Loren Data's SAM Daily™

FBO DAILY ISSUE OF APRIL 02, 2008 FBO #2319
SOLICITATION NOTICE

51 -- Toolkits for equipment repair

Notice Date

3/31/2008
 

Notice Type

Solicitation Notice
 

NAICS

452990 — All Other General Merchandise Stores
 

Contracting Office

Department of the Air Force, Air Combat Command, 20 CONS, 321 Cullen St Bldg 216, Shaw AFB, SC, 29152-5004, UNITED STATES
 

ZIP Code

29152-5004
 

Solicitation Number

FA4803-08-Q-A156
 

Response Due

4/7/2008
 

Archive Date

4/22/2008
 

Point of Contact

John Dix, Contracting Specialist, Phone 803-895-5341, Fax 803-895-5339, - Randall May, Contracting Officer , Phone 803-895-5408, Fax 803-895-5339
 

E-Mail Address

john.dix@us.af.mil, randall.may@shaw.af.mil
 

Small Business Set-Aside

Service-Disabled Veteran-Owned
 

Description

This is a combined synopsis/solicitation for commercial items prepared in accordance with the format in Subpart 12.6, as supplemented with additional information included in this notice. This announcement constitutes that only solicitation, proposals are being requested and a written solicitation will not be issued. The solicitation number for this procurement is FA4803-08-Q-A156 and is issued as a Request for Quotation (RFQ). This solicitation document and incorporated provisions and clauses are those in effect through the Federal Acquisition Circular (FAC) 2005-18, Defense Federal Acquisition Regulation Supplement Change Notice (DCN) 20050913 and Air Force Acquisition Circular (AFAC) 2005-0818. For informational purposes the North American Industry Classification System code is 452990 All Other General Merchandise Stores. This acquisition is 100% set-aside for Service Disabled Veteran Owned Small Business Preference. This is a firm-fixed price procurement and will be procured using commercial item procedures and award selection will be made base on price. Requirement is for: Line Item 0001) (72) Toolkits to include the following listed items: Item Description TA3 Adaptor, 1/4" Internal drive x 3/8" External drive, 15/16" GSAF1E Adaptor, Industrial Finish, 1/2" Internal drive x 3/8" External drive, 1 1/2" GFAT1E Adaptor, 3/8" Internal drive x 1/4" External drive, 1 1/4" A2A Adaptor, 3/8" Internal drive x 1/2" External drive, 1 5/16" F4LBK Speeder, Comfort Knob, 16 5/8" ATIT4A1 TORQ BIT ATIT6A1 TORQ BIT ATIT8A1 TORQ BIT ATIT10A1 TORQ BIT SDM221IRB Bit, PHILLIPS? ACR?, #1 SDM222IRB Bit, PHILLIPS? ACR?, #2 SDM2709D Bit, Hex, 9/64" TMBS8A Socket, Bit, Magnetic, 1/4" drive (For 1/4" hex bits) FBS8 Socket, Bit, 3/8" drive (For 1/4" hex bits) TMU8B Universal Joint, Friction Ball, 1 1/8" FU8A Universal Joint, Friction Ball, 1 15/16" TESU8 Socket, Spline, Universal, Shallow, #8, 1/4" Hex TESU10 Socket, Spline, Universal, Shallow, #10, 5/16" Hex T72 72 TOOTH STD HANDLE RATCHET F80 80 TOOTH 3/8IN DRIVE RATCHET TMD6 Socket, Shallow, 3/16", 12-Point TMD7 Socket, Shallow, 7/32", 12-Point TMD8 Socket, Shallow, 1/4", 12-Point TMD10 Socket, Shallow, 5/16", 12-Point TMD12 Socket, Shallow, 3/8", 12-Point TMD14 Socket, Shallow, 7/16", 12-Point TES7 Socket, Spline, Shallow, #7, 7/32" Hex TES8 Socket, Spline, Shallow, #8, 1/4" Hex TES10 Socket, Spline, Shallow, #10, 5/16" Hex TES12 Socket, Spline, Shallow, #12, 3/8" Hex TES14 Socket, Spline, Shallow, #14, 7/16" Hex STMD6 Socket, Deep, 3/16", 12-Point STMD7 Socket, Deep, 7/32", 12-Point STMD8 Socket, Deep, 1/4", 12-Point STMD10 Socket, Deep, 5/16", 