MODIFICATION
17 -- F-22 Tail Maintenance Stands
- Notice Date
- 9/14/2007
- Notice Type
- Modification
- NAICS
- 336413
— Other Aircraft Parts and Auxiliary Equipment Manufacturing
- Contracting Office
- Department of the Air Force, Pacific Air Forces, 3 CONS - Elmendorf, 10480 22nd Street, Elmendorf AFB, AK, 99506-2500, UNITED STATES
- ZIP Code
- 99506-2500
- Solicitation Number
- Reference-Number-F1W2E47178AQ01
- Response Due
- 9/19/2007
- Archive Date
- 10/9/2007
- Point of Contact
- Sean Crowe, Contract Administrator, Phone 907-552-4146, Fax 907-552-7496,
- E-Mail Address
-
sean.crowe@elmendorf.af.mil
- Description
- THIS IS A COMBINED SYNOPSIS/SOLICITATION FOR COMMERCIAL ITEMS PREPARED IN ACCORDANCE WITH THE FORMAT IN FAR SUBPART 12.6-STREAMLINED PROCEDURES FOR EVALUATION AND SOLICITATION FOR COMMERCIAL ITEMS-AS SUPPLEMENTED WITH ADDITIONAL INFORMATION INCLUDED IN THIS NOTICE. THIS ANNOUNCEMENT CONSTITUTES THE ONLY SOLICITATION; PROPOSALS ARE BEING REQUESTED, AND A WRITTEN SOLICITATION DOCUMENT WILL NOT BE ISSUED. This is a solicitation of Purchase Request F1W2E47187AQ01 and is issued as a Request for Proposal (RFP). The solicitation document and incorporated provisions and clauses are those in effect through Federal Acquisition Circular (FAC) 2005-19. The associated North American Industrial Classification System (NAICS) code for this procurement is 336413 with a small business size standard of 1000 employees. This acquisition is NOT set aside for small businesses. All responsible Contractors shall provide a proposal for the following: This is a commercial request for four (4) hydraulically adjustable F-22 aircraft maintenance stands. The stand is to be mechanically adjustable using one hydraulic cylinder to support and raise the stand while locking pins from the platform can be removed and replaced in new hole locations to change deck height. The height shall be adjustable from the stand platform. The stand platform will rise with the angle of the tail to access the outboard vertical stabilizers from lower limit to upper limit without moving the stand. The platform shall be able to move from side to side to accomodate both sides of the aircraft. Base frame, stand and ladder structure constructed of square and rectangular steel tubing. Structural steel tubing used to make up sections of the ladders. The rungs, steps, and stand surfaced with anti-skid planks. Outboard stand sides provided with adjustable guardrails and handrails. Stand provided with polyurethane treaded wheels, 8-inch casters, and swivel style casters with swivel locks and wheel brakes. Polyurethane tread wheels used to extend the wheel life if exposed to "Skydrol" type fluids. Require an A-frame towbar with a large I.D. hitch eye for long distance movement. Also use towbar for easy movement for hand positioning. Towbar required to be folded upward for storage. Casters mounted at either end of the leg sets located under the deck frames. The area the stand will be required to work in is ten (10) feet. When in use the stand can be longer than ten (10) feet. The stand must also be able to be transported in the ten (10) foot area. The stand shall be designed to be trasportable by aircraft. Design stand and manufacture to assure that it is in compliance with OSHA (Occupational Safety and Health Act) standards per 29 CFR 1910. For safety precautions design stand so that any single point of failure under normal conditions, or the failure of a component, in normal use will not put personnel at risk. This will include all equipment, which does or could (a) support, (b) carry, (c) hold, or (d) guard personnel in such a way that provides protection from hazards. Daily inspections need to be simple and a check list established and attached