SOLICITATION NOTICE
34 -- J&A FOR W91ZLK-08-T-0573
- Notice Date
- 8/5/2008
- Notice Type
- Combined Synopsis/Solicitation
- NAICS
- 333515
— Cutting Tool and Machine Tool Accessory Manufacturing
- Contracting Office
- Department of the Army, Army Contracting Agency, North Region, ACA, Aberdeen Proving Ground, ACA, Aberdeen Proving Ground, Directorate of Contracting, 4118 Susquehanna Avenue, Aberdeen Proving Ground, MD 21005-3013
- ZIP Code
- 21005-3013
- Solicitation Number
- W91ZLK-08-T-0573-01
- Response Due
- 8/11/2008
- Archive Date
- 10/10/2008
- Point of Contact
- Shirley G. Ziervogel, 410-278-0871
- Small Business Set-Aside
- N/A
- Description
- Control JA08-21 Limited Sources Justification and Approval Document FOR OTHER THAN FULL AND OPEN COMPETITION of Requirements Not Exceeding $550,000 ( IAW FAR 8.405-6(2)) 1. Contracting Activity: MICC, Enterprise and Installation Operations, APG 2. Description of Action: Requirement:1 New 0 Repeat Pricing:1 Firm-Fixed Price 0 Time & Materials0 Cost Funds:1 OMA 0 Other Funds: Name of Proposed Contractor:Shad OBrien/Phillips Corporation Street Address:7390 Coca Cola Drive City, State, Zip:Hanover, MD 21076 Phone:1-800-878-4747 3. Description of Services: The estimated value of proposed action is $209,113.59 Describe the services or supplies, including make & model number, to be acquired below. HAAS: TL-1 Computer Numerical Control Lathe with options, 2 ea. $96,649.27 Total for Two HAAS: TM-1 Computer Numerical Control Mill with options, 2 ea. $112,464.32 Total for two NOTE: Pricing includes installation, Four day on-site training courses for both machines and warranty. 4. Authority Cited: (Identify the statutory authority, FAR title and FAR citation permitting other than full and open competition. It may be one of the following, but other exceptions may be used.) 1 (a) 10 USC 2304(c)(1) or 41 USC 253(c)(1); FAR 6.302-1: Only one responsible source and no other supplies or services will satisfy agency requirements OR 0 (b) 10 USC 2304(c)(2) or 41 USC 253(c)(2); FAR 6.302-2: Unusual and compelling urgency. 5. Reason for Authority Cited: (State why this is the only source that can provide the required supplies or services.) 0 (a) Services can only be provided from the original source as this is a follow-on requirement for the continued provision of highly specialized services. 0 (b) Award to any other source would result in substantial duplication of cost to the Government that is not expected to be recovered through competition. 0 (c) Services/Supplies are needed immediately to satisfy mission requirements. 1 (d) OMMS has been mandated by the Commanding General to consolidate training with other Agencies within DOD to mitigate costs to the Government and maintain consistency. Award to any other source or manufacturer will result in a failure to meet mission requirements and can NOT meet the Government's needs: after contacting manufacturers other than HAAS, I found that the option of merging manual machining and CNC machining is the latest technology and is not available through other manufacturers. The ability of a machine produced by HAAS to record the part fabrication process done by hand, (manual) and then be able to reproduce the same part repetitively, accurately and quickly by numeric control (CNC) alone is a capability not offered by any other manufacturer. This feature is only offered by HAAS. In addition, other manufacturers offer CNC machines which require the user to know special codes in order to operate. This is training that the Army does not provide such as (G code). The additional training costs associated with learning the codes represents needless expenses for the Government that we cannot justify when the HAAS machines are available without requiring the use of special codes. HAAS incorporates the novice machinist into the CNC world of machining. Through market research, three additional manufacturers of CNC machines were approached. The manufacturers were Harding, Mazak and Clausing. Ive determined thru research that HAAS offers the only American made equipment that has a common and integrated platform which is HAAS- specific unlike the three mentioned before. This is not a retrofit system i.e. some parts from Bridgeport, some parts from Fagor and some parts from Manford. HAAS eliminates the need to contact multiple support elements for maintenance, thereby reducing needless maintenance costs. HAAS also offers the only machines comparable to the size that the Army requires in its effort to field a mobile machine shop. The other manufacturers offer machines of a larger size that do not support this effort, therefore negatively impacting the success of the Armys mission.
- Web Link
-
FedBizOpps Complete View
(https://www.fbo.gov/?s=opportunity&mode=form&id=61f46e159aec7aa435e60adb090a66b9&tab=core&_cview=1)
- Place of Performance
- Address: ACA, Aberdeen Proving Ground Directorate of Contracting, 4118 Susquehanna Avenue Aberdeen Proving Ground MD
- Zip Code: 21005-3013
- Zip Code: 21005-3013
- Record
- SN01631540-W 20080807/080805222443-61f46e159aec7aa435e60adb090a66b9 (fbodaily.com)
- Source
-
FedBizOpps Link to This Notice
(may not be valid after Archive Date)
| FSG Index | This Issue's Index | Today's FBO Daily Index Page |