SOLICITATION NOTICE
43 -- Auxiliary Seawater Pumps
- Notice Date
- 4/28/2008
- Notice Type
- Modification/Amendment
- NAICS
- 333911
— Pump and Pumping Equipment Manufacturing
- Contracting Office
- Department of Homeland Security, United States Coast Guard (USCG), Commanding Officer, USCG Engineering Logistics Center, 2401 Hawkins Point Road Building 31, Mail Stop 26, Baltimore, MD, 21226-5000, UNITED STATES
- ZIP Code
- 21226-5000
- Solicitation Number
- HSCG40-08-Q-50108
- Response Due
- 5/4/2008
- Point of Contact
- Nancy D Dean,, Phone: 410-762-6461, Sharon J. Jackson,, Phone: 410-762-6463
- E-Mail Address
-
nancy.m.dean@uscg.mil, sharon.j.jackson@uscg.mil
- Description
- This is a modification to the original synopsis. The U.S. Coast Guard Engineering Logistics Center intends to issue a solicitation and award a requirement type contract, with a base year and three (one year) option periods for the purchase of Auxiliary Seawater Pump Assembly for the 378’ Coast Guard Cutters. The solicitation will be issued on a brand name or equal basis using the brand name Blackmer System One. The following is the list of items that will be purchased: 500 GPM AUXILIARY SEAWATER PUMP ASSEMBLY Brand Name: BLACKMER SYSTEM ONE, Model LD17, SIZE 3 x 4 - 10, Blackmer Part Number 983109 or Equal. Offerors who propose an “Or Equal” shall submit literature, which addresses all salients described below. Coupled horizontal end-end suction centrifugal pump assembly with base plate, couplings, C-frame motor adapter and electric motor as a single assembly. Dimensions: Overall Height: 23.25 inches, Overall Width: 18 inches, Overall Length 58 inches. Service: Seawater Pump, Capacity: 500 GPM, Head: 90 FT, NPSHR; Less than 17 FT. Pump Material: CD4MCU Casing and Impeller IAW ASTM F998. Motor: 3500 RPM, 440VAC, 3-phase, 60 hertz, 284TSC frame, 1.15 Service Factor, TEFC, C-faced, IAW IEEE-45 and NEMA MG-1. Pump Shaft L3/d4 ((shaft overhang length)3/(shaft diameter)4) ratio: 17 Impeller Diameter: 6.25 inches Pump Seal: AW Chesterton 180-15 (1.875”) mechanical seal with Carbon/Sintered Silicon Carbide faces & EP elastomers. Pump Spare Parts Kit: Pump shall utilize parts found in Pan Pacific Pump Spare Parts Kit No. 03/801SPA008 or equal. The spare parts kit shall contain the following parts as a minimum: Item Part# Description Power End 099624 (System1 LD17) Mech seal 637305 (Chesterton 180 -15 CB/SSC/EP) Case Gasket 363409 (Chesterton.006 Carbon fibre / Nitrile) Impeller o-ring 098296 (Teflon) These items are packed in a Mil Spec Rolling Pelican Case #1620 Pump shall be equal to a Blackmer System One, Model LD17, Size 3 x 4 - 10, Pan Pacific Part Number 03/801AUX501 and Data for Provisioning (DFP) in accordance with Exhibit 1. Estimated quantities: 4 each for the base year through third option year. 500 GPM AUXILIARY SEAWATER PUMP ASSEMBLY Brand Name: BLACKMER SYSTEM ONE, Model LD17, SIZE 3 x 4 - 10, Blackmer Part Number 983110 or Equal. Offerors who propose an “Or Equal” shall submit literature, which addresses all salients described below. Coupled vertical end-end suction centrifugal pump assembly with base plate, couplings, C-frame motor adapter and electric motor as a single assembly. Dimensions: Overall Height: 49 inches, Overall Width: 18 inches, Overall Length 23.25 inches. Service: Seawater Pump, Capacity: 500 GPM, Head: 90 FT, NPSHR; Less than 17 FT. Pump Material: CD4MCU Casing and Impeller IAW ASTM F998. Motor: 3500 RPM, 440VAC, 3-phase, 60 hertz, 284TSC frame, 1.15 Service Factor, TEFC, C-faced, IAW IEEE-45 and NEMA MG-1. Pump Shaft L3/d4 ((shaft overhang length)3/(shaft diameter)4) ratio: 17 Impeller Diameter: 6.25 inches Pump Seal: AW Chesterton 180-15 (1.875”) mechanical seal with Carbon/Sintered Silicon Carbide faces & EP elastomers. Pump Spare Parts Kit: Pump shall utilize parts found in Pan Pacific Pump Spare Parts Kit No. 03/801SPA008 or equal. The spare parts kit shall contain the following parts as a minimum: Item Part# Description Power End 983106 (System1 LD17) Mech seal 637305 (Chesterton 180 -15 CB/SSC/EP) Case Gasket 363409 (Chesterton.006 Carbon fibre / Nitrile) Impeller o-ring 098296 (Teflon) These items are packed in a Mil Spec Rolling Pelican Case #1620 Pump shall be equal to a Blackmer System One, Model LD17, Size 3 x 4 - 10, Pan Pacific Part Number 03/801AUX501 and Data for Provisioning (DFP) in accordance with Exhibit 1. Estimated quantities: 4 each for the base year through third option year. 900 GPM AUXILIARY SEAWATER PUMP ASSEMBLY Brand Name: BLACKMER SYSTEM ONE, Model LD17, SIZE 4 x 6 - 13, Blackmer Part Number 983111 or Equal. Offerors who propose an “Or Equal” shall submit literature, which addresses all salients described below. Coupled vertical end - end suction centrifugal pump assembly with base plate, in-line suction adapter, couplings, C-frame motor adapter and electric motor as a single assembly. Dimensions: Overall Height: 72 inches, Overall Width (front to back): 24.5 inches, Overall Width (side to side): 31 inches. Service: Seawater Pump, Capacity: 900 GPM, Head: 115 FT, NPSHR; Less than 17 FT. Pump Material: CD4MCU Casing and Impeller IAW ASTM F998. Motor: 1775 RPM, 440VAC, 3-phase, 60 hertz, 324TC frame, 1.15 Service Factor, TEFC, C-faced, IAW IEEE-45 and NEMA MG-1. Pump Shaft L3/d4 ((shaft overhang length)3/(shaft diameter)4) ratio: 17 Impeller Diameter: 11.125 inches Pump Seal: AW Chesterton 180-15 (1.875”) mechanical seal with Carbon/Sintered Silicon Carbide faces & EP elastomers. Pump Spare Parts Kit: Pump shall utilize parts found in Pan Pacific Pump Spare Parts Kit No. 03/801SPA008 or equal. The spare parts kit shall contain the following parts as a minimum: Item Part# Description Power End 983106 (System1 LD17) Mech seal 637305 (Chesterton 180 -15 CB/SSC/EP) Case Gasket 363409 (Chesterton.006 Carbon fibre / Nitrile) Impeller o-ring 098296 (Teflon) These items are packed in a Mil Spec Rolling Pelican Case #1620 Pump shall be equal to a Blackmer System One, Model LD17, Size 4 x 6 - 13, Pan Pacific Part Number 03/801AUXX01 These items are packed in a Mil Spec Rolling Pelican Case #1620 (2) Data for Provisioning (DFP) only required in the base year and (3) Testing Certification. In addition, the contractor will also be required to provide Engineering Documentation Package (EDP) with their quotation. The resultant contract is to be a requirements contract with a base and three option years. Delivery will be F.O.B. Destination to U.S. Coast Guard ISC Alameda Building 42, Coast Guard Island Alameda, CA 94501. Delivery schedule for the pumps and test certification shall be 70 calendar days after issuance of Delivery Order; The DFP shall be delivered 30 calendar days after issuance of delivery order and the EDP shall be submitted with the contractor’s quote. Any Contractor offering an “or equal” shall be required to provide literature which addresses all salient characteristics. All responsible sources may submit an offer, which shall be considered by the agency. The solicitation will be posted on FedBizOps on or about May 15, 2008. This is an estimated date only and it is the contractor’s responsibility to check FedBizopps on a regular basis for the solicitation and any amendments issued.
- Web Link
-
FedBizOpps Complete View
(https://www.fbo.gov/?s=opportunity&mode=form&id=e662869bb0bdf5b7253ab5264c4091ae&tab=core&_cview=1)
- Record
- SN01562616-W 20080430/080428220213-e662869bb0bdf5b7253ab5264c4091ae (fbodaily.com)
- Source
-
FedBizOpps Link to This Notice
(may not be valid after Archive Date)
| FSG Index | This Issue's Index | Today's FBO Daily Index Page |