SOURCES SOUGHT
65 -- Monitoring Catheters & Supplies
- Notice Date
- 4/8/2008
- Notice Type
- Sources Sought
- NAICS
- 339113
— Surgical Appliance and Supplies Manufacturing
- Contracting Office
- Bldg 1, 38400 Bob Wilson Drive, San Diego, California, 92134-5000
- ZIP Code
- 92134-5000
- Solicitation Number
- APP9-10-0712-003
- Archive Date
- 5/1/2008
- Point of Contact
- CindyIngrao,, Phone: 619-532-8517
- E-Mail Address
-
cynthia.ingrao@med.navy.mil
- Description
- A.General Information This is a reposting of this announcement. Vendors that have responded to the previous posting dated February 28, 2008 don’t have to resubmit their original response unless there is an update or change to it. The Southwest Region is standardizing for a possible multi-vendor award for Monitoring Catheters & Supplies. This supersedes Solicitation Number: Reference Number – N002597207SS02, Monitoring and Central Venous Catheters, Kits and Supplies. The region recognizes this is a specialized category in which vendors may manufacture and/or distribute subsets of the category. A multiple selection is only a possibility if no single vendor can meet the total requirement of the Region and would be based on a combination of MTF preference and product availability. In order to meet the total requirements of the Region a vendor must be able to offer a comprehensive product line (all items within a product category) available in the necessary quantities to meet all of the DoD MTFs’ needs. That is, the required products must be available in the required quantities. As stated previously, it is not the preference of this standardization to make a multiple selection, however, if necessary due to non-availability from a single source, a multiple selection would be made based on a combination of Regional Clinical preference as determined by the Clinical Product Team (CPT) and vendor product availability. The product category includes catheters for use in cardiology, vascular and interventional medicine placed centrally or peripherally for short, intermediate, or long term care that provide rapid and effective method for monitoring cardiac pressures, sampling mixed venous blood, and infusing solutions. The primary objective of this standardization initiative is to achieve a best value determination that represents the clinically preferred product or source at the best possible price. It is also intended that standardized product be obtained through the DoD Prime Vendor Program. The secondary objective of this standardization initiative is the potential of decreasing the existing Stock Keeping Unit’s (SKUs) and thus dollars held as inventory. The below item detail of the products being purchased within the region will be used to target and cross-match product lists submitted by the vendor. This process will ensure the minimum requirements of the Region are met and help identify possible candidates (i.e. like product items) for elimination, as well as potentially minimizing the number of SKUs included in a subsequent incentive agreement. The major facilities in the area include but are not limited to Naval Medical Center San Diego; David Grant Medical Center, Travis AFB; Naval Hospital Camp Pendleton; Robert E. Bush Hospital, Twenty-Nine Palms; Weed Army Community Hospital, Ft. Irwin; Naval Hospital Lemoore. This standardization action is part of the Medical/Surgical Prime Vendor program executed by the Defense Supply Center Philadelphia, Directorate of Medical Materiel. In order to participate, your company must have a Distribution and Pricing Agreement (DAPA) and a separate commercial agreement with the Prime Vendor of the program. This is pursuant to the DAPA clause by which DAPA holders agree to the Standardization process and to allow Prime Vendors to distribute their items. This is a supplement to the Prime Vendor Program and it is not a contract. For additional information regarding DSCP’s Prime vendor program please access our web site at: https://dmmonline.dscp.dla.mil The Tri-Service Regional Business Office (TRBO) will provide anticipated volume (quantity) based on historical usage/forecasted requirements. The agreement will be for a base period of two (2) years (24 months) from date of award with three (3) 12-month option periods. Anticipated award date is May 2008. The evaluation will be based on technical, clinical and pricing factors. The Technical/Company and Clinical/Performance evaluation factors, when combined, are considered significantly more important than cost or price. As the technical and clinical evaluation results become more equal, price will become more important. The selection will be determined utilizing best value/trade off criteria. The selection of a single vendor is anticipated. However, if no single vendor can meet the total requirement of the Region, the Government reserves the right to make two or more selections for RIAs. In this event, selection would be based on a combination of MTF preference and product availability. Point of Contact: Cindy Ingrao, RN, MSN at (619) 532-8517; Email- cynthia.ingrao@med.navy.mil B.Products & Performance Required The Southwest Region is seeking product line items in the category of Monitoring Catheters & Supplies. The product category includes catheters for use in cardiology, vascular and interventional medicine placed centrally or peripherally for short, intermediate, or long term care that provide rapid and effective method for monitoring cardiac pressures, sampling mixed venous blood, and infusing solutions. Within