SOLICITATION NOTICE
J -- Drydock repairs to USCGC Pendant (WYTL-65608)
- Notice Date
- 3/7/2008
- Notice Type
- Solicitation Notice
- NAICS
- 336611
— Ship Building and Repairing
- Contracting Office
- Department of Homeland Security, United States Coast Guard (USCG), Commanding Officer (vpl), USCG Maintenance and Logistics Command - Atlantic, 300 East Main Street Suite 600, Norfolk, VA, 23510-9102, UNITED STATES
- ZIP Code
- 00000
- Solicitation Number
- HSCG80-08-Q-3FAD80
- Response Due
- 4/17/2008
- Archive Date
- 3/7/2009
- Point of Contact
- Beverly Garner, Contract Specialist, Phone (757) 628-4663, Fax (757) 628-4676
- E-Mail Address
-
Beverly.A.Garner@uscg.mil
- Small Business Set-Aside
- Total Small Business
- Description
- The U.S. Coast Guard is setting aside this acquisition for Small Business concerns. The NAICS Code is 336611 and the small business standard is less than 1,000 employees. This acquisition will be issued as an Request for Quotes (RFQ) on or about March 27, 2008 via the Federal Business Opportunities (FEDBIZOPPS) web page at www.eps.gov with quotes due on or about April 17, 2008. The government reserves the right to cancel this solicitation, either before or after the quote opening or closing date. Hard copies of the specification and solicitation will not be issued. A CD-ROM containing all applicable drawings is available free of charge to contractors upon request not later than three (3) days from the bid opening. The CD-ROM(s) contain WINDOWS compliant raster/vector formats (e.g.*.DWF, etc).The acquisition is for drydock repairs to the USCGC PENDANT (WYTL 65608), a 65 foot class Harbor Tug, at the contractors facility. The vessel availability is for approximately forty (40) calendar days, starting on or about July 14, 2008. This drydock availability is geographically restricted to 144 nautical miles from its homport of Boston, MA. The scope of this acquisition is for repairs of various items aboard the USCGC PENDANT (WYTL 65608). The work will include, but is not limited to welding repairs, clean and inspect fuel and oil tanks, remove and dispose of fuel, remove and dispose of additional oil and oily water, clean and inspect sewage and grey water collection and holding tanks, remove, inspect and reinstall propeller shafts, clean, inspect, and test grid coolers, Renew transducer and preserve transducer hull ring, inspect and test air receiver and relief valve, remove, inspect, and reinstall rudder assemblies, renew upper carrier bearing assembly and seals, renew rudder lower bearing assembly, renew rudder pintle bearing assembly, renew potable water tank, preserve sewage holding tank, preserve sewage tanks, prepare and prime weather decks, preserve underwater body, coating system visual inspection, coating system thickness testing, painting of draft marks, renew cathodic protection system, routine drydocking, provide temporary logistics, ultrasonic thickness measurements, UT shots, clean sewage and grey water piping system, preserve fuel tanks, renew propeller shaft, renew door, renew t-framing, reseal windows, weld repair pilot house, perform RHI crane maintenance, perform maintenance on winch davit, renew winch davit, renew wire rope, and replace deck drain. All welding and brazing shall be accomplished by trained welders who have been certified by the applicable regulatory code performance qualifications procedures. Questions may be addressed to Beverly Garner, Contract Specialist at (757) 628-4663or via email beverly.a.garner@uscg.mil .
- Place of Performance
- Address: Contractor facility
- Zip Code: 00000
- Country: UNITED STATES
- Zip Code: 00000
- Record
- SN01526845-W 20080309/080307223602 (fbodaily.com)
- Source
-
FedBizOpps Link to This Notice
(may not be valid after Archive Date)
| FSG Index | This Issue's Index | Today's FBO Daily Index Page |