SOLICITATION NOTICE
J -- preventive Maintenance
- Notice Date
- 9/11/2007
- Notice Type
- Solicitation Notice
- NAICS
- 236220
— Commercial and Institutional Building Construction
- Contracting Office
- Department of Health and Human Services, National Institutes of Health, Office of Administration, 6011 Executive Blvd, Rm 538, Rockville, MD, 20892-7663, UNITED STATES
- ZIP Code
- 00000
- Solicitation Number
- 263-2007-Q-(gz)-0202
- Response Due
- 9/25/2007
- Archive Date
- 9/25/2007
- Description
- The National of Health (NIH), National Institute Division of Veterinary Resources Scientific Resources is seeking a Contractor to furnish all the necessary trained/experienced personnel, labor, tools, supplies, materials, parts, and equipment required to provide routine preventive maintenance inspections, repairs/adjustments during inspections, call-back repair services and special repair service. Contractor shall provide comprehensive preventive maintenance and quality assurance to ensure all covered equipment operates with maximum dependability and efficiency. Successful contract performance shall include prevention or early detection and correction of deficiencies, proper repair and use of test equipment to prevent equipment damage during repairs or inspections. The contract period shall be for one (1) year for cage wash equipment to include rack and cage washers. The equipment is located at the National Institutes of Health, Poolesville, Maryland, in Building?s 102, 103 and 127 managed by the Division of Veterinary Resources, Office of Research Services. This contract covers preventive maintenance inspections, repairs during inspections, call-back repair and special projects service. All replacement parts (excluding parts and components listed and parts to be used in special projects) and miscellaneous hardware on each piece of cage wash equipment are covered under this contract. Facility Classification and Entry Requirements: Each animal facility is classified according to the pathogen status of the animals in that facility. The entrance requirements vary from facility to facility. The stricter the entry requirement, the lower the risk of introduction of pathogens to the facility. The Contractor shall contact the Animal Facility Manager for entry procedures and requirements for each facility prior to entry. Animal facilities are classified as conventional, limited access, specific pathogen free (SPF) or barrier for purposes of disease containment and prevention of cross contamination between facilities. Conventional Facility: There may be requirements for protective clothing in a conventional facility. Note: After entering a conventional facility, access is restricted into any Specific Pathogen Free (SPF/Barrier) facility on the same day unless the individual showers and makes a change of clothing. Limited Access: Limited access facility has strict clothing and entrance procedures. After entering a limited access facility, access is restricted into SPF facilities on the same day unless the individual showers and makes a change of clothing. Specific Pathogen Free (SPF/Barrier): Animals in an SPF facility are free from specific pathogens. After entering either conventional or limited access facilities, access is restricted into all SPF facilities on the same day unless the individual showers and makes a change of clothing. Note: Protective clothing includes, but not limited to shoe covers, masks, hair bonnets, disposable lab coat and jumpsuit, and are provided by the Government. Maintenance and Repair Service Responsibility for Service Utilities: The portions of utility connections servicing the cage wash equipment for which the Contractor shall be responsible include: Electrical: The Contractor shall inspect, maintain, repair and/or replace all electrical wiring and components from the load side of the building main disconnect to all cage wash equipment. Steam: The Contractor shall maintain, repair and/or replace as needed, all steam regulators, piping, piping insulation, gauges and all steam components from the main shut off valve feeding the cage washer to the cage washer. The Contractor shall maintain, repair and/or replace all pumps, piping, valves, strainers and steam traps on all steam condensate lines serving the cage washers. The minimum steam supply pressure is 40 psig. The Contractor shall notify the Project Officer or his/her Alternate of any indication of low steam pressure as soon as possible. Domestic hot water and city water: The Contractor shall inspect, maintain, repair and/or replace as needed, all piping, piping insulation, valves on the domestic hot water and city water systems from the main solenoid valve (including the solenoid valve) back to the cage washer. The minimum domestic hot water supply temperature is 140? Fahrenheit. The contractor shall notify the Project Officer or his/her Alternate of any indication of low domestic hot water temperature as soon as possible. Exhaust system: The Contractor shall inspect, maintain, repair and/or replace as needed all belts, shafts, motors, dampers controls and associated components on all exhaust fans that are installed as part of the cage washer. For cage washers that utilize building exhaust systems, the Contractor shall be responsible from the motorized damper (including the damper and actuator) back to the cage wash equipment. The Contractor shall notify the Project Officer or his/her Alternate of any exhaust or airflow problems as soon as possible. Preventive Maintenance Services: The Contractor shall perform preventive maintenance services that include the following: Inspect