this region, this product line has an estimated annual dollar requirement of $178,000. This forecast is based on historical prime vendor sales during a recent 12-month period. The top high volume usage lines for this project include: Kit Blood Sampling Flush Squeeze 60INL Line Blood Port X 2 - $67K; Catheter Set Radial Artery 20Ga - $25K; Catheter Swan Ganz Continuous Cardiac Output - $19K; Thermodilution Catheter 5L,8F,110CM with Heparin - $13K; Truwave VAMP Combo 160 Kit - $12K; Truwave DPT 60" Single Line - $7K; Monitoring Set Arterial Pressure Sterile - $6K; Catheter Kit Arterial PTFE 20G Female - $5K; Kit Transducer Pressure Single Line Neonatal/Pediatric - $5K; & VAMP Direct Draw - $3K. At the request of the Southwest Region Military Treatment Facilities vendors will provide on-site support and in-servicing, educational resources and tools for clinical use of the product, conversion information, prime vendor order numbers, MSDS information, and itemization of the brands, types and packaging information of the products offered by the vendor. C.Instructions to Vendors If you are interested in participating in this standardization initiative, email your (1) Company name and address, (2) POC (Name and Phone Number, Fax Number, E-mail address, your answers to the technical questions/criteria below and product literature to cynthia.ingrao@med.navy.mil no later than March 20, 2008. All e-mail communications between vendors and the region will be digitally signed. Submissions must be received by 4:00 PM EST on the specified closing date/time of this sources sought notice. Vendors that fail to meet the submittal deadline will be disqualified. If your product literature is more than 4MB in size, please mail your product literature to: Cindy Ingrao, RN, MSN Tri-Service Regional Business Office MSMMO - Southwest Region 34800 Bob Wilson Drive, Suite 110 San Diego, CA 92134 Phone: (619) 532-8517 This process will include vendor requirements of electronic responses to technical criteria, no charge samples for clinical evaluation, and submission of electronic best price offers. Due to the potential for email to become lost in transmission due to network security, etc., the vendor is strongly encouraged to confirm with the Region that its quote and literature actually arrived at the Region via email. We strongly recommend that each submitting vendor confirm receipt, allowing enough time for re-submission before the due date, if a problem should occur with the first transmission. D. Evaluation Criteria The Tri-Service Product Review Board (TPRB) is the governing board of the standardization process. This board includes clinicians and logisticians from all of the Military Treatment Facilities (MTFs) within the Southwest Region. They are the decision makers for this initiative. Phase I - Technical/Company Evaluation Process. Vendors will be required to provide responses to the technical/company criteria. Amplifying information about your products may be requested by the Government. The responses will be reviewed under the purview of the TPRB to determine acceptability. All technical/company criteria are weighted equally. After review of the technical/company criteria, those vendors who meet these criteria will be invited to participate in the clinical/performance evaluation. The TPRB will review the responses from the vendors and determine which vendors meet the criteria and determine acceptability. Acceptability for purposes of evaluation of technical/company criteria: Generally, responses to all questions in this section demonstrate: (1) the vendor is a distributor or manufacturer of a complete line of the subject medical/surgical consumables; (2) based on the vendor’s responses, the evaluators have reasonable confidence that the line or products and/or services submitted meet the medical standards of care of the community, applicable to such products or services; (3) the vendor has, or is obtaining a DAPA for the items (vendors that fail to have a DAPA will be disqualified); (4) the vendor has, or is obtaining, an agreement covering the items, with Cardinal, the Prime Vendor for the region (vendors whose products are not available through the regional PV will be disqualified); (5) the vendor intends to provide discounts off DAPA for all products included in this standardization initiative (vendors that fail to provide a discount from DAPA will be disqualified); and (6) the vendor’s information provided is factually correct. Any misrepresentation of information will disqualify the vendor from further consideration. Technical/Company Criteria 1.Vendors must offer catheters that provide rapid and effective method for monitoring cardiac pressures, sampling mixed venous blood, and infusing solutions like Kit Blood Sampling Flush Squeeze 60INL Line Blood Port X 2; Catheter Set Radial Artery 20Ga; Catheter Swan Ganz Continuous Cardiac Output; Thermodilution Catheter 5L,8F,110CM with Heparin; Truwave VAMP Combo 160 Kit; Truwave DPT 60" Single Line; Monitoring Set Arterial Pressure Sterile; Catheter Kit Arterial PTFE 20G Female; Kit Transducer Pressure Single Line Neonatal/Pediatric; & VAMP Direct Draw. Vendors must provide a list of the products they supply in this product line and the brand name to include the type, size and configuration. 2.Vendors must have a separate agreement with the Prime Vendor supporting our Region, Cardinal Health or will be disqualified. 3.Vendors must have a DAPA number or is in the process of obtaining a DAPA or will be disqualified. 