SOLICITATION NOTICE
84 -- COLL , MAN'S COAT OPLY/WL GABARDINE 13/4 INCH WIDTH DARK BLUE MC SHADE 2312
- Notice Date
- 4/4/2008
- Notice Type
- Presolicitation
- NAICS
- 313312
— Textile and Fabric Finishing (except Broadwoven Fabric) Mills
- ZIP Code
- 00000
- Solicitation Number
- SPM1C108Q0195
- Archive Date
- 4/12/2008
- Small Business Set-Aside
- Total Small Business
- Description
- THIS IS FOR THE PURCHASE OF ITEM DESCRIPTION FOR PR: 0017828614 PGC NSN: 8315-01-280-0153 COLLAR (1-3/4 INCH) FOR COAT, MAN'S: POLYESTER/WOOL GABARDINE, 10.6 OZ., BLUE SHADE 2312.. ADDITIONAL INFORMATION FOR MIL-C-23486:. COLLAR, COAT, MAN'S: POLY/WOOL, GABARDINE, DARK BLUE SHADE 2312, 1-3/4 INCHES PATTERN DATE: 5 JUNE 1989. INTERIM SPECIFICATION CHANGES TO MIL-C-23486:. PAGE 2, SPECIFICATIONS, FEDERAL: DELETE "V-T-276" AND SUBSTITUTE "A-A-52094". PAGE 5, PARA 3.3.7.3, LINE 1, DELETE "V-T-276, TYPE ICA" AND SUBSTITUTE "A-A-52094 TYPE III". PAGE 6, PARA. 3.3.8, UNDER "NOTE", LINE 2, AFTER "IN" INSERT "EITHER"; LINE 3, AFTER "ENVELOPE" INSERT "OR POLY- ETHELENE BAG".. PAGE 6, PARA. 3.3.9, DELETE IN ENTIRETY AND ADD: "THE COMBINATION LABEL SHALL BE MADE OF A SUIT- ABLE COMMERCIAL CARDBOARD WITH STRING ATTACHED AND TIED TO THE COLLAR THROUGH AN EYELET OR PLASTIC BARB. THE LABEL SHALL BE LEGIBLY PRINTED WITH THE FOLLOWING INFORMATION. NOMENCLATURE NSN SIZE WOOL PRODUCTS ACT INFORMATION CONTRACT NO. CONTRACTOR NAME. PAGE 14, OPER 8.B, LINE 6, DELETE "1-1/8" AND SUBSTITUTE "1-3/8 TO 1-1/2".. PAGE 23, DEFECT "EYELETS" I., DELETE ENTIRELY.. PAGE 26, ADD NEW PARAGRAPH "4.5.2.3 INSPECTION LEVELS AND ACCEPTABLE QUALITY LEVELS (AQL'S). THE INSPECTION LEVELS AND AQL'S EXPRESSED IN DEFECTS PER 100 UNITS (DHU) SHALL BE AS FOLLOWS:. FOR PARAGRAPH 4.5.2.2 GENERAL AND DETAILED DEFECTS COMBINED.. AQL INSP LEVEL. MAJOR 0.65 II MAJOR & MINOR A (COMB) 4.0 TOTAL (MAJOR, MINOR A & B. COMBINED) 6.5. FOR DIMENSIONAL EXAMINATION 1.5 L-6. PAGE 27, PARA 4.5.3 ADD AS LAST SENTENCE "THE INSPECTION LEVEL SHALL BE L-4 AND THE AQL SHALL BE 4.0 DHU." (Ref. W2045). DELETE CURRENT "BARCODE LABEL/TAG" REQUIREMENTS AND SUBSTITUTE THE FOLLOWING: LABEL TAG. EACH ITEM SHALL BE INDIVIDUALLY BAR-CODED WITH A PAPER TAG FOR PERSONAL CLOTHING ITEMS. THE PAPER USED FOR THE TAGS SHALL BE STANDARD BLEACHED SULFATE HAVING A BASIS WEIGHT OF 100 POUNDS WITH A SMOOTH FINISH TO ACCEPT THERMAL TRANSFER AND DIRECT PRINTING. THE TAGS SHALL HAVE A HOLE AND SHALL BE ATTACHED TO EACH ITEM BY A FASTENER, CLEARLY LEGIBLE AND READABLE BY SCANNER. THE BAR CODING ELEMENT SHALL BE A 13 DIGIT NATIONAL STOCK NUMBER (NSN). THERE SHALL BE A 12 DIGIT UNIVERSAL PRODUCT CODE (UPC) ASSIGNED FOR ALL NSNS BY