all mechanical, electrical, and plumbing components of each piece of cage wash equipment. The term "inspection" used in this contract means to check and/or test for satisfactory manufacturers recommended operating condition and performance. Perform all adjustments and repairs necessary to keep each piece of cage wash equipment in continuous optimum operating condition. Operate each piece of cage wash equipment through all cycles and observe for proper operation of all components. Inspect all tanks, chambers, manifolds, hoses, door gaskets, door latches, manifolds, and related equipment on each cage washer for leaks or other malfunctions. Defects found shall be corrected before equipment or parts are inoperable or become non-functional. Inspect, clean, and lubricate all motors, pumps, gear boxes, chains, pulleys and other moving parts on each piece of cage wash equipment. For cage washers equipped with an effluent tank, perform the inspection and make all necessary adjustments and repairs to the mechanical, electrical and the monitoring systems. Disassemble and clean all manifolds and jet sprays to ensure free water flow. Validate cage washer performance using a manufacturer's recommended temperature indicator on each cage washer to ensure a minimum water temperature of 180? Fahrenheit at the cage level. Monitor the temperature of the waste water out from the washers to ensure it is below the maximum waste water temperature to the sewer of 140? Fahrenheit. Provide the temperature readings of the hot water entering the cage washer and the waste water to the sewer with the inspection report. Notify the Project Officer or his/her Alternate of any deviations from the specified temperatures as soon as possible. When acidic chemicals are used to de-scale the animal cages, pans and the cage washer, provide pH measurement for waste water at cage washer discharge. These measurements shall be taken while the cage washer is being operated using each facility's Standard Operating Procedure for Acid Use. Provide the pH measurement with the inspection report. Notify the Project Officer or his/her Alternate of any abnormal pH levels in the cage washer effluent as soon as possible. Abnormal levels are pH readings below 6 or above 10. Correct any defects found with the cage wash equipment or/and install replacement parts as a result of any of the above inspections. Perform other maintenance services as recommended by the appropriate OEM literature. Preventive maintenance inspections shall be performed between 8:00 a.m. and 4:30 p.m., Monday through Friday (excluding Federal holidays). The Contractor shall schedule each inspection at least three (3) working days in advance with the Project Officer or his/her Alternate. The first preventive maintenance inspection shall be performed within thirty (30) days after the award of this contract. The Contractor shall provide a written report to the Project Officer or his/her Alternate within five (5) working days of the inspection. This report shall include a detailed description of what was inspected on each machine, the condition of each machine, any problems found, estimates of time required to perform the repairs, list of replacement parts and labor. Also included in the inspection report shall be the result of the cage washer temperature tests and the pH measurement of the cage washer effluent. All parts and labor incurred during the preventive maintenance service shall be included in the contract price. After the first preventive maintenance inspection, the remaining inspections shall be scheduled at 90-day intervals for the remainder of the contract period. At least four (4) preventive maintenance inspections shall be performed annually and billing shall be accomplished quarterly. Call-back Repair Services: In between scheduled inspections, if repairs are needed for the cage wash equipment, the Contractor shall provide call-back repair services for the equipment listed in attachment #1. At the time of the contract award, the Contractor shall furnish the Project Officer the name(s) and telephone number (s) of a person(s) to call when call-back service is needed. The Contractor shall begin work within 24 hours (excluding Federal holidays and weekends) of initial notification by Project Officer or his/her Alternate. The Project Officer or his/her Alternate shall provide the Contractor with a description of the problem, location of the cage wash equipment and type when calling for service. The Contractor shall prearrange with the Project Officer or his/her Alternate for building access for work that shall be performed after normal working hours. After the completion of the repair service, the Contractor shall provide the Project Officer or his/her Alternate documents as follows: a field service report signed by the authorized person (i.e. cage wash Foreman, Operator or other personnel authorized by the Project Officer) shall be completed with One (1) copy left with the signing person and one copy sent to the Project Officer. The report shall contain time and date the call was received by the Contractor, time and date the repair service was started, model number and serial number of the cage wash equipment, location of the equipment, a brief description of the problem and the corrective action taken, list of parts and components required, name and phone number of person requesting service, time and date that the service was completed. All parts and labor incurred during the call-back repair service shall be included in the contract price. Special Projects: The Contractor shall perform special projects for the cage washers