SOLICITATION NOTICE
58 -- FPGA AND ACQUISITION CARD
- Notice Date
- 4/16/2008
- Notice Type
- Combined Synopsis/Solicitation
- NAICS
- 334290
— Other Communications Equipment Manufacturing
- Contracting Office
- NASA/Glenn Research Center, 21000 Brookpark Road, Cleveland, OH 44135
- ZIP Code
- 44135
- Solicitation Number
- NNC08245649Q
- Response Due
- 4/30/2008
- Point of Contact
- Nancy M. Shumaker, Purchasing Agent, Phone 216-433-2133, Fax 216-433-2480
- E-Mail Address
-
Nancy.M.Shumaker@nasa.gov
- Small Business Set-Aside
- Total Small Business
- Description
- This notice is a combined synopsis/solicitation for commercial items prepared inaccordance with the format in FAR Subpart 12.6, as supplemented with additionalinformation included in this notice. This announcement constitutes the onlysolicitation; offers are being requested and a written solicitation will not be issued.This notice is being issued as a Request for Quotations (RFQ)] for a FPGA andAcquisition Card in accordance with the following specifications:VME/VXS Signal Processing FPGA and Acquisition Card1. BASIC REQUIREMENT:This specification is for a single board and development software to be used within anexisting VME/VXS based system for the development of real-time communication waveformsand signal processing applications. The board shall be a VME, 6U form factor andimplement VXS board connections. The board shall meet the following minimumspecifications:All requirements shall be met with a single card or in combination with mezzanine cardfor acquisition (ADC and DAC), I/O expansion.The card shall fit into a single heightslot and shall not interfere with cards above or below its own slot.Shall provide a minimum of 2 A/D channels (non multiplexed input, non interpolating, andno sigma delta architectures) with a minimum 500M samples/sec sample rate and minimum of12 bit samples. Shall provide a minimum of 2, high speed D/A channels (no sigma delta architectures) eachwith a minimum sample rate of 500M samples/sec and minimum of 14 bit samples.Shall provide software and firmware in order to demonstrate the D/A, SFDR performance of>50dB at 500MHz clocking rate generating 165 MHz sine wave. Shall be compatible with a VME based system chassis with 6U format card support and VXS(VITA 41) support.Shall provide two on board VITA 41, ports A and B with 4 lanes each.All chassis boards to be 6U, VME/VXS form factor, VITA 41.0 compliant, and support Aurora and Gigabit Ethernet connectivity.All user defined FPGAs for user defined application use shall be Xilinx type FPGAs fromthe family of Virtex 5, LXT devices.Shall provide a minimum of 46K Virtex 5, slices of logic capability in single or up tofour FPGA devices. Virtex 5 slices are defined on Xilinx data sheets on their website. There shall be at least one FPGA interface to the on-board D/As.There shall be at least one FPGA interface to the on-board A/Ds.The board shall have a minimum of 2GBytes of SDRAM memory with DDR3 speed accessible byFPGA resources for development of FIFO buffers.All user define FPGAs for user defined applications shall have direct access to VXScommunication links, or directly linked to A/D or D/As.Shall provide a minimum of 16, user definable input or output I/O capability on and offthe board through back side or front side connectors that interface to at least one onboard FPGA.Operating environment of delivered, integrated system shall allow for operation in indoorenvironment.The board shall get all required power form the VME backplane.All boards to be supplied with developers kit containing FPGA interface wrapper code,interface software, constraints file and reference design.Shall provide IP cores for FPGAs interfaces to all devices on the board and supportingI/O ports and include as a minimum the following cores: fifo buffers, D/A interfaces, A/Dinterfaces, Gigabit Etherent, and clocking distribution.Documentation for each board shall provide sufficient detail to program the variousdevices, describe the data flow, describe the architecture, control the board, load userdefined program data in appropriate flash memory areas, interface specifications andelectrical connections, external I/O pin descriptions and locations, and descriptions ofwrapper code. The provisions and clauses in the RFQ are those in effect through FAC 05-24.This procurement is a total small business set-aside. The NAICS Code and the small business size standard for this procurement are 334290/750employees respectively. The offeror shall state in their offer their size status forthis procurement.All responsible sources may submit an offer which shall be considered by the agency.The DPAS rating for this procurement is DO-C9 Offers for the items described above are due by COB 04/30/08 to NASA/Glenn ResearchCenter, 21000 Brookpark Road, Cleveland, Ohio 44135-3127 and must include, solicitationnumber, proposed delivery schedule, discount/payment terms, warranty duration (ifapplicable), taxpayer identification number (TIN), identification of any specialcommercial terms, and be signed by an authorized company representative.http://server-mpo.arc.nasa.gov/Services/NEFS/NEFSHome.tml If the end product(s) offered is other than domestic end product(s) as defined in theclause entitled "Buy American Act -- Supplies," the offeror shall so state and shall listthe country of origin.FAR 52.212-4 (FEB 2007), Contract Terms and Conditions-Commercial Items is applicable. FAR 52.212-5 (JUNE 2007), Contract Terms and Conditions Required To Implement Statutesor Executive Orders-Commercial Items is applicable and the following identified clausesare incorporated by reference:[INSERT CLAUSE NUMBERS THAT ARE APPLICABLE FROMPARAGRAPHS (b) AND (c), e.g., 52.222-26].The FAR may be obtained via the Internet at URL: http://www.acquisition.gov/far/index.html The NFS may be obtained via the Internet at URL: http://www.hq.nasa.gov/office/procurement/regs/nfstoc.htm All contractual and technical questions must be in writing (e-mail or fax) to NancyShumaker not later than 04/29/08. Telephone questions will not be accepted.Selection and award will be made to that offeror whose offer will be most advantageous tothe Government, with consideration given to the factors of proposed technical merit,price, and past performance. Other critical requirements such as Delivery, Maintenance,etc. shall also be considered. It is critical that offerors provide adequate detail toallow evaluation of their offer. (SEE FAR 52.212-1(b)). Offerors must include completed copies of the provision at 52.212-3, OfferorRepresentations and Certifications - Commercial Items with their offer. These may beobtained via the internet at URL:http://prod.nais.nasa.gov/eps/Templates/Commercial_Greater_Than_25K.doc. Theserepresentations and certifications will be incorporated by reference in any resultantcontract.An ombudsman has been appointed -- See NASA Specific Note "B".Prospective offerors shall notify this office of their intent to submit an offer. It isthe offeror's responsibility to monitor the following Internet site for the release ofsolicitation amendments (if any):http://prod.nais.nasa.gov/cgi-bin/eps/bizops.cgi?gr=D&pin=22. Potential offerors willbe responsible for downloading their own copy of this combination synopsis/solicitationand amendments (if any).
- Web Link
-
FedBizOpps Complete View
(https://www.fbo.gov/?s=opportunity&mode=form&id=64653226261c4bca808d4dbca789b248&tab=core&_cview=1)
- Record
- SN01555332-W 20080418/080416220439-64653226261c4bca808d4dbca789b248 (fbodaily.com)
- Source
-
FedBizOpps Link to This Notice
(may not be valid after Archive Date)
| FSG Index | This Issue's Index | Today's FBO Daily Index Page |