SOLICITATION NOTICE
48 -- valve, linear, direct
- Notice Date
- 7/9/2008
- Notice Type
- Modification/Amendment
- NAICS
- 332999
— All Other Miscellaneous Fabricated Metal Product Manufacturing
- Contracting Office
- Defense Logistics Agency, DLA Acquisition Locations, Defense Supply Center Columbus BSM, P O Box 3990, Columbus, Ohio, 43216-5000
- ZIP Code
- 43216-5000
- Solicitation Number
- spm7m208r0116
- Response Due
- 8/25/2008
- Archive Date
- 9/9/2008
- Point of Contact
- jana m engels-stinson, Phone: 6146921582
- E-Mail Address
-
jana.engels-stinson@dla.mil
- Small Business Set-Aside
- N/A
- Description
- Proposed solicitation is for NSN 4810-00-470-6533. Item is a Valve, linear, direct. Solicitation is for a basic quantity of 130 each going to New Cumberland PA 17070. Solicitation contains a 100% option which may or may not be exercised. FOB destination is required. Inspection is at origin. The solicitation is 100% set aside for small business. All responsible sources may submit an offer which shall be considered. See Numbered Note #26. This solicitation will be made available on it’s issue date of July 25, 2008, AT HTTPS://WWW.DIBBS.BSM.DLA.MIL/. PLEASE NOTE: THE SOLICITATION WILL NOT BE AVAILABLE UNTIL THE ISSUE DATE. While price may be a significant factor in the evaluation of offers, the final award decision will be based upon a combination of price, delivery, past performance and other evaluation factors as described in the solicitation. A written offer is required and is to be returned to the bid room at Defense Supply Center Columbus, PO Box 3990, Columbus, OH 43218-3990, or can be faxed to 614-692-4275. In a final rule contained in the Federal Acquisition Circular 01-26 (Item 1, FAR Case 2002-24) published in the Federal Register on December 20, 2004, the Federal Acquisition Regulation was amended to require offerors to submit representations and certification electronically via the Business Partner Network. The ORCA can be found at http://orca.bpn.gov. VALVE ASSEMBLY, SELECTOR. I.A.W. ARMY (19207) P/N 10921566 EXCEPTIONH TO DRAWING: USE MIL-W-63150 IN LIEU OF SQAP-APPENDIX-RIA. PROCESS PROCEDURES AND OR WORKMANSHIP SPECIMENS REQUIRED BY MILITARY SPECIFICATION (S) APPLICABLE TO THIS CONTRACT WILL BE APPROVED BY THE ACTIVITY RESPONSIBLE FOR THE ADMINISTRATION OF THE CONTRACT. POSTAWARD PREPRODUCTION APPROVAL VERIFYING THE REQUIREMENTS OF MIL-DTL-16232 IS REQUIRED. IF AQLS ARE LISTED IN THE SPECIFICATION(S) OR DRAWING(S) THEY MAY BE USED TO ESTABLISH THE AUTHORIZED SAMPLE SIZE, HOWEVER, THE ACCEPTANCE NUMBER FOR THIS CONTRACT IS ZERO; I.E., THIS CONTRACT REQUIRES A SAMPLING PLAN THAT ACCEPTS ON ZERO DEFECTS AND REJECTS ON ONE OR MORE DEFECT(S). THIS NSN CONTAINS ONE OR MORE COMPONENTS WHICH MUST MEET QPL/QML SPECIFICATIONS. BY SUBMITTING AN OFFER, THE OFFEROR AGREES TO PROVIDE QPL/QML COMPONENTS ONLY FROM SOURCES QUALIFIED ON THE APPLICABLE QPL(S)/QML(S). "CLASS I OZONE DEPLETING CHEMICALS ARE NOT TO BE USED NOR INCORPORATED IN ANY ITEMS TO BE DELIVERED UNDER THIS CONTRACT. THIS PROHIBITION SUPERSEDES ALL SPECIFICATION REQUIREMENTS BUT DOES NOT ALLEVIATE ANY PRODUCT REQUIREMENTS. SUBSTITUTE CHEMICALS MUST BE SUBMITTED FOR APPROVAL UNLESS THEY ARE AUTHORIZED BY THE SPECIFICATION REQUIREMENTS." SUPPLEMENTAL QUALITY ASSURANCE PROVISIONS (SQAP) ALL TYPES. THE INTERNATIONAL ORGANIZATION FOR STANDARDIZATION (ISO) 9002 OR