listed in attachment # 1. Special projects include modifications or replacement of major components to improve operation, efficiency or safety of the cage washers. The cost of any special projects shall be on a time-and-materials basis. The price for the materials for special repairs shall be on the basis of an established catalogue or list price in effect when material is furnished, less all applicable discounts to the Government. In no event shall such prices be in excess of the Contractor's price to his most favored customer for the same item in like quantity or the current market price (whichever is lower). The direct labor hours to perform special projects shall be at the fixed rate labor for the current performance period. Parts and Materials: The Contractor shall maintain or have access to, 24 hour delivery and installation, all replacement parts and materials for the repair of each piece of cage wash equipment covered under this contract. All replacement parts and materials shall be specifically designed for the cage washers on which they are to be used. Replacement parts and materials furnished under this contract shall be provided at no additional cost to the Government with the exception of the major components listed below. Major components: Large pumps and motors (3 Horse Power or greater) Electronic dampers Steam coils Heat exchangers Temperature recorders Control panel (electromechanical, microprocessor) Prior to replacement of any of the above items, the Contractor shall submit a written cost estimate for the approval of the Project Officer or his/her Alternate. (Contract staff working in animal facilities are not authorized to commit or approve funds.) Replacement cost shall be billed separately. The price to be paid for the materials for special repairs shall be on the basis of an established catalogue or list price in effect when material furnished, less all applicable discounts to the government. In no event shall such prices be in excess of the Contractor's sale price to his most favored customer for the same item in like quantity or the current market price (whichever is lower). The direct labor hours to perform special projects shall be at the fixed labor rate for the current performance period. Exclusions: The contract does not include any labor or material for service lines and fittings, operating problems related to environmental conditions, e.g. electrical, steam, water, and/or ventilation that do not comply with equipment specifications. This contract does not include routine maintenance such as cleaning all catch screens, daily inspections of the wheels and axles for the spray arms, monitoring the chemical dispensing system. This type of routine maintenance shall be a responsibility of the Government. Contractor's Personnel: The Contractor shall have available under his direct employment and supervision the necessary trained personnel, organization, facilities and transportation to properly fulfill all services specified in this contract. Personnel shall respond and report on-site within twenty-four hours after receiving a request for service from the Project Officer or his/her Alternate. All work performed under this contract shall be accomplished by skilled specialists who have previous training and experience on cage wash equipment maintenance and repairs. In jurisdictions that require licensing for the work being performed under this contract all contractor personnel that are involved in such work must be licensed by the state and local government. Equipment and Components Removal for Repair: In the event pumps, motors or other components are required to be sent out for repairs, the Contractor shall obtain prior approval from the Project Officer or his or her alternate. The Project Officer or his/her Alternate shall assist the contractor in obtaining a properly executed Repair Pass prior to removal of any Government owned equipment from NIH premises. (Contract staff working in animal facilities are not authorized to issue a Repair Pass.)The Contractor shall be responsible for the return of the equipment to the original location on NIH property. ARTICLE REPORTING REQUIREMENTS : Item Cross Reference to Quantity Time of Delivery Section C. Page Temperature Test 3 1 5 days after PM Inspection (for normal readings. Immediately if readings are outside the ranges as specified on p.3, C.2.2.2 PH Test 3 1 5 Days after PM Inspection PM Inspection Report 3 1 5 Days after PM Inspection Emergency Telephone Roster 4 1 Within one day of contract award and within one day of any personnel change. Field Service Report 4 2 5 Days after repair service Reports shall be sent to the Project Officer at 14 Service Rd South, Bethesda, MD, 20892. However, if anyother interested parties believes that they meet the requirements please submit a statement of capabilities. The capability statement and any other information furnished must be in writing and must contain material in sufficient detail to allow NIH to determine if the parties can meet all of the foregoing requiremts. Capability statements and related material must be received in this office by 2:00 pm EDT on the closing date of this announcement. If you have any questions please contact Doris Vaughn at 301-402-3351 or by e-mail at vaughndl@od.nih.gov.
- Place of Performance
- Address: 9000 Rockville Pike, Bethesda, Md
- Zip Code: 20892
- Country: UNITED STATES
- Zip Code: 20892
- Record
- SN01402085-W 20070913/070911220423 (fbodaily.com)
- Source
-
FedBizOpps Link to This Notice
(may not be valid after Archive Date)
| FSG Index | This Issue's Index | Today's FBO Daily Index Page |