabric of Matrix Armorwear is a wicking mesh. Shirttails both front and rear constructed from wicking fabric. Protective panels must be inserted from the strike-face side of the carrier and secured by means of a self-locking number 4.5 coil zipper. Scooped neckline-ballistic panel cover covered in 100 percent anti-microbial Olefin treated for water repellency-constuction 70 denier and sized 110X85". Inner cover material must be stain-resistant, oder and mildew resistant. Ballistic panels constructed of woven Twaron and unidirectional polyethylene and no stitching completely thru the entire ballistic panel(s), with exception to tacks at the panels edges. Must meet NIJ standards. SIZE LARGE LONG FEMALE - COLOR NAVY , 5, EA; LI 008, Body Armor: Salient characteristics: Matrix Bronze level 3A body armor designed to be concealed under a lightweight uniform shirt. 1 set protective panels (1 front and 1 back). 1 removable-washable outer carrier (1 front and 1 back). A plate pocket located on the inside of front vest carrier for one each 5X8 soft trauma reduction device-shoulder and waist adjustment straps constructed from soft elastomeric composite material with a minimum of three inches of girth adjustment-QwikTab hook fasteners-Nylon-cotton rip stop covers the entire rear exterior of the Matrix Armorwear carrier system. The body side fabric of Matrix Armorwear is a wicking mesh. Shirttails both front and rear constructed from wicking fabric. Protective panels must be inserted from the strike-face side of the carrier and secured by means of a self-locking number 4.5 coil zipper. Scooped neckline-ballistic panel cover covered in 100 percent anti-microbial Olefin treated for water repellency-constuction 70 denier and sized 110X85".-Inner cover material must be stain-resistant, oder and mildew resistant. Ballistic panels constructed of woven Twaron and unidirectional polyethylene and no stitching completely thru the entire ballistic panel(s), with exception to tacks at the panels edges. Must meet NIJ standards. SIZE 42/44 L - COLOR OD GREEN , 15, EA; LI 009, Body Armor: Salient characteristics: Matrix Bronze level 3A body armor designed to be concealed under a lightweight uniform shirt. 1 set protective panels (1 front and 1 back). 1 removable-washable outer carrier (1 front and 1 back). A plate pocket located on the inside of front vest carrier for one each 5X8 soft trauma reduction device-shoulder and waist adjustment straps constructed from soft elastomeric composite material with a minimum of three inches of girth adjustment-QwikTab hook fasteners-Nylon-cotton rip stop covers the entire rear exterior of the Matrix Armorwear carrier system. The body side fabric of Matrix Armorwear is a wicking mesh. Shirttails both front and rear constructed from wicking fabric. Protective panels must be inserted from the strike-face side of the carrier and secured by means of a self-locking number 4.5 coil zipper. Scooped neckline-ballistic panel cover covered in 100 percent anti-microbial Olefin treated for water repellency-constuction 70 denier and sized 110X85". Inner cover material must be stain-resistant, oder and mildew resistant.-Ballistic panels constructed of woven Twaron and unidirectional polyethylene and no stitching completely thru the entire ballistic panel(s), with exception to tacks at the panels edges. Must meet NIJ standards. SIZE 46/48 L - COLOR OD GREEN , 10, EA; LI 010, Body Armor: Salient characteristics: Matrix Bronze level 3A body armor designed to be concealed under a lightweight uniform shirt. 1 set protective panels (1 front and 1 back). 1 removable-washable outer carrier (1 front and 1 back). A plate pocket located on the inside of front vest carrier for one each 5X8 soft trauma reduction device-shoulder and waist adjustment straps constructed from soft elastomeric composite material with a minimum of three inches of girth adjustment-QwikTab hook fasteners-Nylon-cotton rip stop covers the entire rear exterior of the Matrix Armorwear carrier system. The body side fabric of Matrix Armorwear is a wicking mesh. Shirttails both front and rear constructed from wicking fabric. Protective panels must be inserted from the strike-face side of the carrier and secured by means of a self-locking number 4.5 coil zipper. Scooped neckline-ballistic panel cover covered in 100 percent anti-microbial Olefin treated for water repellency-constuction 70 denier and sized 110X85". Inner cover material must be stain-resistant, oder and mildew resistant. Ballistic panels constructed of woven Twaron and unidirectional polyethylene and no stitching completely thru the entire ballistic panel(s), with exception to tacks at the panels edges. Must meet NIJ standards. SIZE 50/52 L - COLOR OD GREEN, 5, EA; LI 011, Body Armor: Salient characteristics: Matrix Bronze level 3A body armor designed to be concealed under a lightweight uniform shirt. 