THE GOVERNMENT. THE INITIAL "UPC" MUST APPEAR BENEATH THE CODE. THE BAR CODES FOR NSN AND UPC SHALL BE A MEDIUM TO HIGH DENSITY AND SHALL BE LOCATED SO THAT THEY ARE COMPLETELY VISIBLE ON THE ITEM WHEN IT IS FOLDED AND PACKAGED AS SPECIFIED. THE LABEL'S LOCATION SHALL CAUSE NO DAMAGE TO THE ITEM.. PACKAGING SECTION. ADD THE FOLLOWING: NOTE: UNIVERSAL PRODUCT CODE INFORMATION THE GOVERNMENT ASSIGNED UNIVERSAL PRODUCT CODE (UPC) MUST BE PLACED ON ALL SHIPPING CARTONS ON WHICH THE NSN APPEARS.. THE FOLLOWING DEFECTS APPLY FOR BARCODE LABELS/ TAGS:. BAR CODE OMITTED OR NOT MINOR A READABLE BY SCANNER. HUMAN-READABLE INTERPRETATION (HRI) MINOR A OMITTED OR ILLEGIBLE. NOT VISIBLE ON FOLDED, PACKAGED ITEM MINOR A. CAUSES DAMAGE TO THE ITEM MAJOR. APPLICABLE DOCUMENTS: THE FOLLOWING LIST OF DOCUMENTS IS APPLICABLE TO THIS PROCUREMENT: (Ref. 93546). NOTICE: BE ADVISED THAT THIS ITEM REFLECTS REDUCED AQL'S. MATERIAL ACCEPTANCE: (A) ALL SAMPLING ACCEPTANCE NUMBERS ARE REDUCED BY ONE-THIRD WHERE THE ACCEPTANCE NUMBER IS EQUAL TO OR GREATER THAN THREE(3). FOR EXAMPLE, WHERE ANSI/ASQC Z1.4 SAMPLING ACCEPTANCE NUMBER IS THREE(3), THE NEW ACCEPTANCE NUMBER IS TWO(2). FOR A POINT SYSTEM, IF ACCEPTANCE WAS PREVIOUSLY 150, THE NEW ACCEPTANCE NUMBER IS 100; (B) A SAMPLING ACCEPTANCE NUMBER OF TWO(2) IS REDUCED TO ONE(1); (C) A SAMPLING ACCEPTANCE NUMBER OF ONE(1) REMAINS THE SAME. (ref. T1721) ADDITIONAL INFORMATION FOR A-A-52094A: SIZE 16; TWIST Z; TYPE II; 16.0 OUNCES NOMINAL; GLAZED FINISH NO ADDITIONAL INFORMATION ADDITIONAL INFORMATION FOR A-A-50196:. INTERIM SPECIFICATION CHANGES TO A-A-50196A: PAGE 4, PARAGRAPH 4.1 PACKAGING.; PARAGRAPH 4.2 PACKING.; PARAGRAPH 4.3 PALLETIZATION.; PARAGRAPH 4.4 MARKING.; DELETE IN THEIR ENTIRETY AND SUBSTITUTE: 4.1 PRESERVATION, PACKING, AND MARKING. THE PRESERVATION, PACKING, AND MARKING SHALL BE AS SPECIFIED IN THE CONTRACT OR PURCHASE ORDER.". PAGE 4, 5.1: ADD THE FOLLOWING SUBPARAGRAPH: "F. FINISH REQUIRED, SPECIFY SOFT OR WAX (SEE 2.6).".. PAGE 5, PARAGRAPH 5.2 SOURCE OF GOVERNMENT DOCUMENTS. ADD BELOW "ARE AVAILABLE FROM" "DODSSP - CUSTOMER SERVICE". (Ref. T1074). ADDITIONAL INFORMATION FOR NN-P-71:. NO ADDITIONAL INFORMATION FOLLOWS.. (Ref. T0558). ADDITIONAL INFO FOR UU-P-268: UU-P-268 IS CANCELLED. USE A-A-203C DATED 1/3/96 AND A-A-1894A DATED 5/27/93. (ref. T0688 - 9/11/06) MIL-DTL 32075: LABEL FOR CLOTHING, EQUIPAGE, AND TENTAGE, GENERAL USE REPLACES DDD-L-20 (Ref. T0451 - June 19, 2007) ADDITIONAL INFORMATION FOR MIL-C-368:. (USE OF IMPORTED YARN AUTHORIZED FOR CLASS 1 CLOTH) INTERIM CHANGES TO MIL-C-368J:. PAGE 2, PARA. 1.2, ADD THE FOLLOWING: "CLASS 4 - TWILL, 3.7 OUNCE, RELAXED