SOLICITATION NOTICE
51 -- Tools/Equipment for Facility Section
- Notice Date
- 6/30/2008
- Notice Type
- Modification/Amendment
- Contracting Office
- Department of State, FedBid.com -- for Department of State procurements only., FedBid.com, US EMbassy Panama, APO, AA 34002
- ZIP Code
- 34002
- Solicitation Number
- PR296702
- Response Due
- 7/14/2008
- Archive Date
- 1/10/2009
- Point of Contact
- Name: Teresa R. Guardia, Title: Procurement Agent, Phone: 5072077309, Fax: 5072077141
- E-Mail Address
-
guardiatr@state.gov;
- Small Business Set-Aside
- N/A
- Description
- AMENDMENT NOTICE: This is a combined synopsis/solicitation for commercial items prepared in accordance with the format in FAR Subpart 12.6, in conjunction with FAR 13.5, as applicable, and as supplemented with additional information included in this notice. This announcement constitutes the only solicitation; bids are being requested and a written solicitation will not be issued. The solicitation number is PR296702 and is issued as an invitation for bids (IFB), unless otherwise indicated herein. The solicitation document and incorporated provisions and clauses are those in effect through Federal Acquisition Circular FAC 2005-24. The associated North American Industrial Classification System (NAICS) code for this procurement is 561210 with a small business size standard of $32M. This requirement is unrestricted and only qualified offerors may submit bids. The solicitation pricing on www.FedBid.com will start on the date this solicitation is posted and will end on 2008-07-14 15:00:00.0 Eastern Time or as otherwise displayed at www.FedBid.com. FOB Destination shall be Miami, FL 33178 The Department of State requires the following items, Exact Match Only, to the following: LI 001, Lightweight, portable oxyacetylene outfit cuts up to 1" steel, weld up to 1/8" steel, brazes up to 2 1/8" copper tubing with welding tip, and brazes up to 2 5/8" copper tubing using a rosebud tip., 2, EA; LI 002, High Speed Air Sander, Accepts Pad Sizes 3, 4, and 5 Inch, Air Flow 24 CFM, Air Inlet NPT 1/4 Inch, Average Air Flow 6.0 CFM, Free Speed 14,000 RPM, Required Pressure 90 PSI, Minimum Hose Size 3/8 Inch, Length 5 Inches, Impact Resistant Aluminum Housing And Handle., 3, EA; LI 003, Heavy Duty Table Saw, Depth of Cut @ 90 Degrees 4 Inches, Depth of Cut @ 45 Degrees 2 3/4 Inches, Rip Left Cutting Capacity 9 1/8 Inches, Rip Right Cutting Capacity 50 Inches, No Load Speed 3500 RPM, Table Dimensions in Front of Blade 12 3/4 Inches, Table Dimensions with Extension 48 x 30 Inches, Overall Height with Stand 35 1/2 Inches, Cabinet Depth 23 Inches, Cabinet Width 29 Inches, Depth of Cut @ 45 Degrees 2 3/4 Inches., 1, EA; LI 004, Drill Bit Set, Size 1/16 to 1/2 Inches, 29 Pieces, Pilot Point., 1, EA; LI 005, Hole Saw Kit, Bimetal Master Electrician, M3 High Speed Steel Cutting Edge with Hardened Steel Backer, Number of Pieces 12, Max Cutting Depth 1 1/2 In, Thread Size 1/2-20 And 5/8-18 In, For Wood Or Metal Doors, Light Gauge Sheetmetal & Mild Steel, Includes 3/4, 7/8,1 1/8, 1 3/8,1 1/2, 1 3/4 2, 2 1/4, 2 1/2 Inch Hole Saws, 2 Arbors 12 Inch Extension And Plastic Case., 4, EA; LI 006, Cordless Combination Kit, Volts 18.0, 1GEB8 Hammer Drill, 4EB86 Circular Saw, 4CY88 Reciprocating Saw, 3WE97 & 4BU70 SDS Rotary Hammer, 5LA45 Jigsaw, 3WY80 Cut Off Tool, 4JB71 Cut Out Tool, 3WE97 & 4BU70 Impact Tool, 4LG25 Light, Battery Pack Replacement (2) 4GA70, Charger 5MP78, 2 Contractor Bags Carrying Case., 1, EA; LI 007, Cordless Combination Kit, Volts 18.0, 1EZ39 Drill, 1GEB8 Hammer Drill, 4EB86 Circular Saw, 4CY88 Reciprocating Saw, 4BU70 SDS Rotary Hammer, 5LA45 Jigsaw, 3WY80 Cut Off Tool, 4JB71 Cut Out Tool, 4BU70 Impact Tool, 4LG25 Light, Battery Pack Replacement (2) 4GA70, Charger 5MP78, 2 Contractor Bags Carrying Case., 1, EA; LI 008, Bi Metal Hole Saw Kit, Industrial, M3 High Speed Steel Cutting Edge with Hardened Steel Backer, Number of Pieces 19, Max Cutting Depth 1 1/2 In, Teeth Postive Rake Variable Pitch, Teeth per Inch 4/6, Arbor Requires Arbors Included with kit, Arbor Size 1/4 and 7/16 In Hex, Thread Size 1/2-20 and 5/8-18 In, Includes 3/4,7/8,1,1 1/8,1 3/8,1 1/2,1 3/4,2,2 1/8,2 1/4,2 1/2,3,3 1/4,3 5/8,3 3/4,4 1/4,4 1/2 Dia Hole Saws, 3 Arbors, 1 7/16 In Hex Extension., 3, EA; LI 009, Accessory Kit, Number of Pieces 100, Includes Black Oxide Pilot Point Drill Bits 16 Pcs 1/16-3/8 In, Compact Drive Guide, Clear Drive Guide, Nutdriver Sizes 1/4-3/8 In, Socket Adapter 1/4 and 3/8 In, Sockets 1/4-7/16 In with 1/4 In Drive, 1/2 and 9/16 In with 3/8 In Drive, Black Oxide Drill Bits 6 Pcs 1/16-1/4 Inch with 1/4 In Hex Shank, 3 Drywall Dimplers, Rapid Load Holder, Screwdriver Bits 58 Pcs Phillips, Square, Slotted and Double Ended Bits, Carrying Case., 12, EA; For this solicitation, Department of State intends to conduct an online competitive reverse auction to be facilitated by the third-party reverse auction provider, FedBid, Inc. FedBid has developed an online, anonymous, browser based application to conduct the