SOLICITATION NOTICE
65 -- CAD/CAM Dental Milling Unit
- Notice Date
- 8/5/2008
- Notice Type
- Combined Synopsis/Solicitation
- NAICS
- 339114
— Dental Equipment and Supplies Manufacturing
- Contracting Office
- Department of the Air Force, Air Education and Training Command, Tyndall AFB Contracting Squadron, 501 Illinois Ave, Ste 5, Bldg 647, Tyndall AFB, Florida, 32403-5526
- ZIP Code
- 32403-5526
- Solicitation Number
- FM481972550148-ESTEV
- Archive Date
- 8/29/2008
- Point of Contact
- Joshua A Estevez,, Phone: 850-283-1260
- E-Mail Address
-
joshua.estevez@tyndall.af.mil
- Small Business Set-Aside
- Total Small Business
- Description
- This is a request for quotes for Tyndall AFB for the following commercial item(s): Request a CEREC inLab CAD/CAM Dental Milling Unit/Restorative System for image capture, design, and fabrication of ceramic copings, multi-unit bridge understructure components, full contour inlays, onlays, and crowns. Includes system components, hardware, CEREC inLab system, AK 50 Milling Activation Key, software, and basic operating manuals. TECHNICAL DESCRIPTION: Digital feed control with force monitoring for sensitive processing of ceramic materials, Process-controlled milling motors, positioning step size is 6.25 um, milling repeatability is +/- 25 um, milling speed is 1.0 - 1.5 mm/min., grain size is 64 um, speed is 60.000 rpm, step Bur 12, step Bur 20, cylinder pointed Bur 12, cylinder pointed Bur 20, type designation "inLab MC XL" milling unit, rated line voltage is 100V - 230V AC, rated power frequency is 50/60 Hz, rated current is 1.5 - 3.5 A, nominal power output is 320 VA, permissible line voltage fluctuations is +/- 10% of nominal voltage, type of protection against electric shock is Class 1 device, degree of protection against ingress of water is ordinary device (without protection against ingress of water), overvoltage category is II, ambient conditions is for indoor use pollution degree 2 air pressure: 700 hPa - 1060 hPa, temperature range is 5 C to 40 C, humidity range is 80% rel. up to 31 C decreasing to 50 % rel. up to 40 C, mode of operation is continuous operation, dimensions (WxHxD) in mm is 700x420x400, approximate weight is 40 kg, non contact optical measurement, digital control of the axes for quick measurement, measuring speed is approximately 5 mm/min., measuring technique is active triangulation, active suppression of reflections, low noise photodiode array, laser light source: wavelength is 670 nm and focus diameter is - or = to 25 um, scan range scanning technique is 45 model 50x20x16 in mm, 15 model 50x20x12 in mm, crown frame-work 16x25 in mm, real time micro controller with micro stepping, 4 DC motor controllers with integrated speed and motor control and force monitoring, Ethernet, RJ45 interface 10 Mbit/sec, and integrated WLAN bridge for radio transmission. Should also have the option for on-site training, conducted with all members of the laboratory/clinic team at Tyndall AFB. North American Industrial Classification System (NAICS) code 339114 applies to this procurement. Award will be based on best value to the government. All quotes must either be emailed to joshua.estevez@tyndall.af.mil or faxed to Amn Joshua A Estevez at 850-283-3963. Quotes are required to be received no later than 12:00PM CST, Thursday, August 5, 2008.
- Web Link
-
FedBizOpps Complete View
(https://www.fbo.gov/?s=opportunity&mode=form&id=75acd44a4c9270918997943020b0cf38&tab=core&_cview=1)
- Place of Performance
- Address: Tyndall AFB, Panama City, Florida, 32403, United States
- Zip Code: 32403
- Zip Code: 32403
- Record
- SN01631296-W 20080807/080805221732-75acd44a4c9270918997943020b0cf38 (fbodaily.com)
- Source
-
FedBizOpps Link to This Notice
(may not be valid after Archive Date)
| FSG Index | This Issue's Index | Today's FBO Daily Index Page |