FINISH.".. PAGE 3, PARA. 2.2, ADD THE FOLLOWING: "AATCC 20 - FIBER ANALYSIS: QUALITATIVE". PAGE 4, TABLE I, UNDER "CLASS" COLUMN, DELETE "1" AND SUBSTITUTE "1 AND 4".. PAGE 8, ADD THE FOLLOWING NEW SUBPARAGRAPH: "3.8.1 RELAXED FINISH. CLASS 4 CLOTH SHALL HAVE A RELAXED FINISH APPLIED ON A TENTER FRAME DURING THE FINISHING PROCESS.".. PAGE 8, TABLE II, UNDER TEST METHOD COLUMN, LINE 1, DELETE "1600" AND SUBSTITUTE "AATCC 20".. PAGE 8, TABLE II, ADD THE FOLLOWING: "SHRINKAGE (CLASS 4) 3.8, 3.8.1 5580". (Ref. T0902). ADDITIONAL INFORMATION FOR MIL-F-495:. NOTE OF REINSTATEMENT 1/19/2001. (Ref. T1192). ADDITIONAL INFORMATION FOR MIL-DTL-10176:. INTERIM SPECIFICATION CHANGES TO MIL-DTL-10176K: WHEN AIR FORCE SHADE 1605 IS SPECIFIED, THE CLOTH SHALL BE PIECE DYED.. PAGE 7 3.7.3, LINE 2: DELETE "5.5" AND SUBSTITUTE "5.0" ADD THE FOLLOWING PARAGRAPHS: "3.7.4 WATER REPELLENT TREATMENT. WHEN SPECIFIED, THE CLOTH SHALL BE GIVEN AN APPROVED DURABLE FLUOROCHEMICAL TYPE WATER REPELLENT TREATMENT AND SHALL CONFORM TO THE REQUIREMENTS SPECIFIED IN 3.7.2 WHEN TESTED AS SPECIFIED IN 4.4.4. 3.7.4.1 SPRAY RATING. THE RESULTS OF THE THREE INDIVIDUAL DETERMINATIONS ON THE SAMPLE UNIT FOR SPRAY RATING SHALL BE EQUAL TO OR BETTER THAN RATINGS OF 90,90,80 INITIALLY AND 80,80,70 AFTER ONE DRYCLEANING WHEN TESTED AS SPECIFIED IN 4.4.4." PAGE 9, PARAGRAPH 4.3.3.1 YARD-BY-YARD EXAMINATION, LINE 3, DELETE "10" AND SUBSTITUTE "7", LINE 4, DELETE "12" AND SUBSTITUTE "8" PAGE 10 TABLE II, BELOW "PH": ADD THE FOLLOWING UNDER THEIR RESPECTIVE COLUMNS: "WATER REPELLENCY: SPRAY RATING: INITIAL--------3.7.3.1---------5526 AFTER 1 DRYCLEANING----3.7.3.1---5508 AND 5526. SPONGING: COLD WATER SPONGING IS REQUIRED. A PROPER ALCOHOL WETTING AGENT SHALL BE USED TO INSURE SHRINKAGE IS ACCOMPLISHED AND WATER RESISTANT FINISH IS NOT RELEASED. THE WATER REPELLANT TREATMENT MUST BE APPLIED BEFORE THE SPONGING OPERATION.. ALL THE SPECIFICATION REQUIREMENTS MUST BE MET.. CODE OF FEDERAL REGULATIONS. 16 CFR PART 1500- FEDERAL HAZARDOUS SUBSTANCES ACT REGULATIONS. 29 CFR PART 1910- OCCUPATIONAL SAFETY AND HEALTH STANDARDS. (APPLICATIONS FOR COPIES OF REFERENCED DOCUMENTS SHOULD BE ADDRESSED TO U.S GOVERNMENT PRINTING OFFICE, SUPERINTENT OF DOCUMENTS, MAIL STOP: SSOP, WASHINGTON, DC 20402-9328.). PRINCIPLES AND METHODS OF TOXICOLOGY, A. WALLACE HAYES (EDITOR), 1989, PP 394-396.. (APPLICATIONS FOR COPIES OF REFERENCED DOCUMENTS SHOULD BE ADDRESSED TO RAVEN PRESS,1185 AVENUE OF THE AMERICAS, NEW YORK, NY 10036.). TOXICITY. THE FINISHED CLOTH SHALL NOT PRESENT A DERMAL HEALTH HAZARD WHEN USED AS INTENDED.. TOXICITY ASSESSMENT. THE CONTRACTOR MUST FURNISH INFORMATION WHICH