reverse auction. An Offeror may submit a series of pricing bids, which descend in price during the specified period of time for the aforementioned reverse auction. Department of State is taking this action in an effort to improve both vendor access and awareness of requests and the agency's ability to gather multiple, competed, real-time bids. All responsible Offerors that respond to this solicitation MUST submit the pricing portion of their bid using the online exchange located at www.FedBid.com. There is no cost to register, review procurement data or make a bid on www.FedBid.com. Offerors that are not currently registered to use www.FedBid.com should proceed to www.FedBid.com to complete their free registration. Offerors that require special considerations or assistance may contact the FedBid Helpdesk at 877-9FEDBID (877-933-3243) or via email at clientservices@fedbid.com. Offerors may not artificially manipulate the price of a transaction on www.FedBid.com by any means. It is unacceptable to place bad faith bids, to use decoys in the www.FedBid.com process or to collude with the intent or effect of hampering the competitive www.FedBid.com process. Should offerors require additional clarification, notify the point of contact or FedBid at 877-9FEDBID (877-933-3243) or clientservices@fedbid.com. Use of FedBid: Buyers and Sellers agree to conduct this transaction through FedBid in compliance with the FedBid Terms of Use. Buyers and Sellers understand that FedBid ranks all bids by price; however, pursuant to applicable acquisition regulations and/or departmental guidelines, Buyers may use criteria other than price to evaluate offers. Accordingly, please note that, unless otherwise specified herein below, to the extent required by applicable regulations and/or guidelines, award will be made to the responsible Seller whose offer conforming to the solicitation will be most advantageous to the Buyer on the basis of price, technical capability, delivery, and past performance. In addition to providing pricing at www.FedBid.com for this solicitation, each Offeror must provide any required, NON-PRICING responses (e.g. technical proposal, representations and certifications, etc.) directly to guardiatr@state.gov (NOT THROUGH FEDBID.COM) so that they are received at that email address no later than the closing date and time for this solicitation. The selected Offeror must comply with the following commercial item terms and conditions. FAR 52.212-1, Instructions to Offerors - Commercial, applies to this acquisition. The selected Offeror must submit a completed copy of the provision at 52.212-3, Offeror Representations and Certifications - Commercial Items. FAR 52.212-4, Contract Terms and Conditions - Commercial Items, applies to this acquisition. The following FAR clauses in paragraph (b) of FAR clause 52.212-5, Contract Terms and Conditions Required To Implement Statutes or Executive Orders-Commercial Items, will apply: 52.222-21, 52.222-26, 52.222-35, 52.222-36, 52.222-37, 52.225-13, 52.232-34. The full text of a FAR clause may be accessed electronically at http://www.acqnet.gov/far. Delivery shall be made to our Consolidating agency within 30 days or less after receipt of order (ARO). CCR Requirement - Company must be registered on Central Contractor Registration (CCR) before an award could be made to them. If company is not registered in CCR, they may do so by going to CCR web site at http://www.ccr.gov. The Contractor and its employees shall exercise the utmost discretion in regard to all matters relating to their duties and functions. They shall not communicate to any person any information known to them by reason of their performance of services under this contract which has not been made public, except in the necessary performance of their duties or upon written authorization of the Contracting Officer. All documents and records (including photographs) generated during the performance of work under this contract shall be for the sole use and become the exclusive property of the U.S Government. Furthermore, no article, book, pamphlet, email, recording, broadcast, speech television appearance, film or photograph concerning any aspect of work performed under this contract shall be published or disseminated through any media without the prior written authorization of the Contracting Officer. These obligations do no cease upon the expiration or termination of this contract. The Contractor shall include the substance of this provision in all contracts of employment and in all subcontracts hereunder.
- Web Link
-
FedBizOpps Complete View
(https://www.fbo.gov/?s=opportunity&mode=form&id=52ffaf368ae7e3d6a5acd4869a5d4229&tab=core&_cview=1)
- Place of Performance
- Address: Miami, FL 33178
- Zip Code: 33178
- Zip Code: 33178
- Record
- SN01603794-W 20080702/080630215511-52ffaf368ae7e3d6a5acd4869a5d4229 (fbodaily.com)
- Source
-
FedBizOpps Link to This Notice
(may not be valid after Archive Date)
| FSG Index | This Issue's Index | Today's FBO Daily Index Page |