SOLICITATION NOTICE
65 -- Diego Handpiece and Somnus Machine
- Notice Date
- 6/5/2008
- Notice Type
- Presolicitation
- NAICS
- 423450
— Medical, Dental, and Hospital Equipment and Supplies Merchant Wholesalers
- Contracting Office
- Department of the Air Force, Direct Reporting Units, USAF Academy - 10 MSG/LGC, 8110 Industrial Drive, Suite 200, USAF Academy, Colorado, 80840-2315
- ZIP Code
- 80840-2315
- Solicitation Number
- Diego-Handpiece
- Archive Date
- 6/27/2008
- Point of Contact
- Patrica Richmond,
- E-Mail Address
-
patricia.richmond@usafa.af.mil
- Small Business Set-Aside
- N/A
- Description
- Intent to Award Brand Name Diego Powered Dissector and Drill System 10th Mission Support Group, Directorate of Contracting, United States Air Force Academy Colorado, intends to award a brand name only commercial purchase order in accordance with FAR Parts 12 & 13. This notice document and incorporated provisions and clauses are those in effect through Federal Acquisition Circular 2005-14, 22 Nov 06. The North America Industry Classification System Code [NAICS] is 423450 and the size standard is 500 employees. The requirement is to purchase: 2 each Product number 70339001 Diego Handpiece, 1 each part number 7035-3001 Somnus Machine (G3) and 1 each shipping and handling. These items will require identification adhering to DFARS 252.211-7003 (http://farsite.hill.af.mil). The justification for the brand name requirement is as follows: a. Currently, the OR Department and ENT clinic have a problem of double booking cases because the two Departments have to use the same equipment. The purchase of this equipment will eliminate this problem. However, the two areas will still be able to share equipment. Therefore, the equipment must be the same so it can be interchangeable and be utilized by both the OR and clinic. The OR also needs to increase the number of Diego Shaver Hand pieces to support the increased caseload after the hospital transitions to a Surgery Center. b. The ENT surgeons use various Gyrus products on a weekly basis for most of their surgical procedures. Certain minor procedures utilizing Gyrus products are also used in the ENT clinic. All equipment must be interchangeable with existing pieces. Our surgical technicians, nurses, and ENT doctors have been trained on and are proficient with the Gyrus Somnus Machine and Diego Hand pieces. In addition, skills are maintained by yearly training that is provided by Gyrus. If any other equipment were purchased there would be an unacceptable learning curve required to become proficient to a level that would not jeopardize a patients safety. If other brand hand pieces and machines were purchased, new compatible equipment would also have to be purchased. This would be a duplicated cost, plus would render the Gyrus equipment useless. Technical Data: The Gyrus G3 System Generator has two principal modes of operation: - The monopolar mode has controls for maximum temperature and energy delivered. The unit has readouts for total energy delivered, impedance, temperature for two thermocouples and time of energy delivery. - The bipolar mode has controls for output waveform type and power. The unit has readouts for set power and waveform. Connectors on the front panel include the monopolar connector for active electrode and dispersive electrode and separate dual bipolar connectors for PlasmaCision electrodes and bipolar instruments. The foot pedal is connected on the back panel. Accessories included with the generator are the electrodes, connector cable, footswitch and a power cable. Intended Use for the Diego Powered Dissector and Drill System: General ENT, Head and Neck, and Otoneurologic Procedures. Driver Configuration: Console with separate footswitch. Operating Speeds: Up to 18,000 rpm for sinus surgery and up to 44,000 rpm for otologic, otoneurologic and acoustic neuroma procedures. Operating Modes: Forward, Reverse, Oscillate. Speed Indication: Digital. Footswitch: Electric Irrigation Pump: Yes, integrated into console. Number of handpieces supported: 4, Diego, Stapes, and Viper Straight and Angled. Processor Control: 8-bit Microprocessor, Re-programmable (Factory Only). Material of Housing: Diego – Stainless Steel Nosecone and Aluminum Housiing. Viper Handpiece – Stainless Steel Nosecone and Aluminum Housing. Suction Capability: Yes for Shaver Handpiece No for Drill Handpiece. Irrigation Capability: Yes, with the exception of the Stapes Drill Handpiece. Chucking Mechanism: Diego is Spring Loaded and able to chuck in multiple positions. The Viper handpieces utilize locking rings and the Stapes uses a collet to secure the burrs. Sterilization Method: Autoclave or EO. All responsible sources may submit a response, which if timely received, will be considered by 10MSG/LGCB. The Government does not intend to pay for any information provided under this presolicitation notice. Point of Contact is Sam Richmond, Contract Specialist (719) 333-3948 email: (patricia.richmond@usafa.af.mil) or alternate Leslie Ryan, Contracting Officer (719) 333-3961 email: leslie.ryan@usafa.af.mil. 5352.201-9101 OMBUDSMAN (AUG 2005) (a) An ombudsman has been appointed to hear and facilitate the resolution of concerns from offerors, potential offerors, and others for this acquisition. When requested, the ombudsman will maintain strict confidentiality as to the source of the concern. The existence of the ombudsman does not affect the authority of the program manager, contracting officer, or source selection official. Further, the ombudsman does not participate in the evaluation of proposals, the source selection process, or the adjudication of protests or formal contract disputes. The ombudsman may refer the party to another official who can resolve the concern. (b) Before consulting with an ombudsman, interested parties must first address their concerns, issues, disagreements, and/or recommendations to the contracting officer for resolution. Consulting an ombudsman does not alter or postpone the timelines for any other processes (e.g., agency level bid protests, GAO bid protests, requests for debriefings, employee-employer actions, contests of OMB Circular A-76 competition performance decisions). (c) If resolution cannot be made by the contracting officer, concerned parties may contact the USAF Academy Ombudsmen, Lori Staples 8110 Industrial Drive, Ste 103 USAFA, CO 80840 Telephone number 719-333-3907 FAX 719-333-9018 email: lori.staples@usafa.af.mil Concerns, issues, disagreements, and recommendations that cannot be resolved at the MAJCOM/DRU level, may be brought by the concerned party for further consideration to the Air Force ombudsman, Associate Deputy Assistant Secretary (ADAS) (Contracting), SAF/AQC, 1060 Air Force Pentagon, Washington DC 20330-1060, phone number (703) 588-7004, facsimile number (703) 588-1067. (d) The ombudsman has no authority to render a decision that binds the agency. (e) Do not contact the ombudsman to request copies of the solicitation, verify offer due date, or clarify technical requirements. Such inquiries shall be directed to the Contracting Officer. (End of clause) Point of Contact(s): Sam Richmond, Contract Specialist, Phone 719-333-3948, Fax 719-333-9103, Email patricia.richmond@usafa.af.mil
- Web Link
-
FedBizOpps Complete View
(https://www.fbo.gov/?s=opportunity&mode=form&id=f6de26a26222f7cda95efa238074432d&tab=core&_cview=1)
- Place of Performance
- Address: 4102 Pinion Dr, Ste 3, USAF Academy, Colorado, 80840, United States
- Zip Code: 80840
- Zip Code: 80840
- Record
- SN01587832-W 20080607/080605220755-f6de26a26222f7cda95efa238074432d (fbodaily.com)
- Source
-
FedBizOpps Link to This Notice
(may not be valid after Archive Date)
| FSG Index | This Issue's Index | Today's FBO Daily Index Page |