SOLICITATION NOTICE
Z -- Paving Entrance and Exit approaches at Badlands National Park.
- Notice Date
- 8/16/2008
- Notice Type
- Presolicitation
- Contracting Office
- Department of the Interior, National Park Service, NPS - All Offices, MWR - Black Hills Contracting - Mt Rushmore National Memorial 13000 Hwy 244, Bldg. 31, Suite 1 Keystone SD 57751
- ZIP Code
- 57751
- Solicitation Number
- Q130008A095
- Archive Date
- 8/16/2009
- Point of Contact
- Ron Eilefson Lead Contract Specialist 6055743130 Ron_Eilefson@nps.gov;<br />
- Small Business Set-Aside
- Total Small Business
- Description
- The National Park Service has requirement for Paving of Entrance and Exit Approaches at Badlands National Park, Inteior, South Dakota.The project consists of the paving of the approaches in accordance with SDDOT Specifications. price should include mobilization, no prime or flush included, no traffic control, no subgrade prep, proof rooling, or final finish. areas must be ready to pave. Mobilization ACP 6 inch SDDOT E1 W/64-ww Compacted in 2 inch lifts, ACP 6" SDDOT Specs E1 WPG64-22. Place hot-mix asphalt to required grade, cross section, and thickness. Compacted thickness of each lift shall not exced 3 inches. Promptly correct surface irregularaties in paving course. Spread mix at a minimum temperature of 250 degrees F. Begin compaction as soonas placed hot-mix paving will bear roller weight without excessive displacement. compact hot-mix paving with hot, hand tampers or vibratory-plate compactors in areas inaccessible to rollers. Complete compaction before mix temperature colls to 185 degrees F. Complete breakddown or initial rolling immediately after rolling joints and outside edge. Examine surface immediately after breakdown rolling for indicated crown, grade, and smoothness. Bein immediate rolling after breakdown rolling while hot-mix asphalt is still hot enough to achieve specified density. Continue rolling until hot-mix asphalt course has been uniformly compacted to 92 percent of reference maximum theoretical density according to ASTM D2041. Finish roll paved surfaces to remove roller marks wwhile hot-mix asphalt is still warm. Remove and restore paved areas that are defective or contaminated. The magnitude of this project is under $25,000.00. NAICS Code: 237310, P&S Z222. This project is 100% set aside for small business. PAPER COPIES OF THIS SOLICITATION WILL NOT BE ISSUED AND TELEPHONE REQUESTS OR FAX REQUESTS FOR THE SOLICITATION WILL NOT BE ACCEPTED. This solicitation will be available ONLY!! at the DOI Webiste (http://ideasec.nbc.gov) O/A August 26,2008 and unless amendments are issued extending the solicitation, the offers are due in this office on September 9, 2008 by 4:30 PM MT. In order to download a copy of the solicitation vendors will be asked to register their company with the electronic commerce website. Be prepared with your company DUNS Number, available from Dun and Bradstreet at 1-888-546-0024 and your federal Tax Identification Number (TIN). All vendors should pre-register with ORCA and the CCR by logging into http://www.ccr.gov. Your point of contact for this project is Ronald Eilefson, Contracting Officer 605-574-3130. Email ron_eilefson@nps.gov. All responsible sources may submit an offer which if submitted in a timely manner, will be considered. The Government rserves the right to cancel this announcement and the resulting solicitation. This announcement does not constitute a solicitation.
- Web Link
-
FedBizOpps Complete View
(https://www.fbo.gov/?s=opportunity&mode=form&id=28cedffa8ee10ec8dc1fd0f510fa8e81&tab=core&_cview=1)
- Place of Performance
- Address: Badlands National Park25216 Ben Reifel RoadInterior, SD 57750<br />
- Zip Code: 57751<br />
- Zip Code: 57751<br />
- Record
- SN01642578-W 20080818/080816214907-28cedffa8ee10ec8dc1fd0f510fa8e81 (fbodaily.com)
- Source
-
FedBizOpps Link to This Notice
(may not be valid after Archive Date)
| FSG Index | This Issue's Index | Today's FBO Daily Index Page |