CERTIFIES THAT THE FINISHED PRODUCT IS COMPOSED OF MATERIALS WHICH HAVE BEEN SAFELY USED COMMERCIALLY OR PROVIDE SUFFICIENT TOXICITY DATA TO SHOW COMPATIBILITY WITH PROLONGED, DIRECT SKIN CONTACT. AT A MINIMUM, TOXICITY DATA SHOULD INCLUDE RESULTS FROM A PRIMARY DERMAL IRRITATION STUDY IN LABORATORY ANIMALS AND A REPEATED INSULT HUMAN PATCH TEST (MODIFIED DRAIZE PROCEDURE). THE LATTER MUST BE CONDUCTED UNDER THE SUPERVISION OF A QUALIFIED DERMATOLOGIST USING AT LEAST 100 FREE LIVING INDIVIDUALS.. INTERIM CHANGES TO TYPE II, CLASS 12 CLOTH, NAVY SHADE 3346 ONLY. APPLICABLE WHEN PROCURING CLOTH FOR THE FOLLOWING ITEMS: COAT, MANS, BLUE, DRESS, MIL-C-29107 COAT, WOMAN'S, BLUE, DRESS, MIL-C- 29628 SKIRT, WOMAN'S, BLUE, DRESS, MIL-S-29631 SLACKS, WOMAN'S, MIL-S-29630 TROUSERS, MANS, CLASS 12 MIL-T-41828 (REF. T0969). ADDITIONAL INFORMATION FOR MIL-C-29405:. WITH INTERIM CHANGES TO MIL-C-29405: NOTE - REDUCED AQLS APPLY AS FOLLOWS: PAGE 6, PARA 4.4.3, LINE 5, DELETE "10" AND SUBSTITUTE "7".. (Ref. T0993) ADDITIONAL INFORMATION FOR MIL-P-15011:. NO ADDITIONAL INFORMATION FOLLOWS. (Ref. T1368). ADDITIONAL INFORMATION FOR MIL-B-17757: MIL-B-17757 IS CANCELLED WITHOUT REPLACEMENT. ASTM-D-5118 IS AUTHORIZED FOR USE IN LIEU OF MIL-B-17757 (ref. T0857 - 6/15/06) ADDITIONAL INFORMATION FOR MIL-C-43718:. MIL-C-43718C HAS BEEN CANCELLED A-A-52106 HAS BEEN AUTHORIZED AS A REPLACEMENT. INTERIM SPECIFICATION CHANGES TO MIL-C-43718C:. PAGE 3, PARA. 2.2, ADD THE FOLLOWING: "AATCC 20 - FIBER ANALYSIS: QUALITATIVE". PAGE 5, PARA. 3.9,DELETE ENTIRELY AND SUBSTITUTE "3.9 SEAM EFFICIENCY. ALL STAPLE FIBER BASED CLOTH SHALL HAVE A SEAM EFFICIENCY OF NOT LESS THAN 80 PERCENT; WHEREAS, 100 PERCENT TEXTURIZED FILAMENT POLYESTER SHALL HAVE A SEAM EFFICIENCY OF NOT LESS THAN 70 PERCENT WHEN TESTED AS SPECIFIED IN 4.4.3.". PAGE 8, TABLE II, UNDER TEST METHOD COLUMN, LINE 1, DELETE "1600" AND SUBSTITUTE "AATCC 20". (Ref. T1124). ADDITIONAL INFORMATION FOR A-A-52106:. INTERIM CHANGES TO A-A-52106:. PAGE 1, UNDER ABSTRACT. AFTER "THE CLASS 3 CLOTH IS INTENDED FOR USE AS LINING MATERIAL IN DRESS COATS." ADD "CLASS 4 CLOTH IS INTENDED TO BE USED AS A GARMENT LINING. CLASS 5 CLOTH IS INTENDED FOR USE AS A NECKTIE AND NECKTAB OUTERSHELL FABRIC." PAGE 1, CLASSIFICATION. ADD CLASS 4 - LIGHT WEIGHT 2.4 OZ; 2/1 RIGHT HAND TWILL USING 100% FILAMENT POLYESTER SINGLE PLY YARNS FOR BOTH CLASS 4 AND CLASS 5. CLASS 5 - MEDIUM WEIGHT 3.0 OZ; 5/1 HERRINGBONE TWILL PAGE 1, PARAGRAPH 1.1 CLASSIFICATION: ADD PAGE 1, GENERAL DESCRIPTION. LINE 5 AFTER "YARNS" ADD "THE CLASS 4 CLOTH SHALL BE A TWO UP-ONE DOWN RIGHT HAND TWILL. THE CLASS 5 CLOTH SHALL BE A FIVE UP-ONE DOWN