12-Point STMD12 Socket, Deep, 3/8", 12-Point STMD14 Socket, Deep, 7/16", 12-Point STMD16 Socket, Deep, 1/2", 12-Point F121 Socket, Shallow, 3/8", 12-Point F141 Socket, Shallow, 7/16", 12-Point F161 Socket, Shallow, 1/2", 12-Point F181 Socket, Shallow, 9/16", 12-Point F201 Socket, Shallow, 5/8", 12-Point F221 Socket, Shallow, 11/16", 12-Point F241 Socket, Shallow, 3/4", 12-Point FES120 Socket, Spline, Shallow, #12, 3/8" Hex FES140 Socket, Spline, Shallow, #14, 7/16" Hex FES160 Socket, Spline, Shallow, #16, 1/2" Hex FES180 Socket, Spline, Shallow, #18, 9/16" Hex FES200 Socket, Spline, Shallow, #20, 5/8" Hex SES181 Socket, Spline, Shallow, #18, 9/16" Hex SES201 Socket, Spline, Shallow, #20, 5/8" Hex SES221 Socket, Spline, Shallow, #22, 11/16" Hex SES241 Socket, Spline, Shallow, #24, 3/4" Hex SW221 Socket, Shallow, 11/16', 12-Point SW241 Socket, Shallow, 3/4", 12-Point SW261 Socket, Shallow, 13/16", 12-Point SW281 Socket, Shallow, 7/8", 12-Point SW301 Socket, Shallow, 15/16", 12-Point SW321 Socket, Shallow, 1", 12-Point SF121 Socket, Deep, 3/8", 12-Point SF141 Socket, Deep, 7/16", 12-Point SF161 Socket, Deep, 1/2", 12-Point SF181 Socket, Deep, 9/16", 12-Point SF201 Socket, Deep, 5/8", 12-Point SF221 Socket, Deep, 11/16", 12-Point SF241 Socket, Deep, 3/4", 12-Point FXK6 Extension, Knurled, Friction Ball, 6" FXK3 Extension, Knurled, Friction Ball, 3" TMXK2 Extension, Knurled, 2" TMXK4 Extension, Knurled, 4" FXK11 Extension, Knurled, Friction Ball, 11" TMXK140 Extension, Knurled, 14" FCO22A Wrench, Crowfoot, Open End, 11/16" FCO24A Wrench, Crowfoot, Open End, 3/4" FCO28A Wrench, Crowfoot, Open End, 7/8" FC36A Wrench, Crowfoot, Open End with Side Lock, 1 1/8" FC44A Wrench, Crowfoot, Open End with Side Lock, 1 3/8" FC48A Wrench, Crowfoot, Open End with Side Lock, 1 /12" VS24B Wrench, Open End, 4-Way Angle Head, 3/4" VO2428B Wrench, Open End, Standard Length, 3/4"-7/8" XDES1214A Wrench, Spline, Box, Angle Head, #12-#14, 3/8"-7/16" Hex XDES810A Wrench, Spline, Box, Angle Head, #8-#10, 1/4"-5/16" Hex OES8B Wrench, Spline, Combination, Short, #8, 1/4" Hex OES10B Wrench, Spline, Combination, Short, #10, 5/16" Hex OES12B Wrench, Spline, Combination, Short, #12, 3/8" Hex OES14B Wrench, Spline, Combination, Short, #14, 7/16" Hex OES16B Wrench, Spline, Combination, Short, #16, 1/2" Hex OES18B Wrench, Spline, Combination, Short, #18, 9/16" Hex OES20B Wrench, Spline, Combination, Short, #20, 5/8" Hex OES22B Wrench, Spline, Combination, Short, #22, 11/16" Hex OES24B Wrench, Spline, Combination, Short, #24, 3/4" Hex LTA3032 Wrench, Open End, Low-Torque Slimline, 15? Offsets, 15/16"-1" RES810C Wrench, Spline, Ratcheting Box, #8-#10, 1/4"-5/16" Hex RES1214C Wrench, Spline, Ratcheting Box, #12-#14, 3/8"-7/16" Hex RES1820C Wrench, Spline, Ratcheting Box, #18-#20, 9/16"-5/8" Hex HBBD16 Hammer, Dead Blow, Ball Peen, 16 oz. VP7WR Pliers, VISE-GRIP?, Locking, Curved Jaw w/Wire Cutter, 1 5/8" capacity VP6LN Pliers, VISE-GRIP?, Locking, Long Nose w/Wire Cuttter, 2 1/4" capacity 196CF LONG NOSE W/CUTTER PIT120 Driver, Impact 86CF Cutters, Diagonal, Vinyl Grips, 6 3/8" 388CF HIGH LEVERAGE CUTTER WT11B Wire Twister/Cutter, .041" cap, 8 1/2" long RULER600 Rule, Steel, 6" PTM157 Mirror, Pocket, Oval, 17" extension (Mirror: 1" x 2") GA295 Mirror, Round, 14" extension (Mirror: 2 1/4" Diameter) YASG153 Rule, Tape, U.S., 12' GA599 Gauge, Tread Depth FB325A Gauge, Feeler, U.S./Metric, 25 blades (.0015" thru .025") PT28E