MODIFICATION
71 -- Storage Cabinets and Workbenches
- Notice Date
- 9/6/2007
- Notice Type
- Modification
- NAICS
- 337215
— Showcase, Partition, Shelving, and Locker Manufacturing
- Contracting Office
- Department of the Navy, Naval Supply Systems Command, FISC, Norfolk Naval Shipyard Annex, Building 1500 Code 530, 2nd Floor, Portsmouth, VA, 23709-5000, UNITED STATES
- ZIP Code
- 23709-5000
- Solicitation Number
- N00189-07-T-N130
- Response Due
- 9/11/2007
- Archive Date
- 9/26/2007
- Point of Contact
- Karen England, Contract Specialist, Phone 757-396-8372, Fax 757-396-8017,
- E-Mail Address
-
karen.england@navy.mil
- Small Business Set-Aside
- Total Small Business
- Description
- The subject Request for Quote is hereby reopened to provide the following information for purposes of clarifying the original Government specifications: Items 0001 through 0004: Widths to be 29inches nominal Unit shall mean a single unit and not an entire workstation Stainless Steel top shall be cap only - no fasteners needed Items 0003, 0004 and 0005 are meant to be single units only. They shall not be utilized as an assembled wall unit. Door requirements: 14 gauge steel, 3 point (top, bottom, middle) latching mechanism full center re-enforcement, epoxy coated The information below provides the partition and divider arrangement (s) as well as the number of roll-out and fixed shelves for the unit(s): Item 0001: Color - ALL BLUE 4 fixed shelves, 12inches deep Under bench cabinet 1 cabinet to be configured as follows: 33 inches tall, 29 inches wide Nominal 5 drawers with the following heights with the smallest drawer on top, 3 inches, 3-7/8 inches, 4-3/4inches, 6-1/8 inches, and 9-1/4 inches heights (nominal). 1st drawer being the top drawer 36 equally spaced divisions (6x6 configuration 5 partitions, 30 adjustable dividers) 2nd drawer 20 equally spaced divisions (4x5 configuration 3 partitions, 16 adjustable dividers) 3rd drawer 20 equally spaced divisions (4x5 configuration 3 partitions, 16 adjustable dividers) 4th drawer 12 equally spaced divisions (3x4 configuration 2 partitions, 9 adjustable dividers) 5th drawer 4 equally spaced divisions (2x2 configuration 1 partitions, 2 adjustable dividers) 1 cabinet to be configured as follows: 33 inches tall, 29 inches wide Nominal 5 drawers with the following heights with the smallest drawer on top, 3 inches, 3 inches, 3-7/8 inches, 4-3/4 inches, 4-3/4 inches, and 7-3/4 inches heights (nominal). 1st drawer being the top drawer 36 equally spaced divisions (6x6 configuration 5 partitions, 30 adjustable dividers) 2nd drawer 20 equally spaced divisions (4x5 configuration 3 partitions, 16 adjustable dividers) 3rd drawer 20 equally spaced divisions (4x5 configuration 3 partitions, 16 adjustable dividers) 4th drawer 12 equally spaced divisions (3x4 configuration 2 partitions, 9 adjustable dividers) 5th drawer 4 equally spaced divisions (2x2 configuration 1 partitions, 2 adjustable dividers) Item 002: Color ALL BLUE 2 fixed shelves, 12 inches deep 1 cabinet to be configured as follows: 33 inches tall, 29 inches wide Nominal 5 drawers with the following heights with the smallest drawer on top, 3 inches, 3-7/8 inches, 4-3/4 inches, 6-1/8 inches, and 9-1/4 inches heights (nominal). 