to the stand. Develop a training plan for stand operation, inspection, and safety. Stand color should stand out from aircraft (i.e. yellow, white). A. PLATFORM SIZE 60in x 120in B. STAIR WIDTH 24in C. STAIR DEPTH 10in D. OVER ALL LENGTH 184in E. OVER ALL HEIGHT 1. LOWERED 135in 2. RAISED 172in F. OVER ALL WIDTH 144in G. RUNG SPACING 12in CAPABILITIES AND LIMITS: A. STAND CAPACITY (MAIN DECK) 600 POUNDS B. RUNG CAPACITY 350 POUNDS C. TOWING SPEED 5 MPH D. FUNCTIONAL ON SLOPE 5 DEGREE LEVEL FLOOR Delivery shall be FOB Destination. Requests for site visits are to be submitted to SrA Sean Crowe. The full text of a FAR provision or clause may be accessed electronicall Items; 52.212-3 Offerors Representations and Certifications- Commercial Items. Offerors must complete annual representations and certifications on-line at http://orca.bpn.gov in accordance with FAR 52.212-3 Offerors Representations and Certifications- Commercial Items. If paragraph (j) of the provision is applicable, a written submission is required. The following clauses apply to this acquisition: 52.204-7, Central Contractor Registration; 52.212-4, Contract Terms and Conditions Commercial Items; 52.212-5 (Dev), Contract Terms and Conditions Required to Implement Statutes or Executive Orders Commercial Items including subparagraphs: 52.219-28, Post-Award Small Business Program Representation; 52.222-3, Convict Labor; 52.222-19, Child Labor Cooperation With Authorities And Remedies; 52.222-21, Prohibition of Segregated Facilities; 52-222-26, Equal Opportunity; 52.222-35 Equal Opportunity for Special Disabled Veterans; 52.222-36, Affirmative Action for Workers with Disabilities; 52.222-37, Employment Reports on Special Disabled Veterans, Veterans of the Vietnam Era, and Other eligible Veterans; 52.225-3, Buy American Act - Free Trade Agreements - Israeli Trade Act- Alternate (I); 52.225-13 Restriction on Certain Foreign Purchases and 52.232-33, Payment by Electronic Funds Transfer-Central Contractor Registration. 252.225-7001, Buy American Act and Balance of Payments Program; 252.225-7036, Buy American--Free Trade Agreement--Balance of Payments Program; 252.232-7003, Electronic Submission of Payment Requests; 252.247-7023, Transportation of Supplies by Sea; 252.247-7023 Alt III, Transportation of Supplies by Sea; 252.212-7001 (Dev), Contract Terms and Conditions Required to Implement Statutes or Executive Orders Applicable to Defense Acquisitions of Commercial Items. Potential contractors must be registered in the Central Contractor Registry (CCR) to be eligible for award. The CCR internet web site is http://www.ccr.gov. Offerors are advised to include a completed and/or updated online provisions Representation and Certifications Application (ORCA) located at http://orca.bpn.gov and submit with quote. To request additional information contact SrA Sean Crowe at (907) 552- 4146, or by e-mail at sean.crowe@elmendorf.af.mil. Offers are due by 19 September 2007, 4:00 PM, Alaska Standard Time. Submit offers via fax to (907) 552-7496 or email to sean.crowe@elmendorf.af.mil. NOTE: THIS NOTICE WAS NOT POSTED TO FEDBIZOPPS ON THE DATE INDICATED IN THE NOTICE ITSELF (14-SEP-2007); HOWEVER, IT DID APPEAR IN THE FEDBIZOPPS FTP FEED ON THIS DATE. PLEASE CONTACT fbo.support@gsa.gov REGARDING THIS ISSUE.
- Web Link
-
Link to FedBizOpps document.
(http://www.fbo.gov/spg/USAF/PAF/3CS/Reference-Number-F1W2E47178AQ01/listing.html)
- Place of Performance
- Address: 11525 Slammer Avenue Elmendorf AFB, AK
- Zip Code: 99506
- Country: UNITED STATES
- Zip Code: 99506
- Record
- SN01408314-F 20070916/070915205521 (fbodaily.com)
- Source
-
FedBizOpps Link to This Notice
(may not be valid after Archive Date)
| FSG Index | This Issue's Index | Today's FBO Daily Index Page |