Pick-up Tool SHD6O HARD GRIP SD SHD4O HARD GRIP SD SHD304O HARD MINI SLOTTED SCRWDRVR ORG SHD1O ORANGESTUBBY SHDP82O HARD GRIP INSTINCT PHILLIPS DR SHDP42IRO HARD GR PHILLIPS SHDP31IRO HARD GR PHILLIPS SHDP300O HARD MINI PHILIPS SCRWDRVR ORG SHDP22IRO NO.2 ORANGE STUBBY SGDMRCE44 Screwdriver, Ratcheting, 5-Position Handle, Red SGCP1BR INSTINCT COTTER PIN PULLER BHS13A Set, Wrench, L-Shape, Ball Hex, Standard (13 pcs.) (.050" to 3/8') YA339 Scribe, Straight End/90? End GOGGLE1 Goggles, Protective GLA72A Adaptor, 3/4" Internal drive x 1" External drive, 2 5/8" GLA12B Adaptor, 1/2" Internal drive x 3/4" External drive, 1 7/8" GLAS1E Adaptor, 3/4" Internal drive x 1/2" External drive, 2 7/16" S321 Socket, Deep, 1", 12-Point S361 Socket, Deep, 1 1/8", 12-Point LES302NP #30 SPL SHAL SK LES383 Socket, Spline, Shallow, #38, 1-3/16" Hex LDH562 Socket, Shallow, 1 3/4", 12-Point TW341 Socket, Shallow, 1 1/16", 6-Point S936 Ratchet, Sealed Head (High Strength), Standard Handle, 10 5/16" SN18B Breaker Bar, 18" L8112A Head, Breaker Bar, 15/16" handle hole MTF89311 ADJ AUTO WRENCH FCO12A Wrench, Crowfoot, Open End, 3/8" FCO14A Wrench, Crowfoot, Open End, 7/16" FCO16A Wrench, Crowfoot, Open End, 1/2" FCO18A Wrench, Crowfoot, Open End, 9/16" FCO20A Wrench, Crowfoot, Open End, 5/8" FCO26A Wrench, Crowfoot, Open End, 13/16" FCO30A Wrench, Crowfoot, Open End, 15/16" FCO32A Wrench, Crowfoot, Open End, 1" FC34B Wrench, Crowfoot, Open End with Side Lock, 1 1/16" GA311C Wire Twister/Cutter, Non-reversible, Spring Loaded, .060" cap, 10 1/2" VS32B Wrench, Open End, 4-Way Angle Head, 1" VS28B Wrench, Open End, 4-Way Angle Head, 7/8" VS22B Wrench, Open End, 4-Way Angle Head, 11/16" VS20B Wrench, Open End, 4-Way Angle Head, 5/8" VS18B Wrench, Open End, 4-Way Angle Head, 9/16" VS16B Wrench, Open End, 4-Way Angle Head, 1/2" VS14B Wrench, Open End, 4-Way Angle Head, 7/16" FA4.5E Socket Driver, Hex, Standard, 9/64" FLF80 80 TOOTH FLEX HEAD RATCHET SHD10R HARD GRIP INSTINCT SLOTTED DRV SPBS12O 12IN ORANGE STRIKING PRYBAR Knife, Lock Back, Scallion, Straight Blade, 3 1/2" closed length L872RJ Handle, Knurled, Locking Button, 19 1/4" F5L Sliding T-Handle, 8" GA353B Pick-up Tool, Flexible, Four-Claw, 17 1/2" TMS4E Speeder, 16" long WT105-3216 Wire, Safety, .032" WT105-2016 Wire, Safety, .020" TL72 72 TOOTH LONG HANDLE RATCHET VFI7565 Custom Foam ENV-02296 Lista Royal Blue Cabinet LASERETCH LASER ETCHING Qty 12,024 All items must be Snap-on, ?or equal.? Attention all ?or equal? submittal?s will be required to display technical/descriptive documents. The following FAR provisions also apply to this acquisition: FAR 52.212-1, Instructions to Offerors Commercial Items; The RFQ should be submitted and shall contain the following information: RFQ number, time specified for receipt of offers, name, address, telephone number of offeror, terms of the expressed warranty, price, any discount terms and acknowledgement of all solicitation amendments (if applicable). Quote shall also contain all other documentation specified herein. Offerors shall include a statement specifying the extent of agreement with all terms, conditions and provisions included in the solicitation. Period of Acceptance for Offerors: The offeror agrees to hold the prices in its offer firm for 90 calendar days from the date specified for receipt of offers, unless another time period is stated in an addendum to the solicitation. Late offers: Request