4.Your product line must be latex free and this must be indicated on the packaging of the product. 5.Vendors must provide product literature for this product line. 6.Vendors must provide 24/7 customer support and identify company resources for such support with their initial submittals. 7.Vendors must submit prices lower than their DAPA or will be disqualified. Where lower FSS prices are available, DAPA holders are required by previous agreement to provide the FSS price as their DAPA price. Therefore, national FSS prices do not represent a discount off the DAPA. 8.Your products must meet the FDA requirements for medical devices. 9.Vendors must provide electronic and hard copy proposed pricing and a competitive product cross-reference in electronic excel format upon request. 10.Vendors must provide any history of back orders and/or recalls/alerts that occurred during the most recent 24-month period for monitoring catheters and supplies including dates, duration, cause, and resolution with their initial submittals. This represents your sole opportunity to present this information. Provide any mitigating factors that you may have in order to provide a proper context for the cited back orders, recalls, etc. Phase II - Clinical/Performance Evaluation Process. The TPRB will request samples from the product group to be clinically evaluated at selected Military Treatment Facilities. Vendors are required to ship samples directly to the designated MTFs. Vendors will be given 14 calendar days to ship samples. Samples must arrive at the MTF by COB, 4PM local time, on the 14th calendar day after the notice to ship. Vendors failing to deliver by the deadline will be disqualified from further consideration in the standardization process. The MTFs will evaluate the clinical/performance criteria using a scale from one (1) to five (5) where 1 = Not Acceptable, 2 = Minimally Acceptable, 3 = Neutral, 4 = Acceptable, and 5 = Highly Acceptable. All clinical/performance criteria are weighted equally. The Government reserves the right to conduct evaluations in either a non-clinical or clinical setting or both. The CPT has established a target threshold of 3.0 for clinical acceptability of product for standardization. The CPT will analyze acceptability as being at or near 3.0 depending on the “break”, in the average scores and how closely the scores are clustered near the Acceptability Target Threshold of 3.0. Subject to this review, products below this threshold will be clinically unacceptable and be disqualified from further consideration for standardization. A Clinical Product Team (CPT) comprised of medical professionals from several disciplines will evaluate the products based upon on the following evaluation criteria to determine acceptability. Clinical/Performance Criteria 1.The catheter can be inserted easily and smoothly to prevent trauma to the tissue and vessel. 2.The maximum barrier feature protects the user against blood borne pathogen exposure. 3.The catheter is made of high quality sturdy material that resists kinks, bends and breakage to prevent injury to the patient. 4.The catheter has a feature that prevents needlestick injury to prevent the transmission of blood borne pathogens. 5.The catheter can be connected securely to tubing and other monitoring equipment to prevent leakage. Phase III – Pricing Analysis Process. All vendors who provide samples for clinical evaluation will be asked to submit best value pricing for analysis. Vendors will be given 14 calendar days from the date of request to submit their best pricing, in a prescribed format, based upon the total requirements of the Southwest Region. The Region intends to evaluate pricing and select a vendor or vendor(s), without discussions. Vendor pricing should contain the vendor's best product matches for the products or product lines requested in this announcement. Vendor pricing should contain the vendor's best tiered-pricing discounts off of the vendor's DAPA pricing (based on committed volume of 80% of the total requirements of the MTFs in the Region). Additionally, the Region reserves the right to conduct discussions and request revised pricing, if it is determined to be necessary. Pricing will be evaluated based on best value to the government and will be based on a committed volume for a two-year period with possible one-year option periods (not to exceed 5 years). The following elements will be considered in the pricing analysis: (1) Impact of RIA prices on the Region (Post-Standardization Costs), (2) Potential Cost Avoidance, (3) Impact of Unmatched Lines, and (4) Consideration of stockage keeping units (SKUs) by each vendor. Due to the potential for Base DAPA prices to be inflated, the Impact of RIA prices on the Region is considered more important than other pricing elements. Clinical/performance and technical/company factors will be weighted more heavily than price. Pricing will be evaluated based on best value to the government and will be based on a committed volume for a two-year period with possible one-year option periods (not to exceed 5 years). Failure to submit a discount off the DAPA price will result in exclusion.
- Web Link
-
FedBizOpps Complete View
(https://www.fbo.gov/?s=opportunity&mode=form&id=04c67da064e9b47f3365b0955ffa3649&tab=core&_cview=1)
- Record
- SN01549222-W 20080410/080408221403-04c67da064e9b47f3365b0955ffa3649 (fbodaily.com)
- Source
-
FedBizOpps Link to This Notice
(may not be valid after Archive Date)
| FSG Index | This Issue's Index | Today's FBO Daily Index Page |