1 set protective panels (1 front and 1 back). 1 removable-washable outer carrier (1 front and 1 back). A plate pocket located on the inside of front vest carrier for one each 5X8 soft trauma reduction device-shoulder and waist adjustment straps constructed from soft elastomeric composite material with a minimum of three inches of girth adjustment-QwikTab hook fasteners-Nylon-cotton rip stop covers the entire rear exterior of the Matrix Armorwear carrier system. The body side fabric of Matrix Armorwear is a wicking mesh. Shirttails both front and rear constructed from wicking fabric. Protective panels must be inserted from the strike-face side of the carrier and secured by means of a self-locking number 4.5 coil zipper. Scooped neckline-ballistic panel cover covered in 100 percent anti-microbial Olefin treated for water repellency-constuction 70 denier and sized 110X85". Inner cover material must be stain-resistant, oder and mildew resistant. Ballistic panels constructed of woven Twaron and unidirectional polyethylene and no stitching completely thru the entire ballistic panel(s), with exception to tacks at the panels edges. Must meet NIJ standards. SIZE SMALL LONG FEMALE - COLOR OD GREEN , 2, EA; LI 012, Body Armor: Salient characteristics: Matrix Bronze level 3A body armor designed to be concealed under a lightweight uniform shirt. 1 set protective panels (1 front and 1 back). 1 removable-washable outer carrier (1 front and 1 back). A plate pocket located on the inside of front vest carrier for one each 5X8 soft trauma reduction device-shoulder and waist adjustment straps constructed from soft elastomeric composite material with a minimum of three inches of girth adjustment-QwikTab hook fasteners-Nylon-cotton rip stop covers the entire rear exterior of the Matrix Armorwear carrier system. The body side fabric of Matrix Armorwear is a wicking mesh. Shirttails both front and rear constructed from wicking fabric. Protective panels must be inserted from the strike-face side of the carrier and secured by means of a self-locking number 4.5 coil zipper. Scooped neckline-ballistic panel cover covered in 100 percent anti-microbial Olefin treated for water repellency-constuction 70 denier and sized 110X85". Inner cover material must be stain-resistant, oder & mildew resistant. Ballistic panels constructed of woven Twaron and unidirectional polyethylene and no stitching completely thru the entire ballistic panel(s), with exception to tacks at the panels edges. Must meet NIJ standards. SIZE MEDIUM LONG FEMALE - COLOR OD GREEN , 4, EA; LI 013, Body Armor: Salient characteristics: Matrix Bronze level 3A body armor designed to be concealed under a lightweight uniform shirt. 1 set protective panels (1 front and 1 back). 1 removable-washable outer carrier (1 front and 1 back). A plate pocket located on the inside of front vest carrier for one each 5X8 soft trauma reduction device-shoulder and waist adjustment straps constructed from soft elastomeric composite material with a minimum of three inches of girth adjustment-QwikTab hook fasteners-Nylon-cotton rip stop covers the entire rear exterior of the Matrix Armorwear carrier system. The body side fabric of Matrix Armorwear is a wicking mesh. Shirttails both front and rear constructed from wicking fabric. Protective panels must be inserted from the strike-face side of the carrier and secured by means of a self-locking number 4.5 coil zipper. Scooped neckline-ballistic panel cover covered in 100 percent anti-microbial Olefin treated for water repellency-constuction 70 denier and sized 110X85". Inner cover material must be stain-resistant, oder and mildew resistant. Ballistic panels constructed of woven Twaron and unidirectional polyethylene and no stitching completely thru the entire ballistic panel(s), with exception to tacks at the panels edges. Must meet NIJ standards. SIZE LARGE LONG FEMALE - COLOR OD GREEN , 4, EA; For this solicitation, USA ACA Ft. Drum intends to conduct an online competitive reverse auction to be facilitated by the third-party reverse auction provider, FedBid, Inc. FedBid has developed an online, anonymous, browser based application to conduct the reverse auction. A Seller may submit a series of pricing bids, which descend in price