SOLICITATION NOTICE
58 -- CONVERTER,SIGNAL DA
- Notice Date
- 2/4/2008
- Notice Type
- Solicitation Notice
- NAICS
- 334290
— Other Communications Equipment Manufacturing
- Contracting Office
- DEPARTMENT OF THE AIR FORCE; 518 CBSS PKF;6050 GUM LANE BLDG 1215; HILL AIR FORCE BASE; UT; 84056
- ZIP Code
- 84056
- Solicitation Number
- FA8212-08-R-74176
- Response Due
- 3/25/2008
- Archive Date
- 6/18/2008
- Point of Contact
- Denny H Mansell, Phone 801-586-1231, Fax 801-777-0389, Email denny.mansell@hill.af.mil
- E-Mail Address
-
Email your questions to Denny Mansell
(denny.mansell@hill.af.mil)
- Small Business Set-Aside
- N/A
- Description
- PR Number(s): FD20200874176 Item: 0001 NSN: 5895014587537WFWF CONVERTER,SIGNAL DA P/N: 626-202C, P/N: 16VE585-3, Description: CONVERTER,SIGNAL DATA|NOT RATED|F-16C/D COMMON BLOCK 30/40/50|1 RECTANGULAR OR SQUARE|ENCASED|MECHANICAL|SOLID STATE Total Line Item Qty: 0.0000 EA Applicable to: F-16 PR Number(s): FD20200874176, FD202074176 Item: 0001AA Description: "DATA IAW ATTACHED DD FORM 1423 EXHIBIT A." Total Line Item Qty: 1.0000 MM Destn: FMS COUNTRIES. Delivery - ARO Months: 04, 1.00 MM PR Number(s): FD20200874176 Item: 0001AB Description: Total Line Item Qty: 1.0000 EA Destn: FMS COUNTRIES. Delivery - ARO Months: 04, 1.00 EA PR Number(s): FD20200874176 Item: 0001AC Description: Total Line Item Qty: 42.0000 EA Destn: FMS COUNTRIES. Delivery - ARO Months: 04, 42.00 EA PR Number(s): FD20200774266 Item: 0001AD Description: Total Line Item Qty: 20.0000 EA Destn: FMS COUNTRIES. Delivery - ARO Months: 04, 20.00 EA Plus 0002 additional items Electronic procedure will be used for this solicitation. This solicitation is combined with solicitation FA8212-07-Q-74166. To: MPC PRODUCTS CORPORATION, SKOKIE, IL.,60077-3290. To: LOCKHEED MARTIN CORPORATION, FORT WORTH, TX.,76108-0000. Authority: 10 U.S.C. 2304(C)(1), Justification: Supplies (or Services) required are available from only one or a limited number of responsible source(s) and no other type of supplies or services will satisfy agency requirements. It is suggested that small business firms or others interested in subcontracting opportunities in connection with the described procurement make contact with the firm(s) listed. Specifications, plans, or drawings relating to the procurement described are incomplete or not available and cannot be furnished by the Government. Award will be made only if the offeror, the product/service, or the manufacturer meets qualification requirements at the time of award in accordance with FAR clause 52.209-1. The solicitation identifies the office where additional information can be obtained concerning qualification requirements are cited in each individual solicitation. All responsible sources may submit a bid, proposal, or quotation which shall be considered by the agency. This part must be acquired from a manufacturing sources(s) specified on a source control or selected item drawing as defined by the current version of DoD-STD-100. Suitable technical data, government data rights, or manufacturing knowledge are not available to permit acquisition from other sources, nor qualification testing of another part, nor use of a second source part in the intended application. Although, by DoD-STD-100 definition, altered and selected items shall have an adequate technical data package, data review discloses that required data or data rights are not in Government possession and cannot be economically obtained. This part required engineering source approval by the design control activity in order to maintain the quality of the part. Existing unique design capability, engineering skills, and manufacturing knowledge by the qualified source(s) require acquisition of the part from the approved source(s). The approved source(s) retain data rights, manufacturing knowledge, or technical data that are not economically available to the Government, and the data or knowledge is essential to maintaining the quality of the part. An alternate source must qualify in accordance with the design control activity's procedures, as approved by the cognizant Government engineering activity. The qualification procedures must be approved by the Government engineering activity having jurisdiction over the part in the intended application. The data needed to acquire this part competitively is not physically available, it cannot be obtained economically, nor is it possible to draft adequate specifications or any other adequate, economical description of the material for competitive solicitation. The Government physically does not have in its possession sufficient, accurate, or legible data to purchase this part from other than the current source(s). The rights to use the data needed to purchase this part from additional source(s) are not owned by the Government and cannot be purchased, developed, or otherwise obtained. It is uneconomical to reverse engineer this part. The Government does not own the data or the rights to the data needed to purchase this part from additional sources. It has been determined to be uneconomical to buy the data or rights to the data. It is uneconomical to reverse engineer the part. . See Note(s) 25 and 26.
- Record
- SN01499544-W 20080206/080205050759 (fbodaily.com)
- Source
-
FedBizOpps Link to This Notice
(may not be valid after Archive Date)
| FSG Index | This Issue's Index | Today's FBO Daily Index Page |