MODIFICATION
Y -- FY08 Railroad Upgrade, Fort Lewis, Washington
- Notice Date
- 2/15/2008
- Notice Type
- Modification
- NAICS
- 237990
— Other Heavy and Civil Engineering Construction
- Contracting Office
- US Army Engineer District, Seattle, ATTN: CENWS-CT, PO Box 3755, Seattle, WA 98124-3755
- ZIP Code
- 98124-3755
- Solicitation Number
- W912DW-08-R-0024
- Response Due
- 3/21/2008
- Archive Date
- 5/20/2008
- Point of Contact
- erik.lundstrom, 206.764.6698
- E-Mail Address
-
Email your questions to US Army Engineer District, Seattle
(erik.a.lundstrom@usace.army.mil)
- Small Business Set-Aside
- N/A
- Description
- Modification 1: Response date changed Please contact Dawn Hickman at Dawn.R.Hickman@nws02.usace.army.mil or 206-764-6575 for any questions regarding this project. The Seattle District Corps of Engineers has a competitive requirement for c onstruction services on a project titled, FY08 Railroad Upgrade, Fort Lewis, Washington. The project consists of constructing a facility that provides the following: 1) Expansion of the Interchange (IC) Yard in the Logistics Center, both widenin g and lengthening. The design removes a total of 4 existing tracks on the south side and adds 3 new tracks on both the north and south sides of the main lines, for a total of 6 new lines, presently serving Ft. Lewis. Total additional track in the IC Yard area amounts to approximately 10,200 linear feet of track, ties and ballast as well as associated crossovers, highway grade crossing and all site work associated with the expansion of the IC Yard. A gravel maintenance road is to be provided on both he no rth and south sides of the IC Yard. New exterior lighting and fencing will be provided on the most of the perimeter of the new yard. 2) To accommodate expansion of the IC yard, East Lincoln Road and its rail crossing must be diverted and extende d around the new yard. A sweeping S-curve alignment will be replicated approximately 1,200 feet east of the existing location. The new road will include two 12-foot pavement sections and 4-foot gravel shoulders. Normal pavement markings and signage ar e included, but only crossbuck signs at the rail crossing will be provided, without additional signalization. 3) Construction of a new Locomotive Maintenance Facility (LMF) of approximately 5,800 square feet. (Demolition of the existing LMF will be accomplished under separate contract.) The new enclosed facility will provide maintenance and storage space for three locomotives along with a small office/breakroom space. Approximately 800 linear feet of track, ties and ballast along with turnouts a re associated with the new entrance to the LMF from the IC lead tracks. Track design follows the basic BNSF design of 12-foot shoulders, walkway ballast and drainage ditches on either side. The rail design also incorporates a 2-panel at-grade crossing on the east side of the building. Shop equipment includes a 7.5-ton bridge crane, storage and pumps for lubricants and glycol, an air compressor, welding equipment, storage shelves, and a small exterior hazardous materials storage building for lubricants an d glycol. The LMF will house the following spaces: a small office area, tool/janitor area, bathroom with shower, electrical and communications closets, the shop area (4900 sq. ft.) with a below-ground-surface maintenance pit for one locomotive space and s everal large overhead coiling doors. The concrete slab is reinforced in the shop area for jacking a 120-ton locomotive. The mechanical design incorporates high-intensity infrared heaters for the shop area and a split system, air-source heat pump for the small office/break room. Fans and louvers provide summer ventilation and incorporate sensors and controls to exhaust fumes generated during short-duration operation of locomotives. Roof is standing-seam metal, siding is metal with low-wall brick veneer. Windows utilize laminated glass. Building will be sprinklered with a wet-pipe system. Construction means, methods and materials will result in a LEED-NC rating of silver on the LMF building. 4) Utility runs to the LMF include domestic and fire water supply, electrical power, copper and fiber optic communication lines and stormwater management facilities. Electrical service includes relocation of overhead to underground service a distance of approximately 2400 feet, including some additional ma nholes and concrete-encased raceway under roadways, connecting to a 225 kVA transformer outside the LMF, pad mounted on a concrete vault. Some steel casing of lines beneath railroad track is required. Sanitary Sewer service includes provision of a duplex grinder pump station and 2,240 feet of 1?-inch forced main and approximately 120-feet of 4-inch gravity main. Water service will be provided by extension of a n 8-inch ductile iron main approximately 1,175 feet to the LMF site. Stormwater facilities include a bioinfiltration facility receiving sheet flow and piped roof drainage. Grade requirements may force importation of as much as 89,000 yards of suitable fi ll. Unsuitable soils removal could amount to approximately 42,000 yards, emanating from approximately 1? feet of unsuitable material removal from the top of previously undeveloped areas. The estimated construction cost range is $10,000,000-25,000,0 00 and the performance period is estimated at 365 calendar days. The NAICS code for this project is 237990. The solicitation will be a unrestricted competitive request for proposal utilizing the Lowest Price Technically Acceptable source selection proces s resulting in award of one fixed-price contract in accordance with Federal Acquisition Regulation (FAR) Part 15. This first phase of the solicitation will be issued in electronic format only on FedTeDS at http://www.fedteds.gov/fedteds/start.nsf/frm.Vendo rLogin?OpenForm&SolicitationNumber=W912DW-08-R-0024 on or about 20 February 2008. NO CD's OR HARD COPIES WILL BE AVAILABLE. Offerors are responsible for checking the referenced page for any update(s) to the notice. The Government is not responsible for a ny loss of Internet connectivity or for an offerors inability to access the document posted at the referenced website. To get automatic notifications of updates to this solicitation, you MUST click the Register to Receive Notifications button in the listi ng for this solicitation on FedBizOpps and fill in your email address.? If you want to list your firm so others can see you are an interested vendor, you must click the Register as Interested Vendor button in the listing for this solicitation on FedBizOpps and fill in your information; you can show Prime/Sub/Supplier in one of the address or POC lines.? Project is open to both large and small business. If you are a large business and your bid or proposal will exceed $1 million, you will be required to submit a subcontracting plan with goals for small business (SB), historically underutilized business zone (HUBZone), small disadvantaged business (SDB), woman-owned small business (WOSB), veteran-owned small business (VOSB), and service disabled vetera n-owned small business (SDVOSB) concerns. For the purposes of this procurement, a concern is considered a small business if its annual average gross revenue, taken for the last 3 fiscal years, does not exceed $31 million. For additional Seattle District C ontracting opportunities, visit the Army Single Face to Industry at https://acquisition.army.mil/asfi/sol_list.cfm?pContractOfcID=165 and also see the FedBizOpps postings at http://www2.fbo.gov/spg/USA/COE/DACA67/postdateToday_1.html.
- Place of Performance
- Address: US Army Engineer District, Seattle ATTN: CENWS-CT, PO Box 3755 Seattle WA
- Zip Code: 98124-3755
- Country: US
- Zip Code: 98124-3755
- Record
- SN01510390-W 20080217/080215230953 (fbodaily.com)
- Source
-
FedBizOpps Link to This Notice
(may not be valid after Archive Date)
| FSG Index | This Issue's Index | Today's FBO Daily Index Page |