SOURCES SOUGHT
23 -- Six (6) wheel heavy-duty trailer chassis. The trailer chassis shall be a Knowles model TB 450-123 or equivalent.
- Notice Date
- 10/19/2007
- Notice Type
- Sources Sought
- NAICS
- 336212
— Truck Trailer Manufacturing
- Contracting Office
- TACOM - Anniston, Directorate of Contracting, ATTN: AMSTA-AN-CT, Building 221, 7 Frankford Avenue, Anniston, AL 36201-4199
- ZIP Code
- 36201-4199
- Solicitation Number
- W911KF08S0001
- Response Due
- 10/29/2007
- Archive Date
- 12/28/2007
- Point of Contact
- Sandra Turner, 256 235-7346
- E-Mail Address
-
Email your questions to TACOM - Anniston, Directorate of Contracting
(sandra.e.turner@us.army.mil)
- Small Business Set-Aside
- N/A
- Description
- This is a request for information only. It is not a solicitation. A drawing is available upon request. Please submit product information, brochures, etc. to Sandra Turner, Small Business Specialist, Anniston Army Depot at sandra.e.turner@us.army.m il. Six (6) wheel heavy-duty trailer chassis. The trailer chassis shall be a Knowles model TB 450-123 or equivalent which shall meet or exceed the following requirements: 1. The trailer chassis shall have a minimum capacity of 45,000 pounds at speeds less than 25 mph. 2. The trailer chassis shall be equipped with springs or a rocking bolster to minimize frame stress when traveling over uneven ground. 3. The trailer shall be equipped with heavy-duty taper roller bearing hubs that have 8 studs on an 8-inch diameter bolt circle. The studs shall be 5/8-inch diameter. The hub pilot shall be 6 inches diameter. 4. The trailer chassis shall be equipped with tandem rear walking beam type rear suspension. 5. The trailer chassis tongue shall be equipped with a four-bolt hitch flange to accept a standard pintle ring type hitch. The standard bolt on pintle ring has four ? inch diameter holes on a 4.5 inch square pattern. 6. The trailer chassis shall come with an 80 to 90 inch tongue length. 7. The trailer tongue shall be spring loaded to maintain 8 to 12 inches ground clearance at the hitch flange when not hooked to a tow tractor. 8. The trailer chassis shall have automotive type steering. 9. The trailer chassis shall be equipped with 6 each 8.25 x 15, twelve ply industrial tires and wheels. Minimum load capacity for each wheel, tire, and hub assembly shall be 8,000 pounds. Each tire and wheel assembly shall be mounted and filled solid wi th foam type flat proofing tire compound. 10. The trailer shall be equipped with bolster stakes. The bolster width shall be 85 to 86 inches.
- Place of Performance
- Address: TACOM - Anniston, Directorate of Contracting ATTN: AMSTA-AN-CT, Building 221, 7 Frankford Avenue Anniston AL
- Zip Code: 36201-4199
- Country: US
- Zip Code: 36201-4199
- Record
- SN01437821-W 20071021/071019224237 (fbodaily.com)
- Source
-
FedBizOpps Link to This Notice
(may not be valid after Archive Date)
| FSG Index | This Issue's Index | Today's FBO Daily Index Page |