SOLICITATION NOTICE
J -- Machining, Refurbishing, Repairing, Assembly, Test Services on Submarine Antenna, Periscope and HM&E Equipment
- Notice Date
- 5/6/2008
- Notice Type
- Presolicitation
- NAICS
- 334220
— Radio and Television Broadcasting and Wireless Communications Equipment Manufacturing
- Contracting Office
- Department of the Navy, Naval Sea Systems Command, NSWC Carderock Division, N65540 NAVAL SHIP SYSTEM ENGINEERING STATION, CARDEROCK DIVISION, PA Naval Surface Warfare Center Naval Business Center, Naval Base Philadelphia, PA
- ZIP Code
- 00000
- Solicitation Number
- N6554008R0022
- Point of Contact
- Karen L Cane,, Phone: 215-897-1180
- E-Mail Address
-
karen.cane@navy.mil
- Small Business Set-Aside
- N/A
- Description
- The Naval Surface Warfare Center, Carderock Division, Philadelphia intends to procure machining, welding, assembly, testing, repair, refurbishment and restoration of Naval Submarine Antenna, Periscope and Communication Systems/Components, as well as various Naval Submarine and Surface Craft's Hull, Mechanical and Electrical (HM&E) systems/components. Work may be one of a kind for prototype manufacture, equipment modification or repair, as well as limited production run manufacturing to support urgent requirements in support of the Naval Submarine and Surface Fleet. The following maching, equipment and facilities capability must be available for use within the contractor's site to provide the services required under this contract: Engine Lathe, Drill Press, Milling Machine, Grinder, Vertical Boring Mill, Calibrated Layout Table, Material Handling Equipment, Welding Equipment, Optical Alignment Equipment, Hydrostatic Equipment, Surface Plate (able to accommodate a 23 foot fairing), Precise Inspection Tools, Hydraulic Power Plant, Paint Booth, Electrical Testing Equipment, Mast Antenna Assembly/Cylinder Test Stand and Closure Door Systems Test Stand. The contractor must possess the following test equipment and specialized services, or be able to demonstrate the ability to obtain such: Services of a laboratory approved by NSWCCD for reporting oil contamination, in accordance with NAVSEA Tech Manual S9086-S4-STM-010/CH-556R5 and Mechanical and optical equipment suitable for obtaining straightness and alignment readings for the required assemblies/subassemblies and their relationship to each other when assembled as a system. An alignment scope with auto-collimation capabilities and suitable fixture and required inspection tools. The contractor shall have an assembly area large enough to assemble a 23 ft. Mast Fairing, a 17.5 ft. Hydraulic Cylinder with a 16 ft. Stroke and a 17 ft. Antenna. The area should be able to accommodate at least three (3) concurrent assemblies. The contractor's quality assurance system must comply with MIL-I-45208 or ANSI/ISO/ASQ Q9001-2000. A time and material contract is anticipated for five year period for an estimated 243,000 hours of effort. Offerors will be required to submit technical and cost proposals. Offers will be evaluated and award will be made on low, cost technically acceptable. This requirement is 100% set-aside for small business. The solicitation will be released on or about 21 April 2008 and will close 45 days thereafter. All interested parties may download the solicitation and any amendments at http://www.neco.navy.mil or http://www.fedbizopps.gov at the approximate date lited for release of the solicitation. NOTE: Drawings will not be included in the solicitation package. The drawings include a Distribution Statement of "D". Such documents will be provided separately to contractors who specifically request them from the contract specialist designated in the synopsis and are registered in the Joint Certification Program (JCP), which is managed by the Defense Logistics Information Services (DLIS). The Joint Certification Program established the eligibility of a U.S. or Canadian contractor to receive technical data governed by DOD Directive 5230.25. The Directive sets forth policies, procedures and responsiblities for the withholding of unclassified technical data from public disclosure. DOD Directive 5230.4, a companion directive, establishes the distribution marking system for DOD controlled technical documents. To become certified to receive controlled technical documents, contractors must submit a complete DD Form 2345 to the JCO. Refer to www.dlis.dls.mil/jcp for additional information on obtaining the required certification. If the contractor intends to have foreign nationals work on this contract, the contractor must have an export license.
- Web Link
-
FedBizOpps Complete View
(https://www.fbo.gov/?s=opportunity&mode=form&id=5db528908114d8818591073ded01e45b&tab=core&_cview=1)
- Record
- SN01567527-W 20080508/080506220340-5db528908114d8818591073ded01e45b (fbodaily.com)
- Source
-
FedBizOpps Link to This Notice
(may not be valid after Archive Date)
| FSG Index | This Issue's Index | Today's FBO Daily Index Page |