1st drawer being the top drawer 36 equally spaced divisions (6x6 configuration 5 partitions, 30 adjustable dividers) 2nd drawer 20 equally spaced divisions (4x5 configuration 3 partitions, 16 adjustable dividers) 3rd drawer 20 equally spaced divisions (4x5 configuration 3 partitions, 16 adjustable dividers) 4th drawer 12 equally spaced divisions (3x4 configuration 2 partitions, 9 adjustable dividers) 5th drawer 4 equally spaced divisions (2x2 configuration 1 partitions, 2 adjustable dividers) 1 cabinet to be configured as follows: 33 inches tall, 29 inches wide Nominal 5 drawers with the following heights with the smallest drawer on top, 3 inches, 3 inches, 3-7/8 inches, 4-3/4 inches, 4-3/4 inches, and 7-3/4 inches heights (nominal) 1st drawer being the top drawer 36 equally spaced divisions (6x6 configuration 5 partitions, 30 adjustable dividers) 2nd drawer 20 equally spaced divisions (4x5 configuration 3 partitions, 16 adjustable dividers) 3rd drawer 20 equally spaced divisions (4x5 configuration 3 partitions, 16 adjustable dividers) 4th drawer 12 equally spaced divisions (3x4 configuration 2 partitions, 9 adjustable dividers) 5th drawer 4 equally spaced divisions (2x2 configuration 1 partitions, 2 adjustable dividers) Item 003:Color- BLUE Qty (21); LIGHT GREEN QTY (2) (1) 18 GA minimum adjustable shelf, 800# shelf capacity Roll out shelves with 14 GA minimum internal reinforcement, and 14 GA minimum cover 6 drawers with the following heights with the smallest drawer on top, 3-7/8 inches, 3-7/8 inches, 6-61/8 inches, 6-1/8 inches, 6-1/8 inches and 7-3/4 inches heights (nominal). 78 inches tall, 29 inches wide Nominal 1st drawer being the top drawer 36 equally spaced divisions (6x6 configuration 5 partitions, 30 adjustable dividers) 2nd drawer 25 equally spaced divisions (5x5 configuration 4 partitions, 20 adjustable dividers) 3rd drawer 20 equally spaced divisions (4x5 configuration 3 partitions, 16 adjustable dividers) 4th drawer 20 equally spaced divisions (4x5 configuration 3 partitions, 16 adjustable dividers) 5th drawer 20 equally spaced divisions (4x5 configuration 3 partitions, 16 adjustable dividers) 6th drawer 12 equally spaced divisions (3x4 configuration 2 partitions, 9 adjustable dividers) Item 004 Color - BLUE (4) 18 GA minimum adjustable shelves, 800# shelf capacity 29 inches wide Nominal Item 005: Color- BLUE 800 lb weight capacity per shelf 7 shelves equally spaced within the cabinet Item 0005: Original ordering data specifies a 50 inch deep drawer. This item is to be a shelf unit used for storage of large rubber sheets of material: Cabinet 78 inches tall, 58-1/4 inches wide, 50 inches deep minimum QTY (1) 100% shelf extension using 11 GA minimum adjustable plug in guide rails fully weld pallet jack base with front or rear access Can be moved with forklift or pallet truck while fully loaded Max Load 5,600 lbs 800 lb weight capacity per shelf Outer housings to be 14 GA steel minimum Drawer bottoms to be 14 GA steel minimum All corners ? welded and surface ground Shelf fronts formed and hemmed with no sharp edges or 90 degree bends Shelf carriage to be 11 GA minimum with ball bearing rollers Guide rails must be plug in for quick and easy adjustment 7 shelves equally spaced within the cabinet NOTE: THIS NOTICE SHALL TAKE PRESEDENCE IN THE EVENT OF CONLIFTING INFORMATION BETWEEN THE ORIGINAL SPECIFICATIONS AND THOSE SPECIFICATIONS SHOWN HEREIN. NOTE: THIS NOTICE WAS NOT POSTED TO FEDBIZOPPS ON THE DATE INDICATED IN THE NOTICE ITSELF (06-SEP-2007); HOWEVER, IT DID APPEAR IN THE FEDBIZOPPS FTP FEED ON THIS DATE. PLEASE CONTACT fbo.support@gsa.gov REGARDING THIS ISSUE.
- Web Link
-
Link to FedBizOpps document.
(http://www.fbo.gov/spg/DON/NAVSUP/N00189A/N00189-07-T-N130/listing.html)
- Place of Performance
- Address: Portsmouth, VA
- Zip Code: 23709-5000
- Country: UNITED STATES
- Zip Code: 23709-5000
- Record
- SN01398004-F 20070908/070906230118 (fbodaily.com)
- Source
-
FedBizOpps Link to This Notice
(may not be valid after Archive Date)
| FSG Index | This Issue's Index | Today's FBO Daily Index Page |