during the specified period of time for the aforementioned reverse auction. USA ACA Ft. Drum is taking this action in an effort to improve both seller access and awareness of requests and the agency's ability to gather multiple, completed, real-time bids. All responsible Sellers that respond to this solicitation MUST submit the pricing portion of their bid using the online exchange located at www.FedBid.com. There is no cost to register, review procurement data or make a bid on www.FedBid.com. Sellers that are not currently registered to use www.FedBid.com should proceed to www.FedBid.com to complete their free registration. Sellers that require special considerations or assistance may contact the FedBid Helpdesk at 877-9FEDBID (877-933-3243) or via email at clientservices@fedbid.com. Sellers may not artificially manipulate the price of a transaction on www.FedBid.com by any means. It is unacceptable to place bad faith bids, to use decoys in the www.FedBid.com process or to collude with the intent or effect of hampering the competitive www.FedBid.com process. Should Sellers require additional clarification, contact FedBid at 877-9FEDBID (877-933-3243) or clientservices@fedbid.com. Use of FedBid: Buyers and Sellers agree to conduct this transaction through FedBid in compliance with the FedBid Terms of Use. Buyers and Sellers understand that FedBid ranks all bids by price; however, pursuant to applicable acquisition regulations and/or departmental guidelines, Buyers may use criteria other than price to evaluate offers. Accordingly, please note that, unless otherwise specified herein below, to the extent required by applicable regulations and/or guidelines, award will be made to the responsible Seller whose offer conforming to the solicitation will be most advantageous to the Buyer on the basis of price, technical capability, delivery, and past performance. The Offeror must comply with the following commercial item terms and conditions. FAR 52.252-1, Solicitation Provisions Incorporated by Reference (The full text of FAR Provisions may be accessed electronically at http://farsite.hill.af.mil/ ) , FAR 52.204-8 Annual Representation and Certification (interested parties are required to input their Representations and Certifications into the online representations and certifications application (ORCA) database which is located at the following internet address: http://www.bpn.gov.), FAR 52.211-6 Brand Name or Equal, FAR 52.212-1 Instructions to Offeror?s, FAR 52.212-2 - Evaluation-Commercial Items (the following factors shall be used to evaluate offers: Award shall be made to the low responsible, responsive quoter); FAR 52.212-3 Offeror Representations and Certifications. DFAR 252.212-7000 Offeror Representations and Certifications ? Commercial Items. The Offeror must comply with the following commercial item terms and conditions. FAR 52.252-2, Clauses Incorporated by Reference (The full text of FAR and DFAR Clauses may be accessed electronically at http://farsite.hill.af.mil/), FAR 52.204-7 -- Central Contractor Registration(CCR), (interested parties are required to be registered in the CCR database which is located at the following internet address: http://www.bpn.gov.),FAR 52.212-4, Contract Terms and conditions ? Commercial Items, 52.212-5, Contract Terms and Conditions Required to Implement Statutes or Executive Orders ? Commercial Items. The following FAR Clauses cited within 52.212-5 are applicable to this acquisition: 52.219-6, 52.219-28, 52.222-3, 52.222-19, 52.222-21, 52.222-26, 52.222-36, 52.222-50, 52.225-13, and 52.232-33. DFAR 252.204-7004 Alt A, DFAR 252.212-7001, Contract Terms and Conditions Required to Implement Statutes or Executive Orders ? Commercial Items, apply to this acquisition, DFAR 252.232-7010 Levies on Contract Payments. The following Clauses cited within 252.232-7001 are applicable to this acquisition: 252.225-7001, 252.232-7003, 252.247-7023 and 252.225-7036. The ?FBO? provision located under the Contract/Bidding Req instruction is amended to change the following,this solicitation is being issued as a Request For Quote (RFQ) not an Invitation For Bid (IFB). FOB Destination CONUS (CONtinental U.S.).
- Web Link
-
www.fedbid.com (b-47686_05, n-7620)
(http://www.fedbid.com)
- Place of Performance
- Address: Fort Drum, NY 13602
- Zip Code: 13602
- Country: US
- Zip Code: 13602
- Record
- SN01386444-W 20070829/070827221423 (fbodaily.com)
- Source
-
FedBizOpps Link to This Notice
(may not be valid after Archive Date)
| FSG Index | This Issue's Index | Today's FBO Daily Index Page |