SOLICITATION NOTICE
60 -- Fiber Optic Repair Parts
- Notice Date
- 9/6/2007
- Notice Type
- Solicitation Notice
- Contracting Office
- 45 west st, Fort Drum , NY 13602
- ZIP Code
- 13602
- Solicitation Number
- W16ZU772320002
- Response Due
- 9/12/2007
- Archive Date
- 3/10/2008
- Small Business Set-Aside
- Service-Disabled Veteran-Owned
- Description
- This is a combined synopsis/solicitation for commercial items prepared in accordance with the format in FAR Subpart 12.6, in conjunction with FAR 13.5, as applicable, and as supplemented with additional information included in this notice. This announcement constitutes the only solicitation; bids are being requested and a written solicitation will not be issued. The solicitation number is W16ZU772320002 and is issued as an invitation for bids (IFB), unless otherwise indicated herein. The solicitation document and incorporated provisions and clauses are those in effect through Federal Acquisition Circular FAC 05-18. The associated North American Industrial Classification System (NAICS) code for this procurement is 334417 with a small business size standard of 500 employees. This requirement is a [ Service-Disabled Veteran Owned ] set-aside and only qualified offerors may submit bids. The solicitation pricing on www.FedBid.com will start on the date this solicitation is posted and will end on 2007-09-12 16:30:00.0 Eastern Time or as otherwise displayed at www.FedBid.com. FOB Destination shall be Fort Drum, NY 13602 The USA ACA Ft. Drum requires the following items, Brand Name or Equal, to the following: LI 001, Optifiber Certifying OTDR, Mainframe, Multimode OTDR Module with Optical Power Meter and source, 250X / 400X inspection camera, 62.5 ?m test jumpers and soft carry case, documentation MMC reader and hard protective cover. Certifies fiber with integrated Auto OTDR analysis, automated loss and length measurements and fiber endface inspection. Diagnose fiber with integrated ChannelMap, Auto OTDR and fiber endface inspection. Document fiber with LinkWare PC data management and reporting software. Enhance visibility into premise, campus and metro networks with event deadzones as short as 1 meter. Modular design supports multimode and singlemode testing. Package includes: Mainframe Battery MM OTDR module CD with LinkWare & manuals, 62.5 ?m launch cable Quick start guide AC adapter 16MB MMC USB cable Carrying strap OptiFiber Multimode OTDR + PM + Loss / Length Module FiberInspector Video Probe, 250x. Fluke Network part number OF-500-10 , 4, EA; LI 002, Fiber Optic Fusion Splicer, Handheld FTTH splicer fully functional fusion splicer designed specifically for fiber-to-the-home applications. The unit can be operated in space-constrained areas using only one hand. Designed for a minimum excess fiber length, the splicer features fully automatic fiber feed, alignment, splicing arc, and tension test. All splicing operations can be monitored for accuracy using an integrated CCD camera and a 2.5-inch LCD display. Fitel part number S121A , 4, EA; LI 003, Fiber Optic Connector Kit, includes all the components in the basic installation TKT-UNICAM plus tool adapters and patch cords needed to add single fiber connectors. UniCam Connector Continuity Test Set for single fiber connectors (includes CTS adapters and test jumpers) VFL Visual Fault Locator is included. Corning part number TKT-UNICAM-CTS-SF , 24, EA; LI 004, Hot Melt Heater, Quik-Temp(tm) Dual-Purpose oven from Kitco includes an 8 port epoxy heater block and a 6 port HotMelt heater block. Each heater block features its own on/off switch and is set to its own precise temperature. An installer can use one oven for both connector installation applications with no need for cooling stands. Kitco Part Number 0700-9110., 4, EA; LI 005, Universal ST/SC/FC Connector Holder,HotMelt ST fiber optic connector is a keyed bayonet style multimode/singlemode connector, compatible with all other manufacturers' ST connectors. The HotMelt series involves a pre-loaded adhesive as opposed to an epoxy hardening method which enables re-use in some situations. Much easier to install then epoxy based connectors, just heat up connector in a HotMelt oven for less than a minute then simply pull out and insert fiber. The connector employs pre-radiused PC zirconia ceramic ferrule technology for the highest quality possible from such an installer friendly product. Kitco part number 0700-5226., 24, EA; LI 006, Connector Holding Cooling Stand, Hot Melt fiber connector stand. Kitco part number 6191, 24, EA; LI 007, Hotmelt Termination Kit, Housed in a durable ABS case are all the essentials for terminating fiber connectors. Contains: Carbide Scribe, Syringes, TFS-1400 Stripper, A/B Fast Epoxy, ST Polish Disc, SC Polish Disc, Wipe Paper, TFS-1200 Fiber Scissor Fiber Optic Crimp Tool, 6um Diamond Polish Film, 1um Diamond Polish Film, .05um Aluminum Oxide Polish Film, Rubber Work Pad. Quest Technologies part number NFK-2000. , 24, EA; LI 008, SC Connector MM, Pre-polished, no epoxy fiber connectors. The Unicam series Multimode fiber connectors come ready to install on 50/125 and 62.5/125 fiber cables. Corning