for Quotations or modification of quotes received at the address specified for the receipt of offers after the exact time specified for receipt of offers will not be considered. Evaluation/Award: IAW FAR 52.212-2, Evaluation-Commercial Items, the Government will award a (BPA) blanket purchase agreement resulting from this solicitation once an evaluation has been accomplished. Go to the attached hyperlink, (http://www.farsite.hill.af.mil), to down load the FAR Clause 52.212-3 due to its length (12 pages). If you complete the forms as necessary and submit them along with your pricing information. The following clauses are hereby incorporated by reference: FAR 52.212-5, Contract Terms and Conditions Required to Implement Statutes or Executive Orders- Commercial Items, FAR 52.222-3 Convict Labor (E.O. 11755), FAR 52.222-26 Equal Opportunity (E.O. 11246), FAR 52.222-35, Affirmative Action for Special Disabled and Vietnam Era Veterans (38 U.S.C. 4212), FAR 52.222-36 Affirmative Action for Handicapped Workers (29 U.S.C. 793), FAR 52.222-37, Employment Reports on Special Disable Veterans and Veterans of the Vietnam Era (38 U.S.C. 4212), 52.219-4 ? Notice of Price Evaluation Preference for HUBZone Small Business Concerns, FAR 52.232-33, Mandatory Information for Electronic Funds Transfer Payments, FAR 52.247-64, Preference for Privately Owned U.S. Flag Commercial Vessels (46 U.S.C. 1241), DFARS 252.212-7001, Contract Terms and Conditions Required to Implement Statutes or Executive Orders Applicable to Defense Acquisitions of Commercial Items, DFARS 252.225-7036, Buy American Act ? Free Trade Agreements ? Balance of Payments Program (JUN 2005) (Alternate I) (JAN 2005) (41 U.S.C. 10a-10d and 19 U.S.C. 3301 note). 5352.201-9101 Ombudsman. There are no funds currently available however, the basis on which the award will be made will be price and delivery date of 1 May 2008. Quotes shall be marked with the Request for Quotation Number, Date and Time. Facsimile and electronic mail Proposals will be accepted. NOTE: ALL OFFERORS MUST BE REGISTERED IN THE CENTRAL CONTRACTOR REGISTRATION (CCR) BEFORE BEING CONSIDERED FOR AWARD. Information concerning CCR requirements may be viewed via the Internet at http://www.ccr.gov or by calling the CCR Registration Center at 1-888-227-2423. Offerors shall include completed copy of the Online Offeror Representations and Certifications Application. Please refer to http://orca.bpn.gov/login.aspx for information regarding the Online Representation and Certification Application process. Quotations may be submitted via fax to 803-895-5339 or by e-mail to john.dix@shaw.af.mil, or mailed to the attention of 2Lt John Dix at 20 CONS/LGCAA, 321 Cullen Street, Shaw AFB, SC 29152. NOTE: THIS NOTICE WAS NOT POSTED TO FEDBIZOPPS ON THE DATE INDICATED IN THE NOTICE ITSELF (31-MAR-2008); HOWEVER, IT DID APPEAR IN THE FEDBIZOPPS FTP FEED ON THIS DATE. PLEASE CONTACT fbo.support@gsa.gov REGARDING THIS ISSUE.
 

Web Link

Link to FedBizOpps document.
(http://www.fbo.gov/spg/USAF/ACC/20CONS/FA4803-08-Q-A156/listing.html)
 

Place of Performance

Address: 55th Fighter Squadron 101 Patrol Road Bldg. 114 Shaw AFB, SC 29152

Zip Code: 29152

Country: UNITED STATES
 

Record

SN01545705-F 20080402/080401073251 (fbodaily.com)
 

Source

FedBizOpps Link to This Notice
(may not be valid after Archive Date)

---

| FSG Index  |  This Issue's Index  |  Today's FBO Daily Index Page |