A "TAILORED" PROGRAM MEETING THE FOLLOWING ISO 9002 PARAGRAPHS APPLIES: 4.5, DOCUMENT CONTROL: LIMITED TO INSPECTION AND TESTING AS WELL AS APPLICABLE DRAWINGS, SPECIFICATIONS AND INSTRUCTIONS REQUIRED BY CONTRACT 4.6, PURCHASING: 4.6.1 AND LIMITED TO 4.6.2 A) AND 4.6.4.2, ALL OTHER PARTS OF PARAGRAPH ARE HEREBY DELETED 4.7, CUSTOMER-SUPPLIED PRODUCT: 4.8, PRODUCT IDENTIFICATION & TRACEABILITY: 4.10, INSPECTION & TESTING: 4.11, INSPECTION, MEASURING & TEST EQUIPMENT: 4.12, INSPECTION AND TEST STATUS: 4.13, CONTROL OF NONCONFORMING PRODUCT: 4.14, CORRECTIVE AND PREVENTIVE ACTION: PARAGRAPH 4.14.3 APPLY TO PRODUCT ONLY 4.16, QUALITY RECORDS: FAR CLAUSE 52.246-11 APPLIES DLAD CLAUSE 52.246-9004, PRODUCT VERIFICATION TESTING, IS HEREBY INCORPORATED, AND MAY BE INVOKED AT THE DISCRETION OF THE PROCUREMENT ACTIVITY. FULL AND OPEN COMPETITION APPLY "DETAILED DRAWING (ONE ITEM)" QUALITY ASSURANCE PROVISION "REFERENCE MATERIAL-INCLUDES HANDBOOKS, MANUALS, PRICE LISTS, REGISTRIES, DIRECTORIES, BOOKS, ETC." THE SPECIFICATION OR STANDARD CITED IS TO BE USED IN LIEU OF THE DOCUMENT IDENTIFIED WITHIN THE PARENTHESES. CRITICAL APPLICATION ITEM I/A/W DRAWING NR 19200 10921564 REFNO AMEND NR E DTD 04/07/86 TYPE NUMBER I/A/W QAP 19200 10921564 REFNO AMEND NR H DTD 04/07/86 TYPE NUMBER I/A/W QAP 19200 10921566 REFNO AMEND NR D DTD 04/07/86 TYPE NUMBER I/A/W DRAWING NR 19200 11635952 REFNO AMEND NR A DTD 04/16/90 TYPE NUMBER I/A/W QAP 19200 11635955 REFNO AMEND NR C DTD 01/03/84 TYPE NUMBER I/A/W DRAWING NR 19200 11635955 REFNO AMEND NR C DTD 04/16/90 TYPE NUMBER I/A/W DRAWING NR 19200 11635956 REFNO AMEND NR A DTD 08/06/85 TYPE NUMBER I/A/W QAP 19200 11635956 REFNO AMEND NR E DTD 08/06/85 TYPE NUMBER I/A/W DRAWING NR 19200 11635957 REFNO AMEND NR A DTD 01/03/84 TYPE NUMBER I/A/W QAP 19200 11635957 REFNO AMEND NR F TYPE NUMBER I/A/W DRAWING NR 19200 11652517 REFNO AMEND NR A DTD 09/16/80 TYPE NUMBER I/A/W DRAWING NR 19200 7407417 REFNO AMEND NR M DTD 08/31/89 TYPE NUMBER P/N 8346053 I/A/W DRAWING NR 19200 7973617 REFNO AMEND NR R DTD 09/20/89 TYPE NUMBER I/A/W QAP 19200 7973617 REFNO AMEND NR P DTD 01/19/90 TYPE NUMBER I/A/W QAP 19204 11635950 REFNO AMEND NR A DTD 09/20/71 TYPE NUMBER I/A/W QAP 19204 11635951 REFNO AMEND NR A DTD 04/15/77 TYPE NUMBER I/A/W QAP 19204 11635953 REFNO AMEND NR D DTD 04/15/77 TYPE NUMBER I/A/W QAP 19204 11635954 REFNO AMEND NR B DTD 04/15/77 TYPE NUMBER I/A/W DRAWING NR 19207 10921566 BASIC AMEND NR C TYPE NUMBER I/A/W QAP 19207 10958316 REFNO AMEND NR TYPE NUMBER I/A/W DRAWING NR 19207 11635950 REFNO AMEND NR TYPE NUMBER I/A/W DRAWING NR 19207 11635951 REFNO AMEND NR TYPE NUMBER I/A/W DRAWING NR 19207 11635953 REFNO AMEND NR TYPE NUMBER I/A/W DRAWING NR 19207 11635954 REFNO AMEND NR TYPE NUMBER I/A/W QAP 19207 1201 REFNO AMEND NR C DTD 02/01/92 TYPE NUMBER I/A/W DRAWING NR 19207 7982399 REFNO AMEND NR E DTD 09/30/97 TYPE NUMBER I/A/W DRAWING NR 19207 8335127 REFNO AMEND NR TYPE NUMBER I/A/W SPEC NR MIL-W-63150(3) NOT 2 REFNO AMEND NR 3 TYPE NUMBER
- Web Link
-
FedBizOpps Complete View
(https://www.fbo.gov/?s=opportunity&mode=form&id=4ae1a9bcf5073c05bf6bac9e03a09793&tab=core&_cview=1)
- Record
- SN01609880-W 20080711/080709221623-4ae1a9bcf5073c05bf6bac9e03a09793 (fbodaily.com)
- Source
-
FedBizOpps Link to This Notice
(may not be valid after Archive Date)
| FSG Index | This Issue's Index | Today's FBO Daily Index Page |