part number DMX-95-200-41, 200, EA; LI 009, SC Connector SM, Pre-polished, no epoxy fiber connectors. The Unicam series Singlemode fiber connectors come ready to install on 9/125 fiber cables. Corning part DMX-95-000-41. , 200, EA; LI 010, ST Connector MM, Pre-polished, no epoxy fiber connectors. The Unicam series Multimode fiber connectors come ready to install on 50/125 and 62.5/125 fiber cables. Corning Part Number DMX-95-000-50 , 200, EA; LI 011, ST Connector SM, Pre-polished, no epoxy fiber connectors. The Unicam series Singlemode fiber connectors come ready to install on 9/125 fiber cables. Corning Part Number DMX-95-200-51 , 200, EA; LI 012, Hot melt SC Connector MM, The SC Connector is designed for the most advanced fiber optic systems requiring exceptional stability, low reflections (single-mode) and high density. It is also available in multimode preloaded with Hot Melt adhesive, enabling a field termination in less than two minutes for multiple terminations. The Crimplok connector combines the speed of non-adhesive connectors with the performance characteristics of epoxy and hot melt connectors. The Hot Melt SC and Crimplok SC connectors are specifically intended for ease of termination in local area networks, and meet the requirements of system and cabling level standards. 3M part number 6300-W. , 200, EA; LI 013, Hot melt SC Connector SM, The SC Connector is designed for the most advanced fiber optic systems requiring exceptional stability, low reflections (single-mode) and high density. It is also available in multimode preloaded with Hot Melt adhesive, enabling a field termination in less than two minutes for multiple terminations. The Crimplok connector combines the speed of non-adhesive connectors with the performance characteristics of epoxy and hot melt connectors. The Hot Melt SC and Crimplok SC connectors are specifically intended for ease of termination in local area networks, and meet the requirements of system and cabling level standards. 3m part number 8300 , 200, EA; LI 014, Hot melt ST Connector MM, keyed bayonet style multimode/single-mode connector, compatible with ST connectors, which incorporates 3M hot melt adhesive and pre-radiused PC zirconia ceramic ferrule technology. 3M part number 6100-W , 200, EA; LI 015, Hot melt ST Connector SM, Hot Melt ST Fiber Optic Connector is a keyed bayonet style singlemode connector, compatible with ST connectors, which incorporates 3M feets hot melt adhesive and pre-radiused PC zirconia ceramic ferrule technology. 3M part number 8100-YS , 200, EA; LI 016, Single Mode Fiber Cable, PVC Riser(OFNR) Yellow, 9/125um/2.9x5.8mm Single Mode Duplex Cable. Part number S09-DX02-CRY, 1000, EA; LI 017, Multi-Mode Fiber Cable TLC Plenum MM 62.5/125um 2.9x5.8mm Multimode InfiniCor 300 Duplex Cable - Orange Color. Part number M62DX02-CPOI , 1000, EA; LI 018, Clear Box Tape, Highland part number 617020, 40, EA; LI 019, Splice Case, Made of a tough chemical-resistant material and a gasket seal that can stand up to the most severe conditions of moisture, vibration and extreme temperatures. It includes improved cable strain relief and a movable tray support. It is designed with larger and smaller interchangeable closure halves so you can select the size case that meets your needs. It is an ideal case for outside plant, underground, aerial, pedestal, and direct buried applications. 40-mm Standard Splice Sleeves have 2.9-mm after-shrink diameter. Economical SPCfiber? sleeves offer quality and reliability in a robust design and easy-to-use size for fiber optic applications. Clear outer tube with metallic stainless steel strength member allows viewing fiber color after splicing. Sleeves accommodate up to 1.4-mm fiber diameters. Sold 50 per package. 3M part number 2178-SA , 4, EA; LI 020, Fusion Splice Sleeve, 40-mm Standard Splice Sleeves have 2.9-mm after-shrink diameter. Economical SPCfiber? sleeves offer quality and reliability in a robust design and easy-to-use size for fiber optic applications. Clear outer tube with metallic stainless steel strength member allows viewing fiber color after splicing. Sleeves accommodate up to 1.4-mm fiber diameters. Sold 50 per package. SPC Fiber part number 791X030, 20, EA; LI 021, Fiber Optic Polishing Film 5um, The standard of 3M's lapping films. Precisely graded aluminum oxide particles coated on a 3 mil (0.076 mm) polyester film produce uniform fine finishes. 261X Aluminum Oxide Lapping Film - 5um Grit - Brown Color - 6"x6. 3M part number AO6X605261X , 200, EA; LI 022, Fiber Optic Polishing Film 3um, A durable resin system characterizes this slurry coated aluminum oxide 3 mil (0.076 mm) thick polyester film backed product. This product is designed for fiber optic polishing applications. 263X TP Aluminum Oxide Lapping Film - 3um Grit - Pink Color - 6"x6". 3M part number AO6X603263X , 200, EA; LI 023, Fiber Optic Poliching Film .05um, A durable resin system characterizes this slurry coated aluminum oxide 3 mil (0.076 mm) thick polyester film backed product. 263X TP Aluminum Oxide Lapping Film - 0.05um Grit - Pale Yellow Color - 6"x6". 3M part number AO6X605263X , 200, EA; For this solicitation, USA ACA Ft. Drum intends to conduct an online competitive reverse auction to be facilitated by the third-party reverse auction provider, FedBid, Inc. FedBid has developed an online, anonymous, browser based application to conduct the reverse auction. An Offeror may submit a series of pricing bids, which descend in price during the specified period of time for the aforementioned reverse auction. USA ACA Ft. Drum is taking this action in an effort to improve both vendor access and awareness of requests and the agency's ability to gather multiple, completed, real-time bids. All responsible Offerors that respond to this solicitation MUST submit the pricing portion of their bid using the online exchange located at www.FedBid.com. There is no cost to register, review procurement data or make a bid on www.FedBid.com. Offerors that are not currently registered to use www.FedBid.com should proceed to www.FedBid.com to complete their free registration. Offerors that require special considerations or assistance may contact the FedBid Helpdesk at 877-9FEDBID (877-933-3243) or via email at clientservices@fedbid.com. Offerors may not artificially manipulate the price of a transaction on www.FedBid.com by any means. It is unacceptable to place bad faith bids, to use decoys in the www.FedBid.com process or to collude with the intent or effect of hampering the competitive www.FedBid.com process. Should offerors require additional clarification, notify the point of contact or FedBid at 877-9FEDBID (877-933-3243) or clientservices@fedbid.com. Use of FedBid: Buyers and Sellers agree to conduct this transaction through FedBid in compliance with the FedBid Terms of Use. Buyers and Sellers understand that FedBid ranks all bids by price; however, pursuant to applicable acquisition regulations and/or departmental guidelines, Buyers may use criteria other than price to evaluate offers. Accordingly, please note that, unless otherwise specified herein below, to the extent required by applicable regulations and/or guidelines, award will be made to the responsible Seller whose offer conforming to the solicitation will be most advantageous to the Buyer on the basis of price, technical capability, delivery, and past performance. The Offeror must comply with the following commercial item terms and conditions. FAR 52.252-1, Solicitation Provisions Incorporated by Reference (The full text of FAR Provisions may be accessed electronically at http://farsite.hill.af.mil/ ) , FAR 52.204-8 Annual Representation and Certification (interested parties are required to input their Representations and Certifications into the online representations and certifications application (ORCA) database which is located at the following internet address: http://www.bpn.gov.), FAR 52.211-6 Brand Name or Equal, FAR 52.212-1 Instructions to Offeror?s, FAR 52.212-2 - Evaluation-Commercial Items (the following factors shall be used to evaluate offers: Award shall be made to the low responsible, responsive quoter); 52.212-3 Offeror Representations and Certifications. DFAR Provision 252.209-70001 Disclosure of Ownership or Controls by the Government of a terrorist country, and Provision 252.212-7000 Offeror representation and certifications-Commercial Items, The Offeror must comply with the following commercial item terms and conditions. FAR 52.252-2, Clauses Incorporated by Reference (The full text of FAR and DFAR Clauses may be accessed electronically at http://farsite.hill.af.mil/), FAR 52.204-7 -- Central Contractor Registration(CCR), (interested parties are required to be registered in the CCR database which is located at the following internet address: http://www.bpn.gov.),FAR 52.212-4, Contract Terms and conditions ? Commercial Items, 52.212-5, Contract Terms and Conditions Required to Implement Statutes or Executive Orders ? Commercial Items. The following FAR Clauses cited within 52.212-5 are applicable to this acquisition: 52.203-6, 52.219-4, 52.219-6, 52.219-8, 52.219-14, 52.219-28, 52.222-3, 52.222-19, 52.222-21, 52.222-26, 52.222-35, 52.222-36, 52.222-37, 52.222-39, 52.222-50, 52.225-13, and 52.232-33. DFAR 52.204-7004 Alt A, DFAR 252.212-7001, Contract Terms and Conditions Required to Implement Statutes or Executive Orders ? Commercial Items, apply to this acquisition, DFAR 252.232-7010 Levies on Contract Payments, The following Clauses cited within 252.212-7001 are applicable to this acquisition: 52.203-3, 52.225-7001, 252.225-7012, 252.225-7036, 252.232-7003, 252.243-7002 and 252.247-7023. FOB Destination CONUS (CONtinental U.S.) The ?FBO? provision located under the Contract/Bidding Req instruction is amended to change the following,this solicitation is being issued as a Request For Quote (RFQ) not an Invitation For Bid (IFB).
- Web Link
-
www.fedbid.com (b-49476_03, n-8028)
(http://www.fedbid.com)
- Place of Performance
- Address: Fort Drum, NY 13602
- Zip Code: 13602
- Country: US
- Zip Code: 13602
- Record
- SN01397267-W 20070908/070906221639 (fbodaily.com)
- Source
-
FedBizOpps Link to This Notice
(may not be valid after Archive Date)
| FSG Index | This Issue's Index | Today's FBO Daily Index Page |