HERRINGBONE TWILL. THE YARNS FOR CLASS 4 CLOTH SHALL BE SINGLE PLY WITH A NOMINAL DENIER OF 70 FOR THE WARP YARNS AND 150 FOR THE FILLING YARNS. PAGE 2, TABLE I CLOTH REQUIREMENTS AFTER CLASS 3" ADD INFORMATION FOR "CLASSES 4 AND 5" CHARACTERISTIC CLASS 4 CLASS 5 MATERIAL CONTENT, PERCENT: POLYESTER 100% 100% COTTON 0 0 RAYON 0 0 COLORFASTNESS TO: PERSPIRATION GOOD GOOD SUBLIMATION GOOD GOOD WET DRY-CLEANING GOOD GOOD CROCKING (MIN.) 3.5 3/ 3.5 3/ (BLACK OR DARK BLUE COLORS) 1.0 3/ 1.0 3/ LABILE SULFUR CONTENT 4/ 4/ WEIGHT, OZ. /SQ. YD. (MIN.) 2.4 3.0 YARNS PER INCH (MIN.) WARP 124 140 FILLING 76 75 BREAKING STRENGTH POUNDS (MIN.) WARP 140 160 FILLING 110 130 TEARING STRENGTH POUNDS (MIN.) WARP 5.0 14.0 FILLING 3.0 10.5 PAGE 2, PARAGRAPH 2.1 GENERAL DESCRIPTION: AFTER "THE CLASS 5 CLOTH SHALL BE A FIVE UP-ONE DOWN "THE CLASS 5 CLOTH, USING 100 % FILAMENT HERRINGBONE TWILL." INSERT "THE CLASS 6 CLOTH POLYESTER SINGLE PLY WITH BLACK 70 DENIER NOMINAL WARP AND AIR FORCE BLUE 1622 150 DENIER NOMINAL FILLING YARNS." USING 100% FILAMENT POLYESTER SINGLE PLY WITH 70 DENIER NOMINAL IN THE WARP AND 150 DENIER HERRINGBONE TWILL." INSERT "THE CLASS 6 CLOTH POLYESTER SINGLE PLY WITH BLACK 70 DENIER NOMINAL WARP AND AIR FORCE BLUE 1622 150 DENIER NOMINAL FILLING YARNS." USING 100% FILAMENT POLYESTER SINGLE PLY WITH 70 DENIER NOMINAL IN THE WARP AND 150 DENIER NOMINAL IN THE FILLING DIRECTION." PAGE 2, PARAGRAPH 2.2 PHYSICAL REQUIREMENTS: TABLE I. CLOTH REQUIREMENTS, ADD THE FOLLOWING PAGE 3, AFTER 2.3 LENGTH AND PUT-UP. ADD THE FOLLOWING NEW PARAGRAPH. "2.4 COLOR. THE COLOR OF THE FINISHED CLOTH SHALL BE AS SPECIFIED (SEE 5.1) AND SHALL MATCH THE STANDARD SAMPLE FOR SHADE. CLASS 5 FABRIC IS MADE FROM DYED WARP AND DYED FILLING IN TWO DIFFERENT COLORS. CLASS 5 FABRIC SHALL BE AIR FORCE SHADE BLUE 1622 ROLL # 89-2. (Ref. T1514). ADDITIONAL INFORMATION FOR MIL-I-45208: NOTE: MIL-I-45208 HAS BEEN CANCELLED AND REPLACED BY THE FOLLOWING: INTERNATIONAL STANDARDS ISO 9001:2000 OR AMERICAN SOCIETY FOR QUALITY ASQ 2003 VERSION. HIGHER LEVEL INSPECTION SYSTEM: THE INSPECTION SYSTEM(S) MUST BE SUBMITTED WITH YOUR BID PROPOSAL FOR EVALUATION AND APPROVAL BY DSCP'S CONTRACTING OFFICER. INSPECTION SYSTEM(S) COMPLIANT/BUT ARE NOT LIMITED TO THE INTERNATIONAL STANDARDS ISO 9002 OR ASQ 2003 MAY BE UTILIZED IF TAILORED TO THE SPECIFIC QUALITY ASSURANCE REQUIREMENTS IN THIS SOLICITATION. (Ref. T1286 - 9/11/06) ADDITIONAL INFORMATION FOR FED-STD-191: FED-STD-191A NOTICE 7, DATED AUGUST 9, 2000 IS HEREBY INACTIVE FOR NEW DESIGN. WHEN NOT USING FED-STD-191, SEE INTERIM CHANGES TO END ITEM SPECIFICATION FOR REPLACEMENT ASTM. INTERIM CHANGES TO FED-STD-191A: TEST METHOD 5202, PARA. 5.3, DELETE FIRST SENTENCE AND SUBSTITUTE: "THE SPECIMEN SHALL BE CLAMPED FIRMLY, WITH ONE END FLUSH WITH THE OUTER EDGE OF THE VISE, SUCH THAT ONE INCH OF SPECIMEN LIES WITHIN THE CLAMP AND ONE INCH OF THE SPECIMEN EXTENDS BEYOND THE CENTER OF ROTATION (FACE OF THE VISE), AND WITH THE LONG EDGE PARALLEL TO THE FACE OF THE DIAL PLATE". TEST METHOD 5309.1 ABRASION RESISTANT OF TEXTILE WEBBING. PAGE 1, PARA 4.1.2,LINE 4: DELETE "B-97" AND SUBSTITUTE "B-91". THE FOLLOWING METHODS ARE IDENTIFIED AS SPECIFYING OZONE DEPLETING SUBSTANCES: 1100, 1200, 1240, 1400, 1410, 1500, 1510,1520,1530, 1540, AND 1550. PARA 5.1 OF THESE TEST METHODS REQUIRE THE USE OF 1,1,1- TRICHLOROETHANE, ALCOHOL OR ETHER. 1,1,1-TRICHLORETHANE IS AN OZONE DEPLETING SUBSTANCE (METHYL CHLOROFORM) AND IS THEREFORE PROHIBITED. THE USE OF EITHER ALCOHOL OR ETHER IS REQUIRED WHEN THESE METHODS ARE IN BASIC OR ANY REFERENCED DOCUMENT. METHOD 5202, STIFFNESS OF CLOTH, DIRECTIONAL; CANTILEVER BENDING METHOD. PAGE 2, PARA. 5.3 DELETE FIRST SENTENCE AND SUBSTITUTE WITH THE FOLLOWING: "THE SPECIMEN SHALL BE CLAMPED FIRMLY, WITH 1 END FLUSH WITH THE OUTER EDGE OF THE VISE, SUCH THAT 1" OF THE SPECIMEN LIES WITHIN THE CLAMP AND 1" OF THE SPECIMEN EXTENDS BEYOND THE CENTER OF ROTATION (INNER FACE OF THE VISE) AND WITH THE LONG EDGE PARALLEL TO THE FACE OF THE DIAL PLATE." METHOD 5556.1, MOBILE LAUNDRY EVALUATION FOR TEXTILE MATERIALS, PAGE 5, PARA. 5.2.2, LINE 8: DELETE SENTENCE BEGINNING WITH "THE SPECIMENS AND BALLAST" IN ITS ENTIRETY AND SUBSTITUTE WITH THE FOLLOWING: "THE SPECIMENS AND BALLAST SHALL BE SEPARATED, OPENED TO FULL WIDTH AND PLACED IN A PRE-HEATED DRYER HAVING A STACK TEMPERATURE OF 140-180 DEG. F. THIS TEMPERATURE RANGE CORRESPONDS TO A SETTING OF "HIGH" ON THE TEMPERATURE INDICATOR ON THE DRYER. DRYING SHALL CONTINUE FOR 45-60 MINUTES OR UNTILSAMPLES ARE DRY IN A ROTATING TUMBLE DRYER." PAGE 5, PARA. 5.2.3, LINE 8: DELETE SENTENCE BEGINNING WITH "THE SPECIMENS AND BALLAST" IN ITS ENTIRETY AND SUBSTITUTE WITH THEFOLLOWING: "THE SPECIMENS AND BALLAST SHALL BE SEPARATED, OPENED TO FULL WIDTH AND PLACED IN A PRE-HEATED DRYER HAVING A STACKTEMPERATURE OF 140-180 DEG. F. THIS TEMPERATURE RANGE CORRESPONDS TO A SETTING OF "HIGH" ON THE TEMPERATURE INDICATOR ON THE DRYER. DRYING SHALL CONTINUE FOR 35-40 MINUTES OR UNTIL SAMPLES ARE DRY." METHOD 5931, ELECTROSTATIC DECAY OF FABRICS; DETERMINATION OF PAGE 1, PARA. 3: AFTER NUMBER OF DETERMINATIONS ADD "PER SAMPLEUNIT". PAGE 1, PARA. 4: DELETE "APPARATUS" AND SUBSTITUTE "APPARATUS". PAGE 1, PARA. 5.1, LINE 3: AFTER "AT" DELETE"APPROXIMATELY". PAGE 2, PARA. 5.2, LINES 2, AND 5: AFTER "OF" ADD "+-". LINE 6: AFTER "TO" ADD "+-". PAGE 2, PARA. 5.3: DELETE IN ITS ENTIRETY AND SUBSTITUTE WITH THE FOLLOWING:"5.3 MOUNT A SPECIMEN TIGHTLY ACROSS THE ELECTRODES, CENTERING IT OVER THE SENSOR OPENING. THE SURFACE OF THE TEST SPECIMEN (BACK OR FRONT) SHALL FACE THE SENSOR. RECORD (OPTIONAL) THE RESIDUAL CHARGE LEVEL ON THE SAMPLE AS SEEN BY THE SENSOR, INCLUDING POLARITY. NOTE THAT TEST SAMPLES WITH THE RESIDUAL CHARGE LEVELS OF LESS +500 VOLTS YIELD THE BEST RESULTS. APPLY +5000 VOLTS TO THEELECTRODES FOR A PERIOD OF 20 SECS. AT THE END OF THE 20 SECOND PERIOD, THE HIGH VOLTAGE (5000 VOLTS) SHALL BE TURNED OFF ANDTHE SPECIMENS IMMEDIATELY GROUNDED. THE VOLTAGE BEHAVIOR OF THE SPECIMEN WITH RESPECT TO TIME SHALL BE PLOTTED ON THE RECORDER. NOTE: IN SOME CASES, THE TEST EQUIPMENT WILL DISPLAY VOLTAGE AND DECAY TIME INFORMATION AND A CHART RECORDER IS NOT NECESSARY." PAGE 2, PARA. 5.4, LINE 3: DELETE SENTENCE BEGINNING WITH "IF THE SPECIMEN DID" IN ITS ENTIRETY. PAGE 2, PARA. 5.5: DELETE PARAGRAPH IN ITS ENTIRETY AND SUBSTITUTE WITH THE FOLLOWING: "RECORD THE MAXIMUM VOLTAGE LEVEL(INCLUDING POLARITY) AND DECAY TIME TO 10% OF THE MAXIMUM VOLTAGE LEVEL ACHIEVED." PAGE 2, PARA. 5.6, LINE 1: ADD THE FOLLOWING PRIOR TO 1ST SENTENCE: "REVERSE VOLTAGE POLARITY REPEAT MEASUREMENT, ANDRECORD RESULTS." PAGE 3, PARA. 6.6: DELETE PARAGRAPH IN ITS ENTIRETY AND SUBSTITUTE WITH THE FOLLOWING: "THE AVERAGE TIME TO DECAY TO 10%OF THE MAX VOLTAGE SHALL BE INCLUDED FOR EACH OF THE WARP & FILLING DIRECTIONS, AS WELL AS THE OVERALL AVERAGE, FOR EACHFABRIC TESTED. THESE WILL BE OBTAINED BY AVERAGING THE TEST RESULTS (ABSOLUTE VALUE OF) TOGETHER FOR BOTH VOLTAGEPOLARITIES. UNLESS OTHERWISE STATED IN THE REQUIREMENTS DOCUMENT, THE FABRIC SHALL BE CONSIDERED ACCEPTABLE IF THEAVERAGE MAXIMUM VOLTAGE IN BOTH THE WARP AND FILLING DIRECTIONS IS LESS THAN 4000 VOLTS, AND THE AVERAGE DECAY TIME (TO 10% MAXVOLTAGE) IS GREATER THAN 0.5 SECONDS IN BOTH THE WARP AND FILLING DIRECTIONS. IT SHALL BE INDICATED WHETHER THE FABRIC ISACCEPTABLE OR NON-ACCEPTABLE." PAGE 3, PARA. 7.1, SECOND COLUMN, LINE 2: DELETE 406C AND SUBSTITUTE WITH "406D". AFTER PARA. 7.1, ADD THE FOLLOWING: "7.2 NOTE: IF THE MODEL 406D STATIC DECAY METER, OR EQUIVALENT, IS USED, A CHART RECORDER ISNOT MANDATORY FOR THE TEST." (Ref. T0215 - 05/17/07) ADDITIONAL INFORMATION: FED-STD-751 HAS BEEN CANCELLED AND REPLACED BY ASTM-D-6193, 4/98 STANDARD PRACTICES FOR STITCHES AND SEAMS. THIS STANDARD SHOULD BE USED IN PREFERENCE TO FED-STD-751. (ref. T0216 - May 18, 2006) ADDITIONAL INFORMATION FOR MIL-STD-105: NOTE: MIL-STD-105 HAS BEEN CANCELLED AND REPLACED BY THE FOLLOWING: "AMERICAN NATIONAL STANDARDS INSTITUTE (ANSI) ANSI/ASQC Z1.4 - SAMPLING PROCEDURES AND TABLES FOR INSPECTION BY ATTRIBUTES". APPLICATION FOR COPIES SHOULD BE OBTAINED FROM: AMERICAN SOCIETY FOR QUALITY 600 NORTH PLANKINTON AVENUE MILWAUKEE, WI 53203 (Ref. T0301) MIL-STD-129P, WITH CHANGE 4 - DEPARTMENT OF DEFENSE STANDARD PRACTICE MILITARY MARKING FOR SHIPMENT AND STORAGE - DATED 19 SEPTEMBER 2007 INTERIM CHANGES: OMISSION OF MARKINGS ON EXTERIOR SHIPPING CONTAINERS OF ITEMS IN THE DEFENSE SUPPLY CENTER (DSCP) CLOTHING AND TEXTILE (C&T) DIRECTORATE: THE NOMENCLATURE AND MANUFACTURER'S NAME (WHEN THE NAME IDENTIFIES THE MATERIAL) SHALL BE OMITTED FROM ALL EXTERIOR SHIPPING CONTAINERS OF DSCP C&T ITEMS, REGARDLESS OF MODE OF SHIPMENT. IF THE MANUFACTURER'S NAME DOES NOT IDENTIFY THE MATERIAL AS BEING CLOTHING, IT MAY REMAIN. NSNS SHALL BE SHOWN ON ALL SHIPPING CONTAINERS OF C&T ITEMS, THE PACKING LIST SHALL BE PLACED INSIDE THE LAST CONTAINER TO BE LOADED FOR EACH SHIPMENT. THE WORDS "PACKING LIST HERE" SHALL BE STENCILED, NOT HAND LETTERED, ON THE CONTAINER. (Ref. T0303 - May, 2006) ADDITIONAL INFORMATION: MIL-STD-147D IS HEREBY CANCELLED AND REPLACED BY MIL-HDBK-774, "PALLETIZED UNIT LOADS", DATED 30 AUGUST 2004 (See T0035 for MIL-HDBK-774A) (Ref. T0306 - 03/28/2007, paa2775) I/A/W A-A-52094 REFNO AMEND NR TYPE NUMBER I/A/W A-A-52106 REFNO AMEND NR TYPE NUMBER I/A/W STD NR FED-STD-191A(6) NOT 7 REFNO AMEND NR A TYPE NUMBER I/A/W STD NR FED-STD-751A(1)(1) NOT 2 REFNO AMEND NR 1 TYPE NUMBER I/A/W SPEC NR MIL-B-17757E(2) NOT 2 REFNO AMEND NR 2 TYPE NUMBER I/A/W SPEC NR MIL-C-368J REFNO AMEND NR J TYPE NUMBER I/A/W SPEC NR MIL-C-43718C NOT 2 REFNO AMEND NR C TYPE NUMBER I/A/W SPEC NR MIL-DTL-10176K REFNO AMEND NR K TYPE NUMBER I/A/W SPEC NR MIL-DTL-32075 REFNO AMEND NR TYPE NUMBER I/A/W SPEC NR MIL-I-45208A(2) NOT 2 REFNO AMEND NR 2 TYPE NUMBER I/A/W SPEC NR MIL-P-15011J REFNO AMEND NR J TYPE NUMBER I/A/W STD NR MIL-STD-105E NOT 2 REFNO AMEND NR E TYPE NUMBER I/A/W STD NR MIL-STD-129P(3) REFNO AMEND NR P TYPE NUMBER I/A/W STD NR MIL-STD-147D NOT 2 REFNO AMEND NR D TYPE NUMBER I/A/W SPEC NR NN-P-71C NOT 1 REFNO AMEND NR C TYPE NUMBER I/A/W SPEC NR UU-P-268G(3) NOT 1 REFNO AMEND NR 3 TYPE NUMBER FOR A COPY OF THE SOLICITATION EMAIL mel.graves@dla.mil.
- Web Link
-
FedBizOpps Complete View
(https://www.fbo.gov/?s=opportunity&mode=form&id=c0ef3f9e2316ebd818b533deb11fc662&tab=core&_cview=1)
- Record
- SN01547524-W 20080406/080404220505-c0ef3f9e2316ebd818b533deb11fc662 (fbodaily.com)
- Source
-
FedBizOpps Link to This Notice
(may not be valid after Archive Date)
| FSG Index | This Issue